Pre-Activation of CO2 at Cobalt Phthalocyanine-Mg(OH)2 Interface for Enhanced Turnover Rate

Cobalt phthalocyanine (CoPc) anchored on heterogeneous scaffold has drawn great attention as promising electrocatalyst for carbon dioxide reduction reaction (CO₂RR), but the molecule/substrate interaction is still pending for clarification and optimization to maximize the reaction kinetics. Herein, a CO₂RR catalyst is fabricated by affixing CoPc onto the Mg(OH)₂ substrate primed with conductive carbon, demonstrating an ultra-low overpotential of 0.31 ± 0.03 V at 100 mA cm⁻² and high faradaic efficiency of >95% at a wide current density range for CO production, as well as a heavy-duty operation at 100 mA cm⁻² for more than 50 h in a membrane electrode assembly. Mechanistic investigations employing in situ Raman and attenuated total reflection surface-enhanced infrared absorption spectroscopy unravel that Mg(OH)₂ plays a pivotal role to enhance the CO₂RR kinetics by facilitating the first-step electron transfer to form anionic *CO₂⁻ intermediates. DFT calculations further elucidate that introducing Lewis acid sites help to polarize CO₂ molecules absorbed at the metal centers of CoPc and consequently lower the activation barrier. This work signifies the tailoring of catalyst-support interface at molecular level for enhancing the turnover rate of CO₂RR.     

降低电镀镍/金印制板的不良率

随着电子工业的快速发展,高密度集成电路和BGA封装器件也广泛用于军用电子产品,新的器件和焊接工艺对印制电路板的表面可焊涂覆层提出了新的要求,其不但要求涂覆层有良好的可焊性,而且要求涂覆层平整,印制板电镀镍/金涂层不但表面平整,可焊性好而且具有较好的三防性能和较长的存放期,因此,电镀镍/金印制板正逐渐被应用于高密度的军用电子产品,本文就印制板电镀镍/金过程中出现的问题进行探讨和交流。     

Sub‐Nanometer Level Size Tuning of a Monodisperse Nanoparticle Array Via Block Copolymer Lithography

The fabrication and catalytic application of a size‐tunable monodisperse nanoparticle array enabled by block copolymer lithography is demonstrated. Highly uniform vertical cylinder nanodomains are achieved in poly(styrene‐block‐4‐vinylpyridine) (PS‐b‐P4VP) diblock copolymer thin‐films by solvent annealing. The prominent diffusion of the anionic metal complexes into the protonated P4VP cylinder nanodomains occurs through specific electrostatic interactions in a weakly acidic aqueous solution. This well‐defined diffusion with nanoscale confinement enables preparation of the laterally ordered monodisperse nanoparticle array with sub‐nanometer level precise size tuning. The controlled growth of monodisperse nanoparticle arrays is proven by their catalytic use for vertical carbon nanotube (CNT) growth via plasma enhanced chemical vapor deposition (PECVD). Since the size of the catalyst particles is the decisive parameter for the diameters and wall‐numbers of CNTs, the highly selective growth of double‐walled or triple‐walled CNTs could be accomplished using monodisperse nanoparticle arrays.     

The Heterointerface between Fe1/NC and Selenides Boosts Reversible Oxygen Electrocatalysis

The rational design and construction of efficient and inexpensive bifunctional oxygen electrocatalysts are highly desirable for the development of rechargeable Zn–air batteries (ZABs). Although single-atom Fe sites anchored on N-doped carbon catalysts (Fe₁/NC) ensure high oxygen reduction reaction activity, their unitary atomically dispersed active center faces difficult condition in catalyzing oxygen evolution reaction simultaneously. Herein, a composite catalyst containing heterointerface between Fe₁/NC and selenides ((Fe,Co)Se₂) is constructed. The obtained (Fe,Co)Se₂@Fe₁/NC exhibits extremely narrow potential gap of 0.616 V and remarkable stability in alkaline media, outperforming the benchmark catalysts (Pt/C+RuO₂: 0.720 V). Experimental results and density functional theory calculations reveal that heterointerface between Fe₁/NC and (Fe,Co)Se₂ accelerates the electron transfer and provides more moderate adsorption sites, which endow (Fe,Co)Se₂@Fe₁/NC with extremely high bifunctional oxygen catalytic activity. This study not only provides a superior bifunctional catalyst for ZABs, but also enriches the application of single-atom catalysts in multifunctional energy storage and conversion devices.     

Ni3N–CeO2 Heterostructure Bifunctional Catalysts for Electrochemical Water Splitting

Developing low-cost and high-efficient bifunctional catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is greatly significant for water electrolysis. Here, Ni₃N-CeO₂/NF heterostructure is synthesized on the nickel foam, and it exhibits excellent HER and OER performance. As a result, the water electrolyzer based on Ni₃N-CeO₂/NF bifunctional catalyst only needs 1.515 V@10 mA cm⁻², significantly better than that of Pt/C||IrO₂ catalysts. In situ characterizations unveil that CeO₂ plays completely different roles in HER and OER processes. In situ infrared spectroscopy and density functional theory calculations indicate that the introduction of CeO₂ can optimizes the structure of interface water, and the synergistic effect of Ni₃N and CeO₂ improve the HER activity significantly, while the in situ Raman spectra reveal that CeO₂ accelerates the reconstruction of O_V (oxygen vacancy)-rich NiOOH for boosting OER. This study clearly unlocks the different catalytic mechanisms of CeO₂ for boosting the HER and OER activity of Ni₃N for water splitting, which provides the useful guidance for designing the high-performance bifunctional catalysts for water splitting.     

镍腐蚀的影响因素与改善方法探讨

镍腐蚀是指发生在化学镍金的化镍、沉金过程中发生的金对镍的攻击过度造成局部位置或整体位置镍腐蚀的现象,严重者则导致＂黑盘＂的出现,严重影响PCB的可靠性。报告通过评估分析镍腐蚀影响的因素,提出相应的改善方法,改善流程的稳定性。     

Platinum‐Coated Hollow Graphene Nanocages as Cathode Used in Lithium‐Oxygen Batteries

One of the formidable challenges facing aprotic lithium‐oxygen (Li‐O₂) batteries is the high charge overpotential, which induces the formation of byproducts, loss in efficiency, and poor cycling performance. Herein, the synthesis of the ultrasmall Pt‐coated hollow graphene nanocages as cathode in Li‐O₂ batteries is reported. The charge voltage plateau can reduce to 3.2 V at the current density of 100 mA g^?1, even maintain below 3.5 V when the current density increased to 500 mA g^?1. The unique hollow graphene nanocages matrix can not only provide numerous nanoscale tri‐phase regions as active sites for efficient oxygen reduction, but also offer sufficient amount of mesoscale pores for rapid oxygen diffusion. Furthermore, with strong atomic‐level oxygen absorption into its subsurface, ultrasmall Pt catalytically serves as the nucleation site for Li₂O₂ growth. The Li₂O₂ is subsequently induced into a favorable form with small size and amorphous state, decomposed more easily during recharge. Meanwhile, the conductive hollow graphene substrate can enhance the catalytic activity of noble metal Pt catalysts due to the graphene‐metal interfacial interaction. Benefiting from the above synergistic effects between the hollow graphene nanocages and the nanosized Pt catalysts, the ultrasmall Pt‐decorated graphene nanocage cathode exhibits enhanced electrochemical performances.     

Development of lateral flow immunoassay for rapid control and quantification of the presence of the colorant Sudan I in spices and seafood

The lateral flow immunoassay for colorant Sudan I detection was developed using the monoclonal antibody to Sudan I conjugated with gold nanoparticles. Conditions of the assay were optimized for both qualitative control and quantification of Sudan I in food matrixes with minimal dilution of the extracting media (final content of methanol – 50%). In the case of photometric registration, the limit of Sudan I detection in extracts was 2.5 ng/mL (which corresponds to 10 μg/kg of food and spices), and the working range of determined concentrations was 13–240 ng/mL. The average error of measurements varied from 5.5 to 16.9%. The visual limit of detection, which is the minimum concentration causing absence of visible coloration at the test zone, was 1 μg/mL. The assay efficiency was confirmed by its application to determine Sudan I content in highly colored spices (turmeric, curry) and seafood (caviar, mussels, fish). Thus, the developed assay is suitable as a rapid, inexpensive tool for revealing Sudan I quantification by mobile laboratories and in out-of-laboratory conditions.