甲状腺素T4免疫传感器的研究

报道以甲基丙烯酸羟乙酯与甲基丙烯酸甲酯的共聚物为载体膜材料，研制成非酶标记的Ｔ４免疫传感器，并对载体膜材料的共聚方法及共聚物共聚比与传感器灵敏度的关系进行了探讨。     

云母粒径对云母／聚丙烯性能的影响

研究了云母填充改性聚丙烯(云母/PP)中云母粒径对其性能的影响。实验结果表明:云母粒径越小使得云母/聚丙烯材料强度提高越大、断裂伸长率增加,加工流动性变好;同时也促进和有利于聚丙烯结晶过程中的成核作用。     

聚烯烃塑料改性的研究进展

聚乙烯、聚丙烯以优良的力学性能、热性能、加工性能等成为最主要的聚烯烃塑料品种,大量用于生产薄膜、管材和板材。通过改性可获得高刚性、高强度、高耐热、低成本的聚烯烃塑料。综述了近年来聚乙烯和聚丙烯在接枝、交联、填充、共混等方面的改性进展,并指出了研究方向和发展趋势。     

Partial or total silylation of dextran with hexamethyldisilazane

The silylation reaction of dextran with 1,1,1,3,3,3-hexamethyldisilazane (HMDS) in DMSO was studied as the first step of the synthesis of new amphiphilic polyester-grafted dextrans. According to the experimental conditions, i.e. dextran molar weight, medium temperature and reaction time, HMDS/OH ratio, addition of a catalyst and co-solvent, partially or totally silylated dextrans were recovered. The highest silylation yields were obtained with the lowest molecular weight dextrans. The increase in temperature medium and/or reaction time, the presence of catalyst or co-solvent favored the protection yield. Whatever the dextran used, complete silylation of the polysaccharide chain could be achieved by adequate selection of the experimental conditions. The thermal properties of resulting silylated polysaccharides were investigated by temperature modulated DSC. It was observed that T_g values of partially silylated dextran were maintained between 120 and 140 °C, independently of the dextran molecular weight. Interestingly, DMSO proved to behave as an efficient plasticizer of (partially) silylated dextrans. The partially silylated dextrans were efficiently used as multifunctional macroinitiators for the controlled ring-opening polymerization (ROP) of lactone. The ROP was then promoted from the remaining hydroxyl groups in the presence of tin or aluminium activator. After polymerization and ultimate deprotection of the silylated dextran backbone, amphiphilic polyester-grafted dextrans were readily recovered.     

热处理工艺对冲击曲线的影响

通过ＳＡ５１５Ｇｒ．７０钢的不同温度正火和１３ＭｎＮｉＭｏＮｂＲ钢正火不同温度回火试样的示波冲击试验，研究了不同热处理工艺对冲击曲线的影响。     

彩电机壳结构CAD(Ⅺ)——冲击锤试验中机壳的动强度计算

本文采用能量法计算冲击锤试验中机壳的动强度,其计算为彩电微机系统CEDS中结构分析子系统的一部分。     

PVC／NBR／HDPE共混体系相容性研究（Ⅰ）增容剂对力学性能的影响

采用丁腈橡胶（ＮＢＲ）及其氢化还原后产物（ＨＮＢＲ）为ＰＶＣ／ＨＤＰＥ共混体系的增容剂，研究了增容剂结构、用量及丙烯腈含量对共混体系相容性的影响。发现丁腈橡胶（ＮＢＲ２９及ＨＮＢＲ２９）对ＰＶＣ／ＨＤＰＥ体系有较好的增容作用，而ＮＢＲ４０及ＨＮＢＲ４０较差。当增容剂用量为２％，ＰＥ含量为８％～１２％时，共混物具有较好的相容性，力学性能得到改善。     

有机纤维材料用软膜乳液阻燃剂的制备

采用甲醛、尿素、三聚氰胺、脒基脲磷酸盐为原料,以硼砂、硼酸、氨水为pH调节剂合成了保护胶;在保护胶存在下,以预乳化的丙烯酸酯混合单体于82-88℃共聚合成乳液,将其涂布于有机纤维材料,干燥后得软膜透明阻燃涂层。用其处理的涤棉布阻燃性能为:损毁长度68mm、续燃时间1s、阴燃时间3s、氧指数62、吸附干量287g/kg,处理的纸板的阻燃性能为:平均炭化长度77mm、平均续焰时间2s、平均续灼燃时间32s、吸附干量283g/kg。     

动态力学及介电法研究蓖麻油丙烯酸酯共聚网络悬挂链的弛豫运动

用动态力学（内耗）和介电方法研究了由蓖麻油（ｃａｓｔｏｒｏｉｌ）、甲苯二异氰酸酯（ＴＤＩ）、丙烯酸羟乙酯（ＨＥＭＡ）组成的网络（Ａｉ）和由正己醇取代Ａ网络中部分ＨＥＭＡ组成的网络Ｂｉ（ｉ＝０，１，２，３）两种网络的内耗及介电损耗，内耗峰强度随悬挂链数目增加而升高，证实了网络破坏后形成的悬挂链的运动对内耗及介电损耗峰高有明显的贡献。     

聚酯－聚醚嵌段共聚物的合成及抗静电性能研究

研究和分析了ＰＥＧ分子量、加料次序、反应时间和温度、物料比例、分散剂和固相缩聚等因素对ＰＥＴ－ＰＥＧ嵌段共聚物分子量和耐水性的影响。合成的嵌段共聚酯醚与ＰＥＴ共混纺丝可以显著改善ＰＥＴ纤维的抗静电性能。