类金刚石膜的制备及其影响因素

概述了近年来制类金刚石膜的新技术如双射频辉光放电（RF－RF）法，射频－直流辉光放电（RF－DC）法和微波－射频（MW－RF）法等，并且对影响类金刚石膜制备及性能的因素如基体材料，制备类金刚石膜时在膜中添加元素，类金刚石膜与基材之间的中间层等进行了较全面的分析。     

表面技术用新型加热与干燥设备

夜面涂装加热与干燥设备是近年来开发的节电新技术,可较传统热风炉或一般远红外炉节电15～40%,炉内上下温差3～8℃。文章提出用系统优化的原理和方法对乳白石英管低温辐射加热进行研究,设计中采用辐射密度分布法和部份功率控制法。     

我国化肥催化剂工业现状

全国48家化肥催化剂制造厂总能力为57Kt/a,产量近30kt/a,设备利用率不到50%。平均万吨氨耗催化剂10.36t,高于国外5.60t水平。现生产31个品种203个型号的催化剂中有103种经部级鉴定,但经常使用的约50种。目前化肥催化剂工业水平与国外相比还存在四方面差距。     

转盘反应器固定米根霉的L－乳酸发酵

研究了米根霉的固定化方法，研制了用吸附法固定米根霉的生物转盘反应器，考察了在该反应器中培养基组成及其它操作条件对Ｌ－乳酸发酵的影响。实验结果表明，应用吸附法固定化的米根霉及生物转盘反应器进行Ｌ－乳酸发酵具有发酵速率快，Ｌ－乳酸得率高及既能用于连续发酵又能用于间歇发酵等优点     

Reforming of methane with carbon dioxide over supported bimetallic catalysts containing Ni and noble metal: I. Characterization and activity of SiO2 supported Ni–Rh catalysts

Cobalt catalysts supported on silica aerogel have been prepared using sol–gel chemistry followed by drying under supercritical ethanol conditions. Three different loadings of cobalt were synthesized: 2, 6, and 10% by weight. Transmission electron micrographs indicate that the metallic cobalt exists as discrete particles 50–70 nm in diameter for the 2 and 6% loadings. The 10% catalyst shows long needles of cobalt. BET and BJH measurements indicate that the catalysts retain the silica aerogel properties of high surface area (∼800 m²/g), large pore volume (∼5 cm³/g), and an average pore diameter in the mesoporous regime (∼25 nm). The catalysts were evaluated for Fischer–Tropsch activity in a laboratory-scale packed bed reactor. All three catalysts were active with the 10% Co catalyst achieving more than 20% CO conversion which corresponds to a rate of 1.53 g CO per g-cat per hour. The catalysts were selective for the C₁₀₊ hydrocarbons with more than 50% of the carbon contained within this fraction. A significant portion of the C₉–C₁₅ hydrocarbon product was observed as 1-olefins which reflects the enhanced mass transport within the very porous aerogel support.     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

壳聚糖固定化酶和细胞研究新进展

分析评价了壳聚糖作为固定化酶和细胞载体的特性,概述了壳聚糖凝胶固定化酶和细胞的形态及制备方法,着重介绍了近年来壳聚糖固定化酶和细胞的改进方法,并指出今后壳聚糖固定化酶和细胞的发展方向。     

添加剂在固相法制备三氧化二铬中作用的研究

研究了在固相法制备三氧化二铬中多种添加剂对三氧化二铬性能，特别是六价铬残留量和表面性质的影响。     

不同老化方式对沥青低温性能的影响分析

研究了不同老化方式对沥青低温性能的影响,分3个阶段,对不同老化方式的试验结果进行了比较.阶段1研究表明,沥青在压力老化容器(PAV)中100℃条件下老化20 h后的低温性能与在1.01×105Pa、60℃条件下老化38 d后的低温性能相差无几.阶段2研究表明,可以通过58℃、10 r/s时的高温因子G*/sinδ来修正低温性能分级,从而可以利用短期老化来代替长期老化试验.阶段3研究表明,沥青的低温性能会随着老化时间改变而变化.当老化时间较短时,低温性能分级由劲度指标控制;当老化时间较长时,低温性能分级将转变为由蠕变速率控制.     

高效甲醛阻聚剂的研制

采用醋酸乙烯酯和乙醛为原料,合成了高效甲醛阻聚剂———聚乙烯醇缩乙醛。最佳的工艺条件为:反应物料配比(n醋酸乙烯酯∶n偶氮二异丁腈∶n40%乙醛)为40∶0.9∶20,聚合反应温度59℃,聚合反应时间9h。通过控制聚乙烯醇缩乙醛的粘均相对分子质量,达到在甲醛中溶解的目的。聚乙烯醇缩乙醛在低温下对甲醛溶液有较好的阻聚作用。