燃煤锅炉供热系统的模糊控制

介绍燃煤锅炉供热系统的自动化节能模糊控制方案,燃煤锅炉供热系统是一个大惯性的滞后系统,传统的单纯PID控制效果不理想,而基于工人熟练的经验和专家知识的模糊控制能够达到比较好的效果。系统中对控制参考量水温和炉膛负压这两个输入量模糊化处理,由控制规则推出输出模糊子集,再应用模糊推理合成规则得出PID的系数,PID控制器根据输出量来控制鼓风机、引风机、炉排电机和水泵的变频器。     

基于等效陀螺的捷联惯导快速两位置对准仿真

研究优化惯导系统的可观性能,提高捷联惯导两位置对准的速度,有助于提高导航的准确性和快速性,将水平速度误差和等效陀螺误差作为系统观测量,提出采用静基座下快速两位置对准的新方法.在常规对准方法的基础上,建立了引入陀螺信息的观测方程,用奇异值分解方法分析了新系统可观测性,推出了第一位置可观测量的最优估计及估计误差.根据状态快速收敛的特性,提出采用PCWS方法,对加速度计和陀螺进行了有效的标定,并进行了仿真,结果证明方法有效提高加快了两位置对准的速度,能充分利用陀螺信息,有效提高了惯导系统的可观测性,缩短对准时间,具有重要的参考价值.     

Thermal expansion of molybdenum in the range 1500–2800 K by a transient interferometric technique

The linear thermal expansion of molybdenum has been measured in the temperature range 1500–2800 K by means of a transient (subsecond) interferometric technique. The molybdenum selected for these measurements was the Standard Reference Material SRM 781 (a high-temperature enthalpy and heat capacity standard). The results are expressed by the relation where T is in K and l ₀ is the specimen length at 20°C. The maximum error in the reported values of thermal expansion is estimated to be about 1% at 2000 K and not more than 2% at 2800 K.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

基于l1范数相干度的量子态区分

为探究区分量子态的最优策略,以相干作为资源,利用附加辅助系统的方法来区分非正交量子态,并给出了l₁范数相干度与区分量子态的成功概率之间的数值关系,同时量化了某些特定情况下不出错的量子态区分(UQSD)的最优协议所需的l₁范数相干均值.本文的研究结果表明,通过调整生成的相干度可以提高区分量子态的成功几率.     

Pathways to eliminate carbon emissions via renewable energy investments at higher education institutions

Higher education institutions are among the many public and private sector entities that have committed to long-term sustainability goals in response to the threat of climate change. A key challenge for these institutions is establishing a commitment to make targeted investments in renewable energy technologies in support of emissions reduction goals. Such strategies require a vision to simultaneously coordinate strategic investments in renewable energy technologies with tactical operational decisions to achieve the desired benefits. In this paper, we formulate and solve a least-cost renewable energy capacity investment planning model to determine pathways to achieve emissions reduction strategies. Specifically, we apply our model to Rutgers University to evaluate its target of 100 % carbon neutrality. Using these insights, we share recommendations on how these strategies can be executed. This research serves as a springboard for administrators to assess and deploy their emissions reduction strategies, while ensuring system and financial constraints are satisfied.     

汽车稳定杆组织与疲劳性能研究

对28Mn6钢制造的汽车稳定杆，分别采用整体感应加热-整体淬火、连续感应加热淬火两种不同工艺热处理，并进行了台架疲劳寿命试验。采用光镜分析了不同稳定杆的金相组织，用扫描电镜分析了早期疲劳断裂的稳定杆断口形貌。结果表明，获得细小的高韧性索氏体组织是保证良好疲劳寿命的关键，稳定杆喷丸表面质量、游离铁素体也是影响疲劳性能的重要因素。     

基于时间序列模式表示的异常检测算法*

提出了一种基于时间序列的模式表示提取时间序列异常值的异常检测算法(PREOV).时间序列的模式表示本身就具有压缩数据、保持时间序列基本形态的功能,并且具有一定的除噪能力.在时间序列模式表示的基础上提取异常值,可以大大提高算法的效率和准确性,达到事半功倍的效果.在本算法中,还使用了一定的剪枝策略,使得算法的时间复杂度进一步降低.该算法计算简单、实现方便、无须训练,可以支持时间序列的动态增长.     

冠脉造影图像血管增强及减影的优化方法

针对于传统X射线冠状动脉造影序列图像的血管的减影包含严重伪影以及减影结果不完整等问题,提出了冠脉造影图像血管增强以及减影优化的方法。基于冠脉造影序列图像的时空特性,将相同时相的图像匹配进行减影,得到初步减影结果。针对初步减影部分缺失,对有导管遮挡没有被识别的单根血管进行二次增强处理。增强方法为:运用区域生长确定被导管遮挡的血管部分,以此部分为基础按规定模板扩展,形成覆盖导管区域,区分血管和导管,改变两部分的灰度值,增大对比度。最后采用灰度线性变换、中值滤波等步骤,得到优化的冠脉血管减影。实验表明,本减影及优化方法可以从冠脉造影序列图中提取较为完整清晰的冠脉血管并且具有很好的可控性和鲁棒性。     

Mobile learning in chemical engineering: An outlook based on case studies

In the context of the electronic learning (E-learning) methodology, mobile learning (M-learning) focuses on the use of portable technology (such as mobiles or tablets) and the mobility of students. E-learning, and particularly M-learning, can be implemented in combination with other pedagogical methodologies for chemical engineering teaching and learning. We can consider that the vast majority of undergraduates own personal mobile devices nowadays. Moreover, many case studies have shown that M-learning is an effective methodology to capture students’ attention and to actively engage them in the learning process. In most cases, lecturers have reported an improvement in both academic performance and qualifications and have expressed a favourable opinion towards this type of initiative in surveys. In line with the increasing interest in the incorporation of E-learning, this review discusses cases studies based on M-learning within the field of chemical engineering teaching through different technological platforms and apps which can be installed or directly used on mobile devices. All the platforms described in this work offer a free version, emphasizing the possibility of extending this methodology within the university with no need for additional economic resources.     

LF软吹时间对硅脱氧弹簧钢氧化物夹杂控制影响

 对于一些采用硅锰脱氧冶炼工艺的特殊钢,为保证钢水洁净度,常会选择较长时间的LF软吹处理,导致过程能耗增加。通过工业试验,借助FEI Explorer 4自动扫描电镜检测,研究不同LF精炼软吹时间对硅脱氧弹簧钢55SiCr铸坯氧化物夹杂成分、数量的影响;并采用夹杂物极值统计法,对比评价不同LF精炼软吹时间对应成品盘条横截面最大夹杂物尺寸控制情况。结果表明,在LF软吹10 min与软吹40 min 两种工艺条件下,铸坯中尺寸大于5 μm的氧化物夹杂成分接近,均在CaO-SiO₂-Al₂O₃相图中假硅灰石、钙长石和钙铝黄长石共晶低熔点区,其中软吹10 min工艺铸坯氧化物夹杂组成落入低熔点区的数量所占比例更大。LF软吹10 min与软吹40 min铸坯中尺寸大于5 μm的氧化物夹杂数量密度分别为11.70个/100 mm2和14.59个/100 mm2,尺寸大于15 μm 的氧化物夹杂数量密度分别为0.53个/100 mm2和1.65个/100 mm2,LF软吹10 min工艺铸坯大尺寸氧化物夹杂数量密度略低于LF软吹40 min工艺。当预测面积为30 000 mm2时,两种LF软吹时间对应成品盘条横截面最大夹杂物尺寸分别为27.1 μm和28.1 μm,盘条最大夹杂物尺寸控制无显著差别。结合硅锰脱氧钢中大尺寸低熔点CaO-SiO₂-Al₂O₃系夹杂物主要源自钢包渣乳化卷入,具有与钢水和氩气泡界面接触角很小、难以通过吹氩上浮去除的特点,建议硅锰脱氧钢LF软吹过程按短时间快节奏进行控制。