Au—9Ni—8In合金表面铟离子注入层的微观组织与性能的研究

利用透射电镜观察Au-9Ni-8In合金表面In~+注入后的微观组织,并分析有关性能的变化。研究结果表明,In~+注入使合金表层晶粒细化,晶格畸变,位错密度降低;表层组织的变化使合金的表层显微硬度提高,摩擦和磨损性能得到改善。     

离子注入铅的铝电极腐蚀的交流阻抗研究

通过测量25℃时1.28g/ml硫酸溶液中铝电极和离子注入铅的铝电极的交流阻抗谱,研究了铅离子注入量对铝电极的腐蚀速率的影响。在此基础上,测量了离子注入铅的铝电极和铝电极在同种介质中的Tafel曲线,辅助交流阻抗法研究电极的腐蚀行为。以此总结出离子注入铅的铝电极的耐腐蚀性能,并探讨了它的腐蚀机理。     

基于集成学习的离子通道药物靶点预测

新药研制成功的关键在于药物靶点的发现和准确定位.在已知的药物靶点中,离子通道蛋白是一类广受欢迎的靶点,它与免疫系统、心血管等疾病密切相关.对于靶点的发现,传统生物方法成本高、耗时久.因此,探讨了基于机器学习的离子通道蛋白药物靶点的挖掘,以加快药物靶点发现过程,节约经费.由于药物靶点相关序列的长度不一致,考虑了蛋白质序列编码的13种特征,它们能将不等长的蛋白质序列转化成等长序列.通过数值实验筛选能够较好地区分靶点和非靶点的特征子集,并采用集成学习的方法整合特征得到预测模型.通过与已有工作的比较表明,提出的集成模型能得到较高的准确率,具有很好的应用前景.     

Fabrication and characterization of APT specimens from high dose heavy ion irradiated materials

The next generations of advanced energy systems will require materials that can withstand high doses of irradiation at elevated temperatures. Therefore, a methodology has been developed for the fabrication of high-dose ion-irradiated atom probe tomography specimens at a specific dose with the use of a focused ion beam milling system. The method also enables the precise ion dose of the atom probe tomography specimen to be estimated from the local concentration of the implanted ions. The method has been successfully applied to the characterization of the distribution of nanoclusters in a radiation-tolerant 14YWT nanostructured ferritic steel under ion irradiation to doses up to 400 displacements per atom.     

Investigation of morphological and functional changes during neuronal differentiation of PC12 cells by combined hopping probe ion conductance microscopy and patch-clamp technique

PC12 cells derived from rat pheochromocytoma can differentiate into sympathetic-neuron-like cells in response to nerve growth factor (NGF). These cells have been proved to be a useful cell model to study neuronal differentiation. NGF induces rapid changes in membrane morphology, neurite outgrowth, and electrical excitability. However, the relationship between the 3D morphological changes of NGF-differentiated PC12 cells and their electrophysiological functions remains poorly understood.In this study, we combined a recently developed Hopping Probe Ion Conductance Microscopy (HPICM) with patch-clamp technique to investigate the high-resolution morphological changes and functional ion-channel development during the NGF-induced neuronal differentiation of PC12 cells. NGF enlarged TTX-sensitive sodium currents of PC12 cells, which associated with cell volume, membrane surface area, surface roughness of the membrane, and neurite outgrowth. These results demonstrate that the combination of HPICM and patch-clamp technique can provide detailed information of membrane microstructures and ion-channel functions during the differentiation of PC12 cells, and has the potential to become a powerful tool for neuronal research.     

中束流离子注入机工艺实现原理

粒子高速冲击其他材料并进入其中叫作离子注入。在半导体工业中,这个过程用来向纯净衬底上掺杂杂质而形成半导体。半导体工艺中这个特别的步骤是由一种特殊的粒子加速装置完成,这就是离子注入机。     

破伤风毒素的提纯及形成离子通道的特性

应用硫酸铵分段沉淀和 Ultrogei AcA_(34)凝胶过滤对破伤风毒进行了提纯,并对形成的离子通道在中毒作用中的功能进行了讨论。提纯的毒素与抗粗制毒素血清形成一条沉淀线,于聚丙烯酰胺凝胶电泳中形成单一的蛋白带,分子量为15万,等电点为5.95,毒力为1～3×10~4MLD/μg 蛋白。给小鼠注射低剂量毒素引起迟发性强直性痉挛;注射高剂量毒素引起快速的类肉毒毒素的松弛性麻痹,直至死亡。应用 Patch clamp 技术,破伤风毒素于人工磷脂膜上形成离子通道。只有当膜两侧存有 pH 梯度时毒素才形成离子通道,因此是 pH 依赖的。通道的电导系数为9 PS。     

聚合物在离子选择电极上的应用

本文概述了聚合物膜离子选择电极的发展,制备、应用等方面的研究情况;将聚合物膜离子选择电极分为固态膜类和液态膜类,分别对其优缺点和发展前景加以分析;并讨论了聚合物在敏感膜中的作用,以及聚合物结构对敏感膜性能的可能影响。     

CrAlN coatings deposited by cathodic arc evaporation at different substrate bias

CrAlN is a good candidate as an alternative to conventional CrN coatings especially for high temperature oxidation-resistance applications. Different CrAlN coatings were deposited on hardened steel substrates by cathodic arc evaporation (CAE) from chromium-aluminum targets in a reactive nitrogen atmosphere at negative substrate bias between − 50 and − 400 V. The negative substrate bias has important effects on the deposition growth rate and crystalline structure. All our coatings presented hardness higher than conventional CrN coatings. The friction coefficient against alumina and tungsten carbide balls was around 0.6. The sliding wear coefficient of the CrAlN coatings was very low while an important wear was observed in the balls before a measurable wear were produced in the coatings. This effect was more pronounced as the negative substrate bias was increased.     

Surface modification of biodegradable plastics by ion beams

Biodegradable plastics can be used as conventional plastics, while on disposal they decompose to water and carbon dioxide by microorganisms existing in natural environment. Products using biodegradable plastics have recently been developed in many companies pursuing ecology. In this study, surface modification of biodegradable plastics was carried out by inert ion beams for improvement of photo deterioration under an ultraviolet ray. The hardness of biodegradable plastics tended generally to decrease with irradiation of an ultraviolet ray. In this method, the hardness of ion-bombarded biodegradable plastics was kept at an initial value under an ultraviolet ray, because the modified layer by ion bombardment intercepted an ultraviolet ray. The hardness of He⁺ ion-bombarded biodegradable plastics showed larger value than that of Ar⁺ ion bombardment. He⁺ ion bombardment at ion energy of 10 keV produced the suitable property with both of high transmittance of a visible ray and high interception of an ultraviolet ray in a surface layer of biodegradable plastics.