基于蝴蝶优化的配电线路双层迭代降损方法研究

为解决10 kV长配电线路损耗大、电压质量差及降损设备年投资回报率低等问题,提出一种结合蝴蝶优化的配电线路双层迭代降损增效方法。首先,考虑线路负荷三相不平衡,应用电力系统仿真软件OpenDSS建立目标配电线路分相潮流仿真模型。其次,增加10 kV线路无功补偿装置容量与位置以及调压器分接头挡位与位置为控制变量,建立以考虑全寿命周期成本(life cycle cost, LCC)的年投资回报率最大为目标的外层规划模型,以年有功损耗及年平均电压偏移量最小的多目标为内层运行模型。然后,利用蝴蝶算法通过Python调用OpenDSS潮流计算模型仿真,得到潮流结果和理论线损并求解降损模型。最后,以某供电公司线路为算例进行验证,结果表明该方法能为线路降损提供实用的实施方案。     

基于改进算法的10kV配电网合环稳态电流计算

为了保证合环操作的顺利进行,提出了一种10 kV配电网的合环电流计算方法,重点对合环冲击电流计算过程进行改进,将最大电流出现时刻和所在相纳入考虑。首先,通过理论分析推导,介绍了所提的10 kV配电网合环前稳态电流和合环冲击电流的计算方法;然后,给出了合环操作判定条件的流程;最后,基于MATLAB/Simulink搭建了10 kV配电网的合环仿真模型,对理论分析进行了仿真验证。仿真结果表明,提出的计算方法具有较高的准确性,对实际工程中合环电流计算和合环操作判定具有一定的指导意义。     

高压带电作业双臂机器人系统设计

摘要：传统带电作业采用人工方式,但高空、高压危险作业环境与高劳动强度对作业人员人身安全构成一定威胁。针对10KV配电网带电作业的实际需求,采用12米高液压升降平台和两台协作型六轴机械臂,设计开发了双臂六轴机器人系统。采用ARM嵌入式处理器,设计开发了双臂机器人控制器硬件和软件,根据实际作业应用需求,给出了机械臂运动路径规划方法,通过WiFi无线通讯方式和SOCKET编程实现了对双臂机器人的现场操作控制,采用LoRa无线通讯网络,设计开发了LoRa主站模块和LoRa专用工具模块,采用LoRa定点扫描通讯方式,实现了各工具模块和机器人控制器的相互通讯。在某培训实验基地10KV配电线路上,对带电作业机器人系统进行了现场实验,验证了剥皮、接引流线等各项设计功能,机器人从接收到剥皮指令开始到剥皮作业完成,整个过程用时3分20秒;完成接引流线作业全程用时2分50秒。     

PM10 remote sensing from geostationary SEVIRI and polar-orbiting MODIS sensors over the complex terrain of the European Alpine region

The subject of this study is to investigate the capability of spaceborne remote sensing data to predict ground concentrations of PM₁₀ over the European Alpine region using satellite derived Aerosol Optical Depth (AOD) from the geostationary Spinning Enhanced Visible and InfraRed Imager (SEVIRI) and the polar-orbiting MODerate resolution Imaging Spectroradiometer (MODIS). The spatial and temporal resolutions of these aerosol products (10 km and 2 measurements per day for MODIS, ∼ 25 km and observation intervals of 15 min for SEVIRI) permit an evaluation of PM estimation from space at different spatial and temporal scales. Different empirical linear relationships between coincident AOD and PM₁₀ observations are evaluated at 13 ground-based PM measurement sites, with the assumption that aerosols are vertically homogeneously distributed below the planetary Boundary Layer Height (BLH). The BLH and Relative Humidity (RH) variability are assessed, as well as their impact on the parameterization. The BLH has a strong influence on the correlation of daily and hourly time series, whilst RH effects are less clear and smaller in magnitude. Despite its lower spatial resolution and AOD accuracy, SEVIRI shows higher correlations than MODIS (r_SEV∼ 0.7, r_MOD∼ 0.6) with regard to daily averaged PM₁₀. Advantages from MODIS arise only at hourly time scales in mountainous locations but lower correlations were found for both sensors at this time scale (r∼ 0.45). Moreover, the fraction of days in 2008 with at least one satellite observation was 27% for SEVIRI and 17% for MODIS. These results suggest that the frequency of observations plays an important role in PM monitoring, while higher spatial resolution does not generally improve the PM estimation. Ground-based Sun Photometer (SP) measurements are used to validate the satellite-based AOD in the study region and to discuss the impact of aerosols' micro-physical properties in the empirical models. A lower error limit of 30 to 60% in the PM₁₀ assessment from space is estimated in the study area as a result of AOD uncertainties, variability of aerosols properties and the heterogeneity of ground measurement sites. It is concluded that SEVIRI has a similar capacity to map PM as sensors on board polar-orbiting platforms, with the advantage of a higher number of observations. However, the accuracy represents a serious limitation to the applicability of satellites for ground PM mapping, especially in mountainous areas.     

仿真软件在高频电路实验教学中的应用

Multisim10是原理电路设计、电路功能测试的仿真软件.该文利用Multisim10对高频电路中的功率放大器和正弦波振荡器进行了分析,其结果符合理论推导.将Multisim10引入到高频实验教学中,不但能提高学生的学习兴趣,帮助学生更好理解原理电路以及相关特性的测试方法,而且还能提高学生的电路设计能力.     

基于DDS的低通滤波器设计与仿真

分析了几种经典滤波器特性,重点研究了DDS系统中低通滤波器的设计方法。根据DDS的结构特点和输出杂散频谱特性,结合滤波器技术指标使用了归一化法完成了一个九阶椭圆函数低通滤波器的设计,使其通带截至频率为120MHz、通带内最大衰减为0.2dB、在135MHz处阻带内最小衰减为66dB。通过Multisim10对其进行仿真后可以得出,使用此种方法设计的低通滤波器过渡带陡峭、幅频特性仿真良好,并且能够很好地满足预期的技术指标。     

Finding an Euclidean anti--centrum location of a set of points

An obnoxious facility is to be located inside a polygonal region of the plane, maximizing the sum of the k smallest weighted Euclidean distances to n given points, each protected by some polygonal forbidden region. For the unweighted case and k fixed an O(n²logn) time algorithm is presented. For the weighted case a thorough study of the relevant structure of the multiplicatively weighted order-k-Voronoi diagram leads to the design of an O(kn³+n³logn) time algorithm for finding an optimal solution to the anti-t-centrum problem for every t=1,…,k, simultaneously.     

On a new class of analytic functions associated with conic domain

The aim of this paper is to generalize the conic domain defined by Kanas and Wisniowska, and define the class of functions which map the open unit disk E onto this generalized conic domain. A brief comparison between these conic domains is the main motivation of this paper. A correction is made in selecting the range interval of order of conic domain.