低密度泡沫玻璃的研究与应用

低密度泡沫玻璃是利用碎玻璃制造的一种气孔率大于90%的隔热保温材料,它具有强度高、导热系数小、吸水率低、不吸湿、耐腐蚀等特性,在潮湿环境下抗冻性能好,是一种优良的低温、超低温隔热保温材料。该产品用途广泛,所用的原材料简单易得,但生产工艺过程比较复杂,生产过程控制精度要求较高,容易产生各种缺陷而影响产品的质量。本文对低密度泡沫玻璃的生产工艺过程进行详细的分析研究,提出相应的措施,确保产品的低密度和高成品率,提高产品的性能,扩大产品的使用范围。     

酚醛泡沫塑料研究

针对影响酚醛泡沫性能的诸多因紊的不确定性，对树脂粘度、发泡剂、固化剂、表面活性剂、工艺温度及其他因素对泡沫性能的影响进行了讨论。研究表明：当树脂粘度控制在2000-10000cps，发泡剂用量为3．7％-9．5％，固化剂用量为7．5%-2．5％，表面活性剂用量为3．5％-8.5％，发泡温度控制在70℃-80℃之间时，可制得质量较好的酚醛泡沫塑料。     

Foaming and chain extension of completely biodegradable poly(propylene carbonate) using DPT as blowing agent

Completely biodegradable foams of poly(propylene carbonate) (PPC) derived from carbon dioxide and propylene oxide were fabricated using N, N′-dinitroso pentamethylene tetramine (DPT) as chemical blowing agent, and urea as the activator to lower the decomposition temperature of DPT. Thermal decomposition behavior and gas evolution behavior of the DPT composite with various urea to DPT ratios were investigated to optimize the composition of the blowing agent. The formulation of blowing agent mixture and foaming condition, the foam morphologies, the molecular weight change, as well as the mechanical properties of produced PPC foams were studied extensively. The experimental results demonstrated that the greatest blowing ratio of 14.8 can be afforded in case 12 phr blowing agent was used at 170 °C for 30 min. Gel permeation chromatography (GPC) and thermal analysis revealed that DPT acted as both chain-extension agent and blowing agent for PPC matrix. The molecular weight of PPC subjected to foaming increased by 76%. The foamed PPC exhibited superior mechanical properties and can be used as packaging material for many practical applications.     

泡沫塑料加工过程中的气泡成核理论(Ⅱ)——剪切能成核理论及其发展

介绍了剪切流场中泡沫塑料加工的气泡成核理论,分析评述了剪切流场中泡核拉伸模型、空穴成核模型对气泡成核机理的解释及存在的不足;对静态熔体中气泡成核过程进行了能量描述;介绍了最新的气泡成核中的剪切能成核理论,该理论较完善地解释了剪切流场中气泡成核过程;最后指出了气泡成核理论研究的发展方向。     

EVA／EPDM／PVC三元聚合物合金软质泡沫体的制备及其在复合衬垫中的应用

采用物理共混以及化学交联模压发泡成型工艺制备聚乙烯－醋酸乙烯酯（ＥＶＡ）／乙丙橡胶（ＥＰＤＭ）／聚氯乙烯（ＰＶＣ）三元聚合物合金软泡沫体，并制成贴布复合衬垫。讨论了该体系的相容性，动态共交联与发泡的适配，以及贴布复合，造型等问题，结果表明，该衬垫可完合替代国外同类先进产品。     

化工企业实现清洁生产的策略评述

概述了世界银行推进中国清洁生产项目中１０家化工企业的清洁生产审计结果，总结分析了化工企业实行污染预防持续发展的策略，并对我国化学工业实现清洁生产提出了具体建议。     

制造泡沫玻璃的方法与模具

将泡沫玻璃配合料制备成块状物,将配合料块按规定间隙在模具中平铺码放并烧成,使配合料块熔为一体,形成较小变形的平板状泡沫玻璃.其制造模具是由底板、上盖及L型围板构成的箱型结构,模具各部位通过V字沟相互联结,保证各部位能自由地附着和脱离.模具多层码放烧制,模具间必须设置间隙.在模具上设置通孔可以有效地抑制膨胀过量问题.     

德国用环戊烷代替氟里昂（CFC）作为硬质PU泡沫发泡剂的新技术

本文介绍了环戊烷的运输，多元醇／环戊烷混合装置及混合料储存的技术并详细叙述使用环戊烷作为发泡剂的安全方法。     

Al2O3 coated glass by aerosol deposition with excellent mechanical properties for mobile electronic displays

Al₂O₃ thin film was deposited on Gorilla glass using an aerosol deposition method to improve the mechanical property of cover glass for mobile electronic device. The deposited Al₂O₃ film (approximately 1 μm thick) was a polycrystalline structure and showed a high light transmittance of approximately 90% in the visible light region. The CIE color space (L*a*b) measurement also showed a characteristic corresponding to the acceptable optical range of the cover glass. Further, it was confirmed that the bending strength improved by 10 %, as compared with bare Gorilla glass (from 6970 kgf/cm² to 7704 kgf/cm²), and the Vickers hardness increased to approximately 1700–2000 HV, as compared with that of Gorilla glass (<700 HV). Owing to the improved mechanical properties, the Al₂O₃ thin film exhibited good anti-scratch properties and is expected to be applied to the cover glass of various display products.     

高渗透稠油油藏氮气泡沫驱现场实践与认识

八面河油田面14区沙河街组沙三上段属于高孔高渗透普通稠油油藏,受储层非均质性,注水、边水推进等原因,在油田开发过程中表现出含水上升快,产量自然递减快,采出程度低的开发特点。针对高渗透稠油油藏特高含水开发初期稳油控水,2007年开展了整体氮气泡沫驱现场试验,取得了显著的控水增油效果,投入产出比为1∶7.0。研究结果对于同类油田氮气驱提高采收率具有一定的借鉴意义。