Microstructural transformations of heat affected zones in duplex steel welded joints

The influence of the welding thermal conditions exemplified by heat input and heat treatment after welding on the structure of the heat affected zone (HAZ) UNS S31803 has been analysed. The post weld treatment was used to create the precisely defined thermal conditions for the decomposition of primary phases in the HAZ, by a multi-layer welding thermal cycle stimulation. Detailed analyses of the microstructure and chemical composition of the phases in the different post welded conditions were performed by scanning electron microscopy (SEM) combined with energy dispersive spectrometry (EDS) and transmission electron microscopy (TEM). Three types of secondary precipitates have been observed: secondary austenite (γ₂), carbides: M₂₃C₆ and M₇C₃. The dependence of the secondary austenite volume fraction and morphology in the HAZ on thermal cycle have been interpreted. The eutectoid decomposition of the primary phases in the analysed thermal conditions was confirmed.     

石油钻井用泥浆泵的新发展

泥浆泵已发展到大功率、大排量、高压力。为适应现代钻井技术的发展,钻井设备制造商开发出了性能更好,体积更小,质量更轻的泥浆泵,以满足钻井承包商适应各种钻井工况的需要。文章简要介绍了近几年国内外新出现的几种泥浆泵。     

DC-DC电荷泵的研究与设计

以Dickson电荷泵的基本原理为出发点，研究了一种将正电压输入转为负电压输出的开关电容电路。由于开关电容的充放电特点，为确定电容时间常数，采用非交叠时钟控制信号避免了由于时钟交叠而造成的当电容充电还未完成即对下一级电容进行放电的现象。同时，参考功率MOS-FET的电容模型通过增大驱动电路的电流减小了开关管的上升延时，提高了开关动作的速度，使转换效率得到明显提高。此电路结构简单，性能优良，易于集成，可广泛应用于输出负电压的电源产品中。     

Thermal Generation of Residual Stress Fields for Purpose of Distortion Minimization

Thermal treatments of steel components with the goal of hardening often result in distortion by releasing the residual stresses which were brought into the specimen during the preceding processing steps. The goal of the presented work is the minimization of this distortion. By generating definite residual stress fields and investigating the resulting distortion, the distortion mechanism can be observed in detail. A flexible and reproducible way to generate such residual stress fields inside a specimen is by means of local thermal treatment with a laser beam. Computer simulations as well as experiments were carried out using an idealized tooth of a gearwheel (finger sample) as a model system. The deformation of the samples due to the laser heat treatment and the stress fields generated inside the samples were determined with respect to different process parameters.     

氯气泵叶轮连续破碎原因

针对YLJ型液环式氯气泵叶轮在短期内频繁破碎的情况,对其破碎原因进行了分析,并提出相应的改进措施,使烧碱工艺系统保持了长、满、安、稳的运行状态。     

Heat transfer and flow of He II in narrow channels

Heat transfer and fluid flow of He II in a long, narrow channel connected to a bath that supplies a constant supply of heat have been investigated by numerical simulations by using the simplified model of Kitamura et al. [Cryogenics 37 (1) (1997) 1]. Such channels are used to cool compact, stable, low-temperature magnets. The fluid flow is driven by natural convection and the mutual friction between the normal fluid and the superfluid.In this model, the thermomechanical effect and the Goter-Mellink mutual friction balance each other. A consequence of this balance is that the velocity and temperature distributions of He II can be characterized by a dimensionless, dependent parameter equal to the ratio of the fluid speeds of internal convection to the total fluid flow. After a sudden application of heat flux, the internal convection dominates over the total fluid flow until the establishment of steady-state temperature gradients. This predicts that the time required to set up the steady-state total fluid flow is proportional to the total heat capacity in the channel.     

英台地区天然水驱油藏的开发特点及稳产技术

掌握边底水运动规律，控制并利用活跃的边底水能量，是成功开发天然水驱油藏的关键。英台地区的英台、四方坨子和一棵树等三个油田均为天然水驱油藏，天然能量充足。油藏投入开发后初期含水较高，含水上升极快，造成产油量大幅度递减。针对其开发特点，适时采用大泵、电潜泵提液强采，通过大量补孔层间接替以及加密调整和扩边等稳产技术措施，确保了油藏以3％-5％的采油速度长期稳产，水驱采收率高达50％以上。     

Optimum thermoeconomic and thermodynamic performance characteristics of an irreversible three-heat-source heat pump

The coefficient of performance and specific heating load of an irreversible three-heat-source heat pump are given by using a general cycle model affected by the finite-rate heat transfer, heat leak and internal irreversibility of the cyclic working fluid. The heat pumping load divided by the total cost per unit time is taken as a new objective function and used to investigate the performance of the heat pump. The thermoeconomic and thermodynamic performance characteristics of the heat pump are discussed in detail. Some important performance parameters such as the thermoeconomic objective function and coefficient of performance are optimized. The optimally operating regions of the heat pump and the bounds of several performance parameters are determined. Finally, it is pointed out that the Carnot heat pump may be taken as a special case of a three-heat-source heat pump and consequently its optimal performance can be directly derived from the results obtained here.     

现场总线技术的特点及其在热电站的应用

阐述了现场总线技术的含义、主要特点和优点,对比了现场总线控制系统与DCS系统的区别,介绍了现场总线技术在洛阳石化分公司热电站的典型应用及其发展前景。     

双柱塞砂浆泵中工作机构的设计和仿真研究

本文介绍了双柱塞砂浆泵的工作原理，根据机构替代原理建立起双柱塞砂浆泵工作机构的运动分析模型，然后在MatLab环境下，详细介绍了工作凸轮曲线的设计程序，利用计算机设计程序可以方便地分析工作缸活塞以及工作凸轮机构的位移、速度、加速度，利用SIMULINK仿真工具箱进行运动学仿真，为工作机构设计提供相应的理论分析依据。