尺寸链在机器装配中的应用

着重分析应用尺寸链的原理，达到装配精度的方法，合理解决机器质量的保证问题。     

Numerical Calculations of Wall Pressures and Stresses in Steel Cylindrical Silos with Concentric and Eccentric Hoppers

This article presents finite element (FE) calculations of stresses in a silo structure caused by the loads exerted by the discharging material. Two different conical hoppers were studied, concentric and eccentric withdrawal. The eccentricity was introduced by the change of the outlet position towards one side of the hopper, and the influence of this modification is presented. The simulation of silo flow with the common Drucker-Prager model for bulk solids was performed in order to obtain the wall pressure distribution. All FE calculations are carried out with aid of the commercial software ABAQUS. Significant differences are found in the hopper-wall stresses between the concentric and eccentric cases. Strong bending actions appear in the eccentric hopper, and they are influenced by stiffness of the hopper/cylinder junction.     

双协调自由界面模态综合方法在框架结构上的应用研究

本文研究双协调自由界面模态综合方法,并将其运用于土木工程结构中。首先介绍了双协调自由界面模态综合方法的基本思路和公式推导,进而提出了相应的模态截取准则。最后,通过一个11层的框架结构进行数值模拟。数值模拟分析结果验证了双协调自由界面模态综合方法在土木工程结构上应用的可行性,进一步通过算例对比,证明了本文提出的双协调自由界面模态综合方法的模态截取准则的正确性,为今后大型结构子结构研究方法提供了必要的理论基础。     

Explicit solutions for the response probability density function of nonlinear transformations of static random inputs

This work is the second paper of two companion ones. Both of them show the use of a new version of the Probabilistic Transformation Method (PTM) for finding the probability density function (pdf) of a limited number of response quantities in the transformations of static random inputs. This is made without performing multi-dimensional integrals of the response total joint pdf for saturating the non-interested variables. While in the first paper the linear transformations have been considered, in the present one some nonlinear systems are taken into account. In particular, first the case when the loads on a linear structural system are a nonlinear combination of static random inputs is studied. Then the attention is placed on the case of nonlinear structural systems, for which the new version of the PTM allows to determine approximated, but accurate, results.     

几种典型目标体外形的高频回声特性研究

本文研究常见、典型的水中目标体外形的回声特性是目标回声特性研究的基础内容。采用基于Kirchhoff近似的平面元方法和几何建模软件相结合的数值方法计算研究了三种典型外形的收发合置的目标强度。通过对计算结果的对比分析,归纳得到了一些高频回声规律。     

The Decomposition Method For Solving Of A Class Of Singular Two-Point Boundary Value Problems

In this paper, a class of nonlinear singular two-point boundary value problems are solved by using Adomian's decomposition methods. The approximate solution of this problem is calculated in the form of series with easily computable components. Finally, we give a nonlinear numerical example.     

Adsorption of Uranium from Dilute Aqueous Solution on Inorganic Adsorbents

Abstract

The adsorption of uranium from a dilute aqueous solution by a large number of inorganic adsorbents has been investigated. A mixture of aluminum hydroxide, ferric hydroxide, and activated carbon in the weight ratio 1:3:4 has shown a high adsorbability for uranium. The separation of uranium from a dilute aqueous solution by this mixed adsorbent under various temperatures and pH values has been studied. The adsorbability was found to exhibit a maximum at pH 4.0 to 5.5 and to decrease with increasing temperature. A number of eluting solutions for the desorption of uranium from the mixed adsorbent were also tested; 1 N (NH₄)₂ CO ₃ was found to be the most suitable eluting solution (93% recovery of uranium).     

A Two-Stage Method for an Approximate Calculation of Statically Indeterminate Trusses

The paper presents the principles of a method, which in two simple stages makes possible to carry out the statically calculation of values of forces acting in the fiat static indeterminate trusses. In each stage, it is considered the static determinate truss, scheme of which is obtained after remove the suitable number of members from the basic static indeterminate truss. The both intermediate statically determinate trusses are of the same clear span and they are loaded by forces of half values applied to the corresponding truss nodes. The method applies one of the typical procedures of calculation of the statically determinate trusses and then it is applied in an appropriate way the rule of superposition for obtaining the final values of forces acting in particular members of the basic truss. The values of forces calculated in this way are of a very close approximation to the force values determined in the special and complex ways being considered as the exact calculation methods. The proposed method can be useful mostly but not only for the initial structural design of such systems. The simplicity of the two-stage method justifies an assumption that it can be relatively easy and worthy to adjust to the requirements of the computer aided technology of statically calculation of the complex forms of trusses.     

Reliability of an Independent Component,s-Spare System with Exponential Life Times and General Repair Times

In this paper, the reliability of a system with N independent components supplied with a pool of s spares is investigated. The components have an exponential life time distribution and the failed components are repaired, one at a time, with a general repair time distribution. Numerical results are presented for the mean time to system failure (system is said to fail when a component fails with no spare available) and the reliability of the system in some special cases of interest.     

基于磁弹法的磨削烧伤检测及定标在企业中的应用

描述磨削烧伤及相应检测手段，介绍一种新颖、高效、实用的“磁弹法”的工作原理，以及专用仪器，重点叙述应用磁弹法时的评定指标和仪器的特征值定标，通过实例予以说明。