冰箱匹配变频压缩机箱体振动高分析、研究与优化

本文针对冰箱系统匹配变频压缩机过程中存在的2000～3000rpm转速段箱体振动高问题进行了系统的分析与研究。采用模态分析法与振动响应相结合的技术手段,定位了箱体匹配的6个主要模态频率,并结合系统随转速变化的振动曲线加以分析,得出发生振动高的根本原因。同时结合声学理论知识,通过更换胶脚的方式使问题彻底解决。该研究成果为冰箱与压缩机在匹配过程中解决并优化其系统振动、提高整机的声品质提供了重要的科学依据和实践经验。     

Some system design considerations for a high switching frequency PWM inverter

A sinusoidal PWM inverter is required to faithfully reproduce the control waveforms at the output with minimum distortion. This paper presents some design considerations for such an inverter. The choice of switching frequency is the main criterion which affects the output voltage harmonic distortion at high switching frequencies. This paper shows that there exists an optimum switching frequency above which the output harmonic distortion becomes more visible. The dead time generator circuit for a low cost inverter and effect of driver circuits on the output waveform are discussed. Experimental results from laboratory models are presented.     

电信集中结算系统高可用建设研究

本文提出了电信集中结算高可用系统的基本概念．详细介绍了集中结算系统高可用性方面的建设方案，然后对集中结算系统在某省的运行情况进行了分析。     

High‐Performance Metal‐Substrate Power Module for Electrical Applications

This paper demonstrates the performance of a metal‐substrate power module with multiple fabricated chips for a high current electrical application, and evaluates the proposed module using a 1.5‐kW sinusoidal brushless direct current (BLDC) motor. Specifically, the power module has a hybrid structure employing a single‐layer heat‐sink extensible metal board (Al board). A fabricated motor driver IC and trench gate DMOSFET (TDMOSFET) are implemented on the Al board, and the proper heat‐sink size was designed under the operating conditions. The fabricated motor driver IC mainly operates as a speed controller under various load conditions, and as a multi‐phase gate driver using an N‐ch silicon MOSFET high‐side drive scheme. A fabricated power TDMOSFET is also included in the fabricated power module for three‐phase inverter operation. Using this proposed module, a BLDC motor is operated and evaluated under various pulse load tests, and our module is compared with a commercial MOSFET module in terms of the system efficiency and input current.     

高兼容性低成本无铅材料开发与应用

现今市面上主流的无铅材料多是中Tg和高Tg的产品,高的Tg的预示着高成本;目前全球经济持续低迷,给PCB行业也带来了不小的冲击,迫使各PCB厂家积极寻求低成本高性能的替代材料。CCL供应商推出的PN固化、添加无机填料的普通Tg无铅兼容材料无疑成为一大亮点,成为有效提升客户产品性价比和竞争力的首选。此类型材料除满足一般传统多层板的要求,在HDI板、高多层及厚铜板方面表现同样优秀,文章将逐一说明,以供大家参考和借鉴。     

高分辨率机载InSAR高程距离向空变误差定标方法

高分辨率机载干涉合成孔径雷达(Interferometric Synthetic Aperture Radar, InSAR)是获取高精度数字高程模型(Digital Elevation Model, DEM)的重要手段之一。由于主副天线距离向相位方向图存在差异等原因,导致干涉相位偏差沿距离向变化,而传统的干涉定标方法将干涉相位偏差视为常数进行定标,无法消除干涉相位沿距离向变化的误差,因此使得定标后反演得到的高程存在距离向空变误差。针对该问题,该文提出一种单独将干涉相位偏差沿视角进行多项式拟合的定标方法。最后,利用一组机载实测数据对该方法加以验证,实验结果表明,该方法能有效地解决高分辨率机载InSAR高程测量距离向误差的空变问题。     

利用自动识别系统信息进行高频地波雷达天线阵校正

该文提出了一种利用自动识别系统(AIS)信息进行高频地波雷达天线阵校正的方法。该方法使用高信噪比的舰船目标回波信号和目标的AIS信息解算天线阵的相位误差和增益误差。该方法的校正精度高于使用非合作目标回波的盲校正算法,同时无需部署专用信标机,并可以实现随时校正。使用高频地波雷达实测数据以及相应的AIS数据对新方法的性能进行了检验,其结果证明了新方法的优势。     

High Altitude Platform Station (HAPS): A Review of New Infrastructure Development for Future Wireless Communications

This paper looks into the relatively new field of high altitude platform stations. HAPS is seen as a ‘middle ground’ between the terrestrial and satellite cases, and aims to exploit of the advantages of both types of system. Since HAPS is such a new field, this paper focuses on the technology behind a HAPS communications system, how this has developed, and compares it to the terrestrial and satellite equivalents. One important area that is being investigated is the applications for which HAPS should be used. This is a critical issue if a significant business case is to be made for HAPS. Worldwide HAPS projects and research issues are also highlighted. Finally, the review concludes with the remarks on the future of HAPS for wireless communications systems.     

高压变频装置在CSPC03系统的应用

本文结合CSP生产的实际情况,介绍了北京动力源科技股份有限公司研制生产高压变频器在CSPC03泵组的应用,使邯钢热力厂取得了显著的经济效益。     

基于线性动态模型的雷达高分辨距离像小样本目标识别方法

为了解决雷达高分辨距离像识别系统对训练样本需求量过大的问题,该文提出一种基于线性动态模型的小样本目标识别方法。首先分析了距离像频谱的统计特性,然后从其广义平稳性出发,使用线性动态模型对距离像频谱幅度建模,并用期望最大化算法估计模型参数。实测数据的实验结果表明：即使在很少的训练样本条件下,该方法仍能获得较高的正确识别率和良好的拒判性能。