糖厂现用连续离心机的研究及生产实践

在各糖厂现用连续离心机原有生产实践基础上，对其机械吸震、加温、布温、机索结构、物料密封、机座等部件做了进一步改进，并取得可观的实效。     

Inhibiting and deactivating effects of water on the selective catalytic reduction of nitric oxide with ammonia over MnOx/Al2O3

The effect of water on the selective catalytic reduction (SCR) of nitric oxide with ammonia over alumina supported with 2–15 wt.-% manganese oxide was investigated in the temperature range 385–600 K, with the emphasis on the low side of this temperature window. Studies on the effect of 1–5 vol.-% water vapour on the SCR reaction rate and selectivity were combined with TPD experiments to reveal the influence of water on the adsorption of the single SCR reactants. It turned out that the activity decrease due to water addition can be divided into a reversible inhibition and an irreversible deactivation. Inhibition is caused by molecular adsorption of water. TPD studies showed that water can adsorb competitively with both ammonia and nitric oxide. Additional kinetic experiments revealed that adsorbed ammonia is present in excess on the catalyst surface, even in the presence of water. Reduced nitric oxide adsorption is responsible for the observed reversible decrease in the reaction rate; the fractional reaction order changes from 0.79 in the absence of water to 1.07 in its presence. Deactivation is probably due to the dissociative adsorption of water, resulting in the formation of additional surface hydroxyls. As the amount of surface hydroxyls formed is limited to a saturation level, the deactivating effect on the catalyst is limited too. The additional hydroxyls condense and desorb in the temperature range 525–775 K, resulting in a lower degree of deactivation at higher temperature. A high temperature treatment at 775 K results in a complete regeneration. The amount of surface hydroxyls formed per unit surface area decreases at increasing MnO_x-loading. The selectivity to the production of nitrogen is enhanced significantly by the presence of gas phase water.     

关于中小型勘察设计单位转企改制问题的探讨

本文针对中小型勘察设计单位存在的所有制形式单一,经营方式落后,队伍结构不合理,负担过重,内部机制不活,抵御风险能力差等问题,阐述了改制的重要性和紧迫性,提出了建立适应社会主义市场经济要求的工程勘察设计管理体制和运行机制.     

阻燃沥青的研究进展与建议

介绍了对沥青进行阻燃处理的必要性、沥青的阻燃机理、常用阻燃剂的特性及其作用模式;参照塑料材料阻燃性能的测试手段介绍了常用的沥青材料阻燃性能的测试方法;最后分析了我国沥青阻燃的研究现状,指出了该领域存在的主要问题,并给出了相应的建议。     

微量稀土元素在铸钢中的应用

综述了近几年稀土在铸钢中的应用研究现状 ,分析了稀土在铸钢中的作用机理及对铸钢性能的影响 ,指出了铸钢中加入稀土的原则 ,提出了今后的研究方向     

Substituted uracils as corrosion inhibitors for copper in 3% NaCl solution

Substituted uracils were tested as corrosion inhibitors of copper in 3% NaCl medium using electrochemical polarisation, impedance measurements and non-electrochemical techniques (weight loss, IR and UV-visible). This study permitted to follow the evolution of the inhibitory effect of the uracil derivatives, according to their substituents, on copper in 3% NaCl medium. Comparison of results showed that dithiouracil (DTUr) was the best inhibitor. The maximum inhibition efficiency reached 98% at 10⁻³ M. DTUr adsorbs on the copper surface according to the Frumkin isotherm model.     

石蜡光氯化合成氯蜡－70的研究──（Ⅲ）反应过程致色因素考察及生色机理研究

氯蜡－７０是—应用广泛、性能优良的精细化工产品，其色泽是—重要的技术指标，直接影响着产品的质量和应用。本文考察了合成反应过程导致生色的因素，指出原料中含有的少量环烷烃、芳烃、杂环有机物及少量无机杂质能影响产品的色泽，实验表明温度过高，光源波长选择不当也是致色的重要原因。研究了致色的过程，提出其生色历程是按照β－消除反应机理进行的，并做了具体描述。     

环氧油一步合成的反应机理和动力学研究

研究了环氧油一步合成的反应机理和动力学；结合实验结果和理论分析动力学模型，首次提出：在适当的反应条件下，油脂的一步环氧化反应动力学模型可以表示为过氧酸生成反应动力学模型；其实验动力学模型方程为：ｒ０＝ｋ［Ｈ２Ｏ２］（０．９９）［ＨＯＡｃ］（０．９７），其中ｋ与催化剂用量有关。     

无横梁高刚性轧机的结构分析

本文介绍了无横梁高刚性轧机的新颖结构，分析了该轧机高刚性及轴承长寿的原理。该轧机在现场使用中，取得了良好的效果。     

三异丙氧基铝的制备及催化机理

本文介绍了采用新的原料予处理方法合成三异丙氧基铝，并且选择更为合理的工艺手段精制产品，同时探讨了产物的催化合成机理。