月桂氮草酮研究进展

介绍了月桂氮草酮作为高效皮肤促渗剂的发展概况、合成工艺、研究进展及其应用前景。     

OXYGEN TRANSFER IN HORIZONTAL PIPELINE AERATORS WITH NOZZLES

Horizontal pipeline and tubular loop aerators are of interest for fermentation and waste water treatment and are ideally suited for continuous processing. A major drawback is that these pipeline contactors invariably operate in the “elongated bubble and plug” regime in which the mass transfer rate is low. This article evaluates the performance of a horizontal pipeline aerator fitted with nozzles equispaced along its length to enhance mass transfer rates by promoting turbulence and augmenting effective interfacial area. Such devices can also be advantageously used in long pipe lines as in the case of treating waste while it is being transported. Pressure drop and overall liquid-side mass transfer coefficient data are reported as functions of liquid (water) and gas flow rates and nozzle size and spacing. It is shown that for all the conditions studied, k_La = 0.026(ΔP/L)^1.036 and that the pressure gradient is given by a simple correlation, provided an empirical parameter which characterises a nozzle is known. Preliminary investigations on the effect of surfactant ad the presence of suspended solids (size 75 μm) on mass transfer coefficient are also reported. Very high values of power dissipation can be achieved in such aerators without mechanically moving parts and high values of mass transfer coefficient can be realized.     

MATHEMATICAL MODELING OF THROUGH-HOLE-PLATING IN ELECTROCHEMICAL MICROFABRICATION II. AXISYMMETRIC TWO-DIMENSIONAL CONVECTIVE MASS TRANSFER

Axisymmetrical, two dimensional mass transfer in a tube and a through-hole was studied. The elliptic convective-diffusion equation was solved numerically by taking into account both the axial and radial diffusion in the entrance region of an infinite tube. The whole mass-transfer region in a tube of finite length was also studied by dividing the domain into several regions according to different mass-transfer mechanisms. A similar analysis is then conducted for a through-hole geometry by assuming a modified Hagen-Poiseuille fluid pattern. Results show that mass-transfer rate in a through-hole is larger than that in a tube by approximately 10%. This is due primarily to faster fluid flow within the concentration boundary layer in a through-hole.     

Some novel polymer-supported optically active phase transfer catalysts: 2. Use in displacement,reduction, epoxidation and addition reactions

The performance of 27 novel polymer-supported chiral phase transfer catalysts in a range of phase separated reactions has been studied. The later include a number of displacement reactions, sodium borohydride reductions of prochiral ketones, the epoxidation of chalcone, the addition of nitromethane to chalcone and the addition of thiophenol to cyclohexenone. Some of the reactions were performed under liquid/liquid conditions and others using solid/liquid. No systematic difference emerged between these. In general many of the catalysts provided fast reactions and good chemical yields of products. However, in no case was any significant enantiomeric excess achieved. The latter observation is discussed in the light of the reported behaviour of analogous non-supported catalytic systems, and suggestions proposed to explain these differences.     

光学镜头调制传递函数的测试

为了定量、客观、全面地评价光学镜头的像质,介绍了光学镜头调制传递函数的测试。先简要叙述了测试的原理,并给出计算公式;然后介绍了测试步骤,其中包括固定、穿轴、测试中心视场和测试轴外视场;最后介绍了测试时的注意事项,包括对测试工装的要求、对测试平面的要求和正、负轴外视场测试值相差较大时的处理办法。     

A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds

A three-dimensional model is proposed for both furnace-side and wall-side heat transfer in circulating fluidized beds with membrane walls. Following previous publications (Int. J. Heat Mass Transfer (2003a, b)), a core-annulus flow structure is employed in the model, with consideration of the membrane wall influence on bed hydrodynamics. The model couples radiation, conduction and convection on the furnace side to conduction and convection on the wall side. Radiation in the wall layer is simulated by the moment method. A finite-element method is employed to solve the set of non-linear, partial differential equations. The solution is demonstrated for a typical example. The model gives predictions of suspension-to-wall heat transfer which show satisfactory agreement with published experimental data.     

Ozone-Based Advanced Oxidation Processes for the Decomposition of N-Methyl-2-Pyrolidone in Aqueous Medium

The present study investigates the decomposition of N-Methyl-2-Pyrolidone (NMP) using conventional ozonation (O₃), ozonation in the presence of UV light (UV/O₃), hydrogen peroxide (O₃/H₂O₂), and UV/H₂O₂ processes under various experimental conditions. The influence of solution pH, ozone gas flow dosage, and H₂O₂ dosage on the degradation of NMP was studied. All ozone-based advanced oxidation processes (AOPs) were efficient in alkaline medium, whereas the UV/H₂O₂ process was efficient in acidic medium. Increasing ozone gas flow dosage would accelerate the degradation of NMP up to certain level beyond which no positive effect was observed in ozonation as well as UV light enhanced ozonation processes. Hydrogen peroxide dosage strongly influenced the degradation of NMP and a hydrogen peroxide dosage of 0.75 g/L and 0.5 g/L was found to be the optimum dosage in UV/H₂O₂ and O₃/H₂O₂ processes, respectively. The UV/O₃ process was most efficient in TOC removal. Overall it can be concluded that ozonation and ozone-based AOPs are promising processes for an efficient removal of NMP in wastewater.     

Errors associated with swelling in the analysis of polymer-solvent diffusion measurements

Sorption curves are generated from a mathematical model which includes the influence of the polymer swelling for unsteady-state sorption of a vapor or liquid by a polymer. To investigate the simultaneous effects of the specific volumes of the polymer-penetrant pair and the difference between the final and initial equilibrium concentrations on the sorption curves, statistical experimental design approach is used. Simulation results obtained from the numerical solution of model equations are utilized to estimate the error that would occur if one simply evaluates the diffusion coefficient using the traditional formulas derived from the analytical solution of the sorption equation. An empirical expression is developed that describes the effects of the difference between the final and initial equilibrium concentrations and the specific volumes of the polymer and the penetrant on the magnitude of error in diffusivity associated with the use of one of these traditional formulas so called the initial slope method. The predictive ability of the regression model is tested by performing additional simulations not used in the regression analysis.     

GRAPHICAL SOLUTION OF MULTISTAGE FLUIDIZED BED HEAT EXCHANGER

The design of multistage fluidized beds for heat exchange necessitates the solution of the mass and energy balance equations combined with the equilibrium relations for each stage. This paper presents a novel way of applying well known methodology to a different technology, one where it has not been widely applied.

In the present work a McCabe-Thiele type of graphical approach is presented for both counter-current and cross-current contacting multiple fluidized beds. The necessary equations for a multistage calciner are developed and the application of the proposed method is demonstrated. Generalized fluidized bed efficiency for counter-current and cross-current multiple fluidized bed is presented.