基于XC2287M的工程机械ECU设计

ECU是工程机械电控系统的核心部件,目前国内中高端ECU市场基本被国外厂商所垄断。设计了一款基于XC2287M微控制器的工程机械智能ECU,采用CODESYS软PLC作为编程平台,支持IEC 61131-3定义的5种标准PLC语言进行编程。所设计的ECU拥有丰富的I/O资源和完善的安全保护机制,能够广泛应用于各种工程机械控制系统,打破国外厂商对ECU市场的垄断。     

4-(α-吡啶甲酰基)-PMP的合成与谱学特性研究

合成了新吡唑啉酮类试剂1-苯基-3-甲基-4-(α-吡啶甲酰基)-吡唑啉-5-酮(简称4-(α-吡啶甲酰基)-PMP,下同)。在表征分子结构的同时,对其红外、紫外吸收光谱,核磁共振氢谱、碳谱,质谱等谱学特性和质谱裂解规律进行了分析与研究。     

End-capped polystyrene with 8-hydroxyquinoline group by ATRP method

8-Hydroxyqunioline end-capped polystyrene was prepared through atom transfer free radical polymerization (ATRP) with 8-(5-chloromethyl) quinolyl acetate as initiator. The results indicated that this polymerization is a first order reaction with respect to monomer conversion. The molecular weight increased linearly with monomer consumption and very narrow distribution of molecular weight was obtained (polydispersity index less than 1.2). The FT-IR and NMR results show that the 8-hydroxyquinloine group was chemically bonded to the polymer end and there is nearly one 8-hydroxyquinoline group in per polymer chain. All those data show that polymerization of styrene at such conditions displayed living characters. The polymer with 8-hydroxyqquinoline end group reacted with triethylaluminum to form polymeric light-emitting complex and single layer LED was prepared by common spin-coating method. The peak wavelength of LED based on synthesized polymeric complex was around 570 nm.     

The Roles of 3- and 4-Isopropylbiphenyls in the Isopropylation of Biphenyl over a H-Mordenite

The isopropylation of mixtures of 3- and 4-isopropylbiphenyls (3- and 4-IPBPs) was examined over a dealuminated H-mordenite (HM) to elucidate the role of 3- and 4-IPBPs in the isopropylation of biphenyl (BP). 4-IPBP was consumed much faster than 3-IPBP in all cases. 4-IPBP was an exclusive precursor to diisopropylbiphenyls (DIPBs), particularly 4,4-DIPB, and 4,4-DIPB was found in encapsulated products during the reaction. These results show that 4-IPBP can allow establishment of an active complex with propylene and acid site in HM pores, whereas 3-IPBP cannot. It is concluded that the isopropylation of BP over HM occurs through a reactant selectivity mechanism, and through a restricted transition state mechanism, but not through a product selectivity mechanism.     

聚氨酯改性聚异氰脲酸酯弹性体的合成和热性能分析

本文介绍用２，４，６－三（二甲胺基甲基）苯酚（ＤＭＰ－３０）作催化剂，采用一步法工艺制备聚氨酯改性聚异氰脲酸酯弹性体的研究工作，并用红外光谱、差热分析、热失重等方法对所制弹性体进行了定性、定量热性能分析。结果表明，通过调节催化剂用量、两组分摩尔比等工艺条件，可以使整个反应过程在１分钟之内完成，适合ＲＩＭ加工工艺；由红外光谱法和差热分析可定性确知所制材料中含有聚异氰脲酸酯三聚体和氨酯，由热失重分析可     

硫酸根/氧化钛—氧化镧催化合成苯甲醛1,2—丙二醇缩醛

以稀土改性固体超强酸SO_4~(2-)/TiO_2—La_2O_3为催化剂,通过苯甲醛和1,2—丙二醇反应合成了苯甲醛1,2—丙二醇缩醛,探讨了SO_4~(2-)/TiO_2—La_2O_3对缩醛反应的催化活性,研究了醛醇物质的量比、催化剂用量、反应时间等对产品收率的影响。实验表明,SO_4~(2-)/TiO_2—La_2O_3是合成苯甲醛1,2—丙二醇缩醛的良好催化剂,在n(醇):n(醛)=2.25:1,催化剂用量为反应物料总质量的0.50％,环己烷为带水剂,反应时间50min的优化条件下,苯甲醛1,2—丙二醇缩醛的收率可达80.8％。     

纳米二氧化硅的生产及应用现状

介绍了纳米SiO2的生产原理、结构和特性，并对2种生产原理做了比较；综述了目前纳米SiO2在建筑业、化工、医药、特种材料、航天航空业的特种制品、农作物种子处理等方面的应用现状。     

高柔韧性聚氨酯丙烯酸酯的合成及应用

选用不同结构的多元醇作骨架，合成一系列高性能的聚氨酯丙烯酸树脂，并通过对聚氨酯丙烯酸树脂性能的对比研究，发现以聚丁二烯二元醇为骨架的聚氨酯丙烯酸酯树脂具有极佳的柔韧性和优异的低温耐曲折性。     

异佛尔酮二异氰酸酯三聚体的合成

合成了3－异氰酸酯基亚甲基－3，3，5－三甲基环己基二异氰酸酯（IPDI）三聚体，对合成中催化剂，反应温度、反应时间等进行了探讨，并用红外光谱进行了表征。结果表明，采用醋酸钾化催化剂，在50－90℃下反应，再经脱催化剂处理，可制得IPDI三聚体。     

固体酸催化剂作用下氯苯硝化的区域选择性研究

制备了SO^2-4/ZrO2催化剂并研究了该催化剂作用下硝酸硝化氯苯的区域选择性，反应具有强对位选择性硝化能力，催化剂经500℃焙烧后，在反应温度为30℃和反应30min时，氯苯一硝化产物中邻／对硝基氯苯异构体的质量比达0．23，产物得率可达55．5％，催化剂重复使用4次，其催化活性减少不大。