Tensile flow behavior of ultra low carbon,low carbon and micro alloyed steel sheets for auto application under low to intermediate strain rate

This paper is concerned with tensile characteristics of auto grade low carbon, ultra low carbon and micro alloyed steel sheets under low to intermediate strain rates ranging from 0.0007 to 250 s⁻¹. Experimental investigation reveals two important aspects of these steels under intermediate strain rate deformation. Firstly, the yield stress increases with strain rate in all these steels. Of course yield stress increment is higher for low carbon and ultra low carbon steel sheets. Secondly, the strain hardening rate drastically decreases with strain rate for low carbon and ultra low carbon steel sheets, whereas it remains steady for micro alloyed steel sheets. Based on these observations, a constitutive model has been proposed which predicts the strain rate sensitive flow behavior of all these grades within the strain rate range of automotive crash event.     

Strength and deformation properties of frozen sand under a true triaxial stress condition

In recent years, the mechanical properties of frozen soils under complex stress states have attracted significant attention; however, limited by the test apparatus, true triaxial tests on frozen soils have rarely been conducted. To study the strength and deformation properties of frozen sand under a true triaxial stress state, a novel frozen soil testing system, i.e., a true triaxial apparatus, was developed. The apparatus is mainly composed of a temperature control system, a servo host system, a hydraulic servo loading system, and a digital control system. Several true triaxial tests were conducted at a constant minor principal stress (σ₃) and constant intermediate principal stress ratio (b) to study the effect of intermediate principal stress (σ₂) on the mechanical properties of frozen sand. The test results showed that the stress–strain curve can be mainly divided into three stages, with evidence of strain hardening characteristics. The strength, elastic modulus, and friction angle increased with the increase in b from 0 to 0.6, but decreased when increasing b from 0.6 to 1, whereas the cohesion varied little with the variation in b. The deformation in the direction of σ₂ changed from dilative to compressive and that in the direction of σ₃ remained dilative throughout.     

反应堆堆外核测系统探测器选型分析

介绍了核电厂反应堆堆外核测系统三个不同量程探测器的应用现状、主要配置、主要技术参数及对比分析,同时结合探测器的相应特点和现场使用经验,对其选型原则及未来发展趋势进行了归纳分析。     

Hyperdoping of Si by ion implantation and pulsed laser melting

Ion implantation followed by pulsed laser melting is an extensively-studied method for hyperdoping Si with impurity concentrations that exceed the equilibrium solubility limit by orders of magnitude. In the last decade, hyperdoped Si has attracted renewed interest for its potential as an intermediate band material. In this review, we first examine the important experimental results on both solid and liquid phase crystal regrowth from early laser annealing studies. The highly non-equilibrium regrowth kinetics following pulsed laser melting and its implications for dopant incorporation processes are discussed. We then review recent work in hyperdoped Si for enhanced sub-band gap photoresponse and give a brief discussion on photodetector device performance.     

从中质洗油提取高纯度2,6-二甲基萘的工艺研究

2,6-二甲基萘是重要的有机化工原料,通过对中质洗油进行减压精馏,富集2,6-二甲基萘,对富含2,6-二甲基萘的馏分进行多次溶剂结晶,以提高产品中2,6-二甲基萘的含量。实验结果表明,减压精馏富集的2,6-二甲基萘馏分,经过五次溶剂结晶,可得到纯度为99.72%的2,6-二甲基萘产品。     

Use of Sb spray for improved performance of InAs/GaAs quantum dots for novel photovoltaic structures

Photoluminescence output from InAs/GaAs quantum dots has been improved by a Sb treatment immediately prior to capping with GaAs. Spectra taken at 300 and 80 K show a significant increase in output intensity when the quantum dots are exposed for 15 s under a Sb flux of approximately 0.1 monolayers per second, but this improvement is lost when the Sb exposure is extended to 30 s. There is no significant shift in the emission energies between samples indicating strain relief due to the cap layer is not responsible for the improvement. Analysis of temperature dependent photoluminescence taken between 80 and 300 K show increased activation energies at lower temperatures when an Sb spray is used, suggesting passivation of deep defect levels. For the higher temperature activation energy, corresponding to carrier escape from the QD to the barrier, whilst a 15 s Sb spray gives a substantial increase, the longer 30 s Sb spray sees the activation energy decrease, a result deduced to be due to Sb segregation providing shallow defect levels. A band structure including a very thin GaAsSb layer adjacent to the quantum dots is used to explain these results, with the 30 s Sb spray leading to shallow Sb segregation related defects and a lower activation energy. Depth dependent X-ray photoelectron spectroscopy data support the band structure proposed to explain the photoluminescence results and also reveals the highest concentration of Sb at the sample surface suggesting a ‘floating layer’ of Sb during growth of the GaAs cap. Some of the implications of these results, for growth of quantum dot samples and for two novel solar cell proposals, the intermediate band and hot carrier solar cells, are discussed.     

An analytical solution to wellbore stability using Mogi-Coulomb failure criterion

Deep wellbores/boreholes are generally drilled into rocks for oil and gas exploration, monitoring of tectonic stresses purposes. Wellbore and tunnel in depth are generally in true triaxial stress state, even if the ground is under axisymmetric loading condition. Stability of such wellbores is very critical and collapse of wellbore must be avoided. Mogi-Coulomb failure criterion is a better representation of rock strength under true triaxial condition. In this paper, an analytical solution is proposed using Mogi-Coulomb failure criterion. The solution is obtained for rock mass exhibiting elastic-perfectly plastic or elastic-brittle-plastic behaviour considering in-plane isotropic stresses. The proposed solution is then compared with exact analytical solution for incompressible material and experimental results of thick-wall cylinder. It is shown that the results obtained by the proposed analytical solution are in good agreement with the experimental results and exact analytical solution. A reduction of about 13%–20% in plastic zone from the proposed closed-form solution is observed, as compared to the results from the finite element method (FEM) based Mohr-Coulomb criterion. Next, the influences of various parameters such as Poisson's ratio, internal pressure (mud weight), dilation angle, and out-of-plane stress are studied in terms of stress and deformation responses of wellbore. The results of the parametric study reveal that variation in the out-of-plane stress has an inverse relation with the radius of plastic zone. Poisson's ratio does not have an appreciable influence on the tangential stress, radial stress and radial deformation. Dilation angle has a direct relation with the deformation. Internal pressure is found to have an inverse relation with the radial deformation and the radius of plastic zone.     

大青山东段火山成因膨润土矿床中蒙脱石的矿物学特征研究

本文通过对大青山不同成因类型的膨润土矿床中蒙脱石矿物学特征的详细研究，揭示了蒙脱石的一系列矿物性质间的联系，包括X射线衍射特征、晶体化学特征、差热分析特征。同时，探讨了不同类型蒙脱石（切脱型、过渡到、怀俄明型）与矿床成因类型、成矿原岩的依存关系。     

The Nitrolysis Mechanism of 3,7‐Dinitro‐1,3,5,7‐tetraazabicyclo[3,3,1]nonane

Two intermediates, 1,5‐dinitroso‐3,7‐dinitro‐1,3,5,7‐tetraazacyclooctane (DNDS) and 1‐nitroso‐3,5,7‐trinitro‐1,3,5,7‐tetraazacyclooctane (MNX), were isolated and characterized in the synthesis of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane (HMX) from the nitrolysis of 3,7‐dinitro‐1,3,5,7‐tetraazabicyclo[3,3,1]nonane (DPT) for the first time. When the nitrolysis of DPT was slowed down, two intermediates were detected with HPLC. It was proposed that electrophilic NO₂⁺ and NO⁺ from HNO₃ and N₂O₄ might attack nitrogen atoms at positions 3 and 7 of DPT to form the cations of the intermediates, then nucleophilic H₂O attacked the bridge carbon atoms of DPT to produce the intermediates, which were oxidized to form HMX.     

中水回用深度处理的必要性及与系统腐蚀与防护的关系

结合目前国内中水在火力发电厂回用的实际情况,对中水在回用中深度处理的工艺和凝汽器材料腐蚀机理进行了分析论述。