功率GaAs MESFET的热阻测试

阐述了功率ＧａＡｓＭＥＳＦＥＴ器件热阻测试中温敏参数ＶＧＳＦ和测试电流Ｉｍ的选取，给出了１～５Ｗ器件典型温敏参数的温度测试系数Ｍ与测试电流Ｉｍ的关系。讨论了测试延迟时间ｔｍｄ对△ＶＧＳＦ测量值的影响和三种校正方法。     

应用浅层测温法寻找油气藏

地温法是非地震物化探手段中的一种常用方法，在油气普查和勘探方面已得到广泛应用，并取得了显著效果。简要介绍了地温法寻找油气藏的仪器设备、基本原理、适用范围及特点，并举例说明了其应用效果。应用高精度测温仪，通过开展浅层地温测量和研究，可以达到寻找油气的目的。     

计算机在热处理工艺编制中的应用

利用计算机强大的数据处理功能 ,对热处理工艺中的各种数据进行记录和处理 ,并制成各种图表 ,掌握其中的各种规律。使热处理工艺的编制不再是一种经验积累式的工作 ,而是依照其规律制定一次合格的规范的热处理工艺卡片 ,并为将来计算机工艺自动生成的工作打下基础     

Influence of thermal boundary conditions on natural convection in a square enclosure partially heated from below

Natural convection in air-filled 2D square enclosure heated with a constant source from below and cooled from above is studied numerically for a variety of thermal boundary conditions at the top and sidewalls. Simulations are performed for two kinds of lengths of the heated source, i.e., a small and a large source corresponding to 20% and 80% of the total length of the bottom wall, respectively. The Rayleigh number varied from 10³ to 10⁷. Results are presented in the form of streamline and isotherm plots as well as the variation of the Nusselt number and maximum temperature at the heat source surface. Comparisons among the different thermal configurations considered are reported.     

Heat loss and thermoelectric generator design

With the object of evaluating its importance to thermoelectric generator design, heat loss is introduced into the standard thermoelectric generator design theory. The theory for both the constant hot and cold junction temperatures model and the constant heat input model are so modified. The modification is first order and, therefore, is limited to small leg heat-transfer coefficients. Numerical results using representative properties show that significant differences can exist between the optimum geometry and performance of a generator idealized as lossless and those of a generator designed by the modified theory. The largest differences occur with the constant heat input model.     

Effect of RE on Granulation of Eutectic Carbide in Ledeburite Steel

ＲｅｃｅｎｔｌｙｔｈｅｂｅｎｅｆｉｃｉａｌａｃｔｉｏｎｓｏｆＲＥｏｎｉｒｏｎａｎｄｓｔｅｅｌｓｈａｖｅｂｅｅｎｒｅｐｏｒｔｅｄａｒｏｕｎｄｔｈｅｗｏｒｌｄ．ＲＥｃａｎｎｏｔｏｎｌｙｄｅｏｘｉｄｉｚｅａｎｄｄｅｓｕｌｐｈｕｒｉｚｅｔｈｅｍｅｌｔａｎｄｆ...     

高效辐射换热器的研制

本文所介绍的高效辐射换热器是指在其环缝通道中安装有网状二次传热面的辐射换热器，用对比实验方法研究了它们在空气预热温度、给热系数和阻力系数上的差别．实验表明：高效辐射换热器可强化空气侧的传热，其综合传热系数达５９Ｗ／（ｍ２·℃），而阻力系数可控制在３０００Ｐａ以内．     

Third-generation CALPHAD description of pure GeO2 at 1 atm

The thermodynamic properties of crystalline and liquid/amorphous phases of germanium dioxide have been evaluated using DFT calculations and third-generation CALPHAD models. The values for the standard entropies of crystalline and amorphous phases were reassessed through use of the Planck-Einstein approach. This allowed a more physically-based representation of the set of thermodynamic properties of germanium dioxide to be obtained.     

组合肋板式陶瓷换热器材质的研究

以耐火粘土、高矾土及滑石为原料研制了堇青石基陶瓷材料,并对其组织和性能尤其是抗热震性进行了研究。结果表明,堇青石基上分布着针状莫来石的材料具有更高的抗热震性。对评价换热器用陶瓷材料抗热震性参数进行了讨论,指出抗热震损伤参数R″″更适合于作为优选陶瓷换热器用材质的指标。     

一种新型硅三端负阻器件

提出并研制成一种新型硅三端负阻器件。该器件由一n沟耗尽型MOS管、一横向pnp双极晶体管和一个电阻集成而得。它具有“双负阻”特性和正阻区阻值易于控制等特点。由理论计算出的器件I_c—V_(CB)特性和负阻参数与实验结果符合良好。