Influence of third monomer on the crystal phase transition behavior of ethylene-tetrafluoroethylene copolymer

Crystal phase transition between the low- and high-temperature phases has been investigated for ethylene (E)-tetrafluoroethylene (TFE) alternating copolymer (ETFE) containing the third monomeric species by the temperature dependent measurements of wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) and differential scanning calorimetry. Nonafluoro-1-hexene (NFH) and hexafluoropropylene (HFP) were chosen as the third monomers, where they are different in the side-branch length, -(CF₂)₃CF₃ and -CF₃, respectively. In the case of E/TFE/NFH copolymer (ET-C4F9), the crystal phase transition temperature of the original ETFE two-components copolymer was not very much affected by the existence of NFH in the range of NFH content from 0.7 to 3 mol%. Contrarily, the crystal phase transition temperature of E/TFE/HFP copolymer (ET-CF3) was found to decrease drastically with increasing HFP content. The melting temperature and the higher-order structure were also affected sensitively depending on the HFP content. This difference in phase transition behavior between ET-C4F9 and ET-CF3 copolymers is reasonably interpreted as follows: the short side groups (-CF₃) of HFP monomeric unit are included in the crystal lattice of E/TFE chains and the unit cell is expanded gradually with an increment of the HFP content, resulting in the decrease in phase transition point because of easier thermal motion of the chains. On the other hand, the long side groups [-(CF₂)₃CF₃] of NFH monomeric units are excluded out of the crystal lattice and located on the lamellar surfaces or in the amorphous region and do not affect very much the phase transition temperature even when the NFH content is increased. In association with such a change in crystal structure, the long period of stacked lamellar structure was found to decrease remarkably in the case of NFH, whereas it does not change very much for HFP, consistent with the interpretation of the above-mentioned WAXD data.     

Functional copolymer of geraniol and acrylonitrile: Synthesis and characterization

The radical copolymerization of acyclic terpene namely geraniol [GER] with acrylonitrile [AN] in DMF at (70 ± 0.1)°C for 1 h, using benzoylperoxide (BPO) as an initiator has been carried out under inert atmosphere of nitrogen. The kinetic expression for reaction is R_p ∝ [BPO]^0.5 [AN]^1.0 [GER]^1.0. The IR spectrum of the copolymer shows bands at 3432 and at 2244 cm^?1 due to ? OH group of GER and ? CN group of AN, respectively. The ¹³C‐NMR spectrum shows peaks at 73–75 δ ppm and 116–120 δ ppm due to ? OH group of GER and ? CN group of AN, respectively. The thermogravimetric analysis and differential scanning calorimetry study shows that copolymer is thermally stable up to 407°C and has glass transition temperatures (T_g) 56°C. The reactivity ratios r₁ (AN) and r₂ (GER) have been calculated as 0.05 and 0.005, respectively. The Alfrey‐Price Q‐e parameter for GER has been calculated as 0.094 and ?2.0, respectively. The molecular weights of the copolymers have been evaluated by gel‐permeation chromatography. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Time and temperature effect on the linear–nonlinear viscoelastic transition threshold of a polymeric system

In the present study, the transition of a polymeric material from the linear to the nonlinear viscoelastic behavior and the determination of the nonlinearity stress threshold variation with time and temperature are investigated. For this purpose a systematic experimental program consisted of thermal and mechanical characterization of certain polymeric material followed by isothermal creep tests at different stress levels and temperatures was conducted. Through isochronal curves that occurred from creep tests, the nonlinearity threshold dependence on both time and temperature is presented. The reported results provide information that is critical for the design and development of polymer structures and components. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Upconversion emission of a novel glass ceramic containing Er: BaYF5 nano-crystals

In order to develop highly efficient upconversion (UC) material, Er³⁺-doped oxyfluoride glass ceramics containing BaYF₅ nano-crystals were fabricated for the first time. The randomly distributed BaYF₅ nano-particles with the size of nearly 25 nm precipitated from the glass matrix at about 700 °C, then tended to aggregate slightly with the increase of heating temperature, resulting in the enhancement of Er³⁺ UC emission in the wavelength ranging from 500 nm to 700 nm. The UC process was found very sensitive to Er³⁺ content: with the increase of Er³⁺ content from 0.5% to 1.0%, the UC intensity behaved with drastic exaltation; while further increasing Er³⁺ content to 2.0% resulted in a notable fluorescence quenching. Significantly, the UC efficiency of present glass ceramic preponderates notably over that of the previously reported glass ceramic containing LaF₃, implying its superior UC potentiality.     

Effect of composition on gelation kinetics of unfilled and nanoapatite-filled poly(lactide-ethylene oxide-fumarate) hydrogels

Oscillatory shear rheometry at small strains was used to investigate the effects of composition (concentration of macromer, crosslinker, initiator/accelerator, and filler) on the gel point and ultimate storage modulus of poly(l-lactide-co-ethylene oxide-co-fumarate) (PLEOF) hydrogels. PLEOF in situ polymerizing hydrogels can be used as biodegradable scaffolds for cell encapsulation and tissue regeneration. The time evolution of the viscoelastic properties of the polymerizing mixture during the sol-gel transition was monitored using mechanical rheometry. According to the results, while the ultimate storage modulus linearly increased with the concentration of methylene bisacrylamide (BISAM) crosslinker, the values of the storage and loss moduli at the gel point were insensitive to the concentration of BISAM. Similar behavior was observed for PLEOF hydrogels reinforced with hydroxyapatite nanoparticles.     

Bruchanalyse an Hohlgläsern

Failure analysis of hollow glasses The failure analysis is very important to clarify damages of hollow glasses. Damages of glass bottle through over pressure are very often linked with damages to persons. This is the reason why the causal research is from particular importance. Different surface characteristics of glass fragments as well as the fracture pattern give hints to the direction of the crack, the stress just before breakage and the reason of stress. A reconstruction of the bottle is a further helpful instrument for cause studies. The difference of the various characteristics of the surface will be explained. Further on there will be discussed different reasons and mechanism of fracture.     

A Standard Model-Theoretic Approach to Operational Semantics of Recursive Programs

In this paper we try to introduce a new approach to operational semantics of recursive programsby using ideas in the“priority method”which is a fundamental tool in Recursion Theory.In lieu ofmodelling partial functions by introducing undefined values in a traditional approach,we shall define apriority derivation tree for every term,and by respecting the rule“attacking the subterm of thehighest priority first”we define transition relations,computation sequences etc.directly based on astandard interpretation which includes no undefined value in its domain.Finally,we prove that ournew approach generates the same operational semantics as the traditional one.It is also pointed outthat we can use our strategy to refute a claim of Loeckx and Sieber that the opperational semanticsof recursive programs cannot be built based on predicate logic.     

Effet de la pression sur la transition ruisselant-pulsé dans les réacteurs catalytiques à lit fixe arrosé

The effect of pressure on transition displacement between trickle and pulsed regimes (TPR: trickle-pulsed transition) in catalytic trickle bed reactors (CTBR) is not properly predicted by existing theoretical models and empirical correlations. Based on high pressure TPR data available to date, a modified Charpentier diagram is proposed to quantify directly the effect of pressure in non-foaming systems.     

Influence of Drying Conditions on Ascorbic Acid during Convective Drying of Whole Persimmons

Degradation kinetics of food constituents may be related to the matrix molecular mobility by glass transition temperature. Our objective was to test this approach to describe ascorbic acid degradation during drying of persimmons in an automatically controlled tray dryer with temperatures (40 to 70°C) and air velocities (0.8 to 2.0 m/s) varying according a second order central composite design. The Williams-Landel-Ferry model was satisfactorily adjusted to degradation curves for both control strategies adopted—constant air temperature and temperature fixed inside the fruit. Degradation rates were higher at higher drying temperatures, independent of the necessary time to attain the desired moisture content.