The extracorporeal circuit: Materials,problems, and solutions

The extracorporeal circuit in hemodialysis and related therapies facilitates passage of blood to and from the patient and forms an integral link with the safety systems of the proportioning system. Historically, elements of the circuit were subject to problems such as spallation introduced by the blood pump and plasticizer from the tubing sets leaching into the blood. Many of these early issues have been largely resolved, although there is still potential for further improvement and innovation. The introduction of such improvements and innovations into clinical practice is critically dependent upon their cost and benefit to patient and renal unit staff.     

Consumption of solutions containing sodium chloride is enhanced in female oxytocin-deficient mice.

Intact and ovariectomized oxytocin (OT)-deficient (OT-/-) and wild-type (OT+/+) mice were tested for consumption of 0.5 M NaCl solution or tap water in a 2-bottle choice test. During 3 days of acclimation, voluntary ingestion of NaCl was equal between genotypes. After overnight fluid deprivation, intact OT-/- mice ingested 2 times more NaCl solution than OT+/+ mice in the 6th hr, but not the 1 st hr, after reintroduction of fluid. Ovariectomized mice consumed less than intact mice after overnight fluid deprivation. When a 0.2 M NaCl solution was administered for 6 days in ovariectomized mice, OT-/- mice voluntarily consumed greater amounts than OT+/+ mice. After overnight fluid deprivation, consumption by OT-/- mice was 3 times that of OT+/+ mice at 1 hr and 2-fold greater after 6 hr. Enhanced intake of NaCl-containing solutions in female OT-/- mice suggests that central OT may be an important inhibitor of sodium consumption. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

混凝土骨料二维分布的模拟和应用

通过在一个矩形截面上模拟混凝土骨料的实际分布，获得了该截面上任一点的骨料分布密度和骨料分布的统计特性。模拟结果表明，当模拟次数趋向于无穷大时，截面上任一点的骨料分布密度趋向于定值，对于不同的骨料面积百分数，骨料分布密度曲线的形状十分相似，均由上升段和水平段两部分组成。基于这些模拟结果，利用数学拟合获得了骨料分布密度的解析表达式，并被混凝土实验所初步证实。作为一个应用，本文计算了混凝土截面上各点的氯离子扩散系数。     

硫酸铵-氯化亚锡-孔雀绿体系浮选分离铂

研究了在盐酸介质中硫酸铵存在下氯化亚锡—孔雀绿—水体系浮选分离铂的方法。在最佳实验条件下，铂的浮选率可达100．0％，并与常见贱金属完全分离。     

空心微珠改性硬质聚氯乙烯复合材料的应用研究

经过改性的超细空心微珠可以作为填料加入到硬质聚氯乙烯（PVC－U）树脂中，同时改善PVC树脂的流变性、冲击性能和刚性等性能。研究结果表明，超细空心微珠加入到硬质PVC管材中，可以明显改善PVC硬管的加工流动性能，显著缩短塑化时间，降低最大扭矩。而超细空民微珠加入到硬质PVC板材时，可以提高PVC硬板的冲击性能，减小制品的收缩率，赋予PVC硬板优异的耐腐蚀性能，且产品的各项性能均符合PVC板材国家标准GB／T4454－96。     

Simulation of toxic gases and vapours removal by activated carbon filters

The system ASC carbon filter/cyanogen chloride was studied by simulation. Three filter configurations and several models, taking into account Langmuir adsorption and second-order reaction between the adsorbed toxic vapour and the active metal on the surface, were developed.The effects of axial dispersion, number of reaction units, film mass transfer units and intraparticle mass transfer resistance on the breakthrough time were studied.Simulation results show that a complex model should be used in order to predict with reasonable accuracy the protection imparted by these filters.     

HPVC／PP共混改性研究：Ⅲ低分子量反应性化合物作相容剂

采用低分子量反应性化合物作相容剂，即化学交联体系来改善ＨＰＶＣ／ＰＰ共混物的相容性。考察了在不同共混比下，不同化学交联体系对共混物力学性能的影响，并观察了共混物的微观形态。结果表明，采用低分子量反应性化合物作相容剂，共混物的拉伸强度提高，但冲击强度无改善。分散相尺寸减小，相间粘接得到改善。并比较了３种增容方法的效果，发现ＣＰＥ是ＨＰＶＣ／ＰＰ共混物的最佳相容剂。     

Investigation of the Interaction of Sodium Chloride and Two Amino Sulfonic Acids,HEPES and MOPSO,by EMF Measurements

Ionic interactions in the two systems NaCl-HEPES (N-2-hydroxyethylpiperazine-N′-2-ethanesulfonic acid) and NaCl-MOPSO (3-(N-Morpholino)-2-hydroxypropanesulfonic acid) have been studied in terms of their mutual influence on the respective activity coefficients of each component. Activity coefficients for each component of the two systems and for corresponding buffers are calculated from emf measurements of solutions containing NaCl, the aminosulfonic acid, and its conjugate base in a NalSE/solution/AgCl-Ag cell at 5, 15, 25, and 37 °C.     

The effect of additives on the thermal stability of poly(vinyl chloride)

The effect of a range of organic additives on the thermal stability of poly(vinyl chloride), both with and without a chloroparaffin extender, was studied using a number of experimental techniques. Of the additives used the best overall balance was provided by pentaerythritol, which increased stability when the extender was present and had no effect when it was absent. The congo red test emerged as the most suitable technique, being consistent and inexpensive and able to screen several additives simultaneously. Isothermal differential thermal analysis correlated with the congo red test but required more expensive equipment, was time-consuming and demanded good mixing of the poly(vinyl chloride) compound to give reproducible results. Thermogravimetry was not sufficiently sensitive and the heat stability test was the least useful of all.     

Stability of Standard Electrolytic Conductivity Solutions in Glass Containers

The stability of solutions having an electrolytic conductivity, κ, of 5 μS/cm to 100 000 μS/cm packaged in glass screw-cap bottles, glass serum bottles, and glass ampoules was monitored for 1 year to 2 years. The conductivity was determined by measuring the ac resistance of the solution. Mass loss was also monitored for solutions packaged in bottles. The solutions were prepared using KCl in water (κ ≥100 μS/cm) or KCl in 30 % (by mass) n-propanol 70 % (by mass) water (κ ≤ 15 μS/cm). The conductivity changes were compared by packaging type and by nominal κ. The main causes of the κ changes are evaporation (screw-cap bottles) and leaching (screw-cap bottles, serum bottles, and ampoules). Evaporation is determined from mass loss data; leaching occurs from the glass container with no change in mass. The choice of optimal packaging, which depends on the conductivity level, is the packaging in which κ changes the least with time. Ampoules are the most suitable packaging for standards having nominal κ values of 500 μS/cm to 100 000 μS/cm. Screw-cap bottles are most suitable for standards having a nominal κ of 5 μS/cm to 100 μS/cm.