复合土工膜与防渗墙连接的大型剪切试验研究

围堰工程中常用复合土工膜连接防渗墙作为防渗体系,其连接部位的土工膜常会出现结构性破坏而造成集中渗漏现象。依据高土石围堰防渗体系中复合土工膜的受力特点,利用自主研制的低摩阻叠环式双向静动剪切试验机,考虑土工膜无伸缩节、普通竖向伸缩节和U型槽伸缩节3种连接型式,构建复合土工膜与防渗墙接头的结构模型,开展复合土工膜与防渗墙连接的大型剪切试验,研究不同连接型式下复合土工膜的受力变形机理。结果表明:①无伸缩节、普通竖向伸缩节和U型槽伸缩节3种连接型式下,复合土工膜的应变均随着剪切位移的增大逐渐增大,随着距防渗墙距离的增大逐渐减小;②3种连接型式下模型土体的应力-应变关系变化趋势基本一致,峰值应力变化不大;③无伸缩节连接时,靠近防渗墙位置土工膜的峰值应变为4×10^-3,普通竖向伸缩节连接时,相同位置处土工膜的峰值应变为3.5×10^-3,设置U型槽伸缩节后峰值应变为6.51×10^-4,与前2种连接型式相比,U型槽伸缩节较大程度地降低了土工膜的峰值应变,可以有效解决复合土工膜在防渗墙接头处的应变集中问题。研究成果可为高土石围堰工程防渗体系的设计和施工提供依据。     

Protection switching schemes and mapping strategies for fail-operational hard real-time NoCs

Communication infrastructures designed for mixed-critical MPSoCs must provide isolation of traffic, hard real-time guarantees, and fault-tolerance. In previous work, we proposed the combination of protection-switching with a hybrid Time-Division-Multiplexed (TDM) and packet-switched Network-on-Chip (NoC) to achieve all three goals. In this paper, we present an FPGA implementation of such a NoC with all its features. We give synthesis results for the hybrid NoC, including the network interface, and show that our router uses over 32% fewer LUTs and registers than a competitive state-of-the-art router for mixed-critical MPSoC. We then explore different channel and task mapping strategies for critical applications which use protection switching and evaluate the effect these mappings have on the best-effort (BE) traffic in the system. Results show, that spreading out the critical traffic rather than naively dividing the system in critical and non-critical application domains is advantageous or even necessary in many cases and can allow for up to 13% more BE traffic. We give a comprehensive trade-off analysis of three protection switching schemes—1:n, 1:1, and 1+1—and show that 1+1 protection has less than half the worst case latency for critical traffic that 1:n and 1:1 protection have. At the same time, 1+1 protection, on average, only causes a 1.18% earlier saturation rate for BE traffic, which we consider to be affordable. We conclude that 1+1 protection is ideally suited for use in mixed-critical systems with high safety requirements.     

Transformation of semantic knowledge into simulation-based decision support

Simulation is capable to cope with the uncertain and dynamic nature of industrial value chains. However, in-depth system expertise is inevitable for mapping objects and constraints from the real world to a virtual model. This knowledge-intensity leads to long development times of respective projects, which contradicts the need for timely decision support. Since more and more companies use industrial knowledge graphs and ontologies to foster their knowledge management, this paper proposes a framework on how to efficiently derive a simulation model from such semantic knowledge bases. As part of the approach, a novel Simulation Ontology provides a standardized meta-model for hybrid simulations. Its instantiation enables the user to come up with a fully parameterized formal simulation model. Newly developed Mapping Rules facilitate this process by providing guidance on how to turn knowledge from existing ontologies, which describe the system to be simulated, into instances of the Simulation Ontology. The framework is completed by a parsing procedure for an automated transformation of this conceptual model into an executable one. This novel modeling approach makes model development more efficient by reducing its complexity. It is validated in a use case implementation from semiconductor manufacturing, where cross-domain knowledge was required in order to model and simulate the impacts of the COVID-19 pandemic on a global supply chain network.     

Hybrid function projective synchronization of chaotic systems with uncertain time-varying parameters via Fourier series expansion

In this paper, the hybrid function projective synchronization (HFPS) of different chaotic systems with uncertain periodically time-varying parameters is carried out by Fourier series expansion and adaptive bounding technique. Fourier series expansion is used to deal with uncertain periodically time-varying parameters. Adaptive bounding technique is used to compensate the bound of truncation errors. Using the Lyapunov stability theory, an adaptive control law and six parameter updating laws are constructed to make the states of two different chaotic systems asymptotically synchronized. The control strategy does not need to know the parameters thoroughly if the time-varying parameters are periodical functions. Finally, in order to verify the effectiveness of the proposed scheme, the HFPS between Lorenz system and Chen system is completed successfully by using this scheme.     

基于群智能混合算法的物流配送路径研究

针对物流车辆路径优化问题,考虑到基本蚁群算法有收敛速度慢、易陷入局部最优的缺点,采用了一种双种群蚁群算法,在蚁群的基础上引入差分进化(DE)和粒子群算法(PSO)。通过在PSOAS种群和DEAS种群之间建立一种信息交流机制,使信息能够在两个种群中传递,以免某一方因错误的信息判断而陷入局部最优点。通过matlab仿真实验测试,表明该群智能混合算法可以较好地解决TSP的问题。     

用局部法评定焊接接头的疲劳性能

采用16Mn钢非承载十字焊接接头疲劳试验结果对使用Dang Van准则的疲劳评定局部方法进行了研究。结果表明，有限元分析中应力集中区单元尺寸对局部参量计算有明显影响，为获得比较合理的预测结果需对焊趾应力集中区所划分的单元尺寸限定，当接头焊趾半径在0．15-0．8mm变化时应选择最小单元尺寸0．32-0．62mm计算局部参量；在此基础上Dang Van准则可以对焊态接头做出合理的评定，但Dang Van建议的卢值偏安全。此外，通过计算发现焊趾半径只影响局部很小区域(约0．5mm内)的应力集中分布，在某一深度(约0．5mm)后存在稳定的应力集中，因而建议采用距应力集中区最大应力处某一深度的应力参数计算Dang Van局部参量可能更为合理，这将减小局部参数对焊趾半径及单元尺寸的依赖性。     

基于离散单元法的锥形双螺杆输送及混合机理分析

锥形双螺杆挤出机结构模型与其他普通螺杆挤出机相差很大且构成独特,近年来在聚合物加工行业中发挥了很大的作用。设计螺槽深度与螺杆半径比为1∶2、2∶5、1∶3的三种锥形双螺杆挤出机,通过离散单元法模拟了锥形双螺杆挤出机挤出LDPE、HDPE两种颗粒的过程,分析了锥形双螺杆挤出机螺槽内颗粒速度的变化,同时在不同参数下对三种锥形双螺杆挤出机的输送效率进行了比较。利用EDEM软件对LDPE和HDPE颗粒进行离散元分析,得出不同时刻两种颗粒在三种锥形双螺杆挤出机内的混合情况。结果表明,螺槽深度与螺杆半径比为1∶2的锥形双螺杆挤出机的混合效率优于螺槽深度与螺杆半径比为2∶5、1∶3的锥形双螺杆挤出机。     

机床圆柱结合部的动态特性解析方法

在机床图纸设计阶段，预测机床整机的动态特性具有十分重要的意义，进行机床整机动态特性预测的难点在于如何确定结合部的刚度和阻尼参数，本文以机床结构中应用较普遍的圆柱结合部为例，研究了基于结合面基础特性参数的圆柱结合部动态特性解析方法，并编制相应解析软件，给出应用实例，证明本文的方法及软件是正确的。     

镁合金焊接接头的力学性能

随着镬合金应用的日益广泛，其焊接接头的力学性能也受到人们的重视。介绍和分析了采用不同焊接方法时焊接接头的力学性能。并提出一些看法，对镬合金焊接接头力学性能的研究有一定促进作用。     

Evaluation of a palladinized Nafion™ for direct methanol fuel cell application

Palladinized Nafion™ was prepared via ion-exchange and chemical reduction method. Palladium precursors and solvent systems determined the efficiency of the incorporation and distribution of nanoparticles. The tortuous thin Pd film was formed on the surface of membrane when Na⁺-Nafion™ and water were used. Pd nanoparticles enhanced the water uptake of Nafion™ and reduced its methanol uptake. And dispersed Pd nanoparticles in Nafion™ disturbed the proton conduction and methanol permeation simultaneously in Nafion™ cluster. In order to reduce methanol permeation of Nafion™ and keep its high conductivity, it was more efficient for Pd nanoparticles to distribute near the surface of membrane. Palladinized Nafion™ improved the performance of DMFC single cell operation by reducing the methanol permeation.