重组G145R HBsAg亲和纯化方法的建立及其应用

目的建立重组乙型肝炎病毒G145R变异HBsAg抗体亲和纯化方法。方法用抗-HBs单克隆抗体(D12- McAb)制备亲和层析胶,对2A8细胞(分泌G145R变异HBsAg)培养上清盐析物进行亲和纯化。采用SDS-PAGE、Western blot及ELISA,对纯化产物的纯度、特异性、含量和回收率进行鉴定,并与同法纯化的HBsAg阳性血清及r-wHBsAg提取物进行比较。结果D12-McAb对重组真核表达G145R变异HBsAg、HBsAg阳性血清及r-wHBsAS三者具有相似的亲和性,产物纯度分别为90.3%、95.2%和93.1%,回收率分别为43.3%、72.0%和66.4%。结论已成功地建立了重组G145R变异HBsAg抗体亲和纯化方法,为G145R变异以及其他HBV免疫逃逸变异感染的深入研究奠定了重要的技术基础。     

胺菊酯·高效氯氰菊酯气雾剂的气相色谱分析

介绍了 0 .2 8 %胺菊酯·高效氯氰菊酯气雾剂的气相色谱分析方法。选用 5 %SE - 30 ChromsorbWAW -DMCS(15 0～ 180um)色谱柱 ,以邻苯二甲酸二正辛酯为内标物进行定量分析测定 ,该方法简单、快速、准确、适用。结果表明胺菊酯和高效氯氰菊酯的标准偏差分别为 0 .2 4 %和 0 .11% ;变异系数分别为 0 .94 %和 1.74 % ;平均回收率分别为 99.6 4 %和 99.95 % ;线性回归系数分别为 0 .9999和 0 .9998。     

CO2在全氟羧酸离子交换膜内促进传质特性的研究

本文以全氟羧酸离子交换膜为支撑体、乙二胺(EDA)为活性络合剂、制备促进传质膜。在常用的工业条件下,测定了纯CO_2以及CO_2/N_2二元混合物在该膜内的渗透通量。实测结果表明,此膜对CO_2的促进因子可达13.8,而对CO_2/N_2的分离因子高达316。本文假设促进传质过程的控制步骤为气体在膜相的扩散,据此导出了相应的机理模型,该模型与实测结果吻合良好。     

Mandibular gland secretions of the male beewolvesPhilanthus crabroniformis,P. barbatus,andP. pulcher (Hymenoptera: Sphecidae)

The composition of the territorial marking pheromones from mandibular glands of males of the beewolvesPhilanthus crabroniformis, P. barbatus, andP. pulcher have been determined. The structures of the components were elucidated by gas chromatography-mass spectrometry and gas chromatography-Fourier transform infrared spectroscopy. The major compound ofP. crabroniformis is isopropyl tetradecanoate, with somewhat lesser amounts of 2-tridecanone, 3-methyl-3-butenyl tetradecanoate, and 928 (Z)(E)-11-eicosen-1-ol. The major compounds ofP. barbatus are ethyl tetradecanoate and hexadecanal, which are present in approximately a 6040 ratio. These two compounds comprise over 95% of the neutral lipids. Also present in lesser amounts are ethyl dodecanoate, tetradecanal, hexadecan-1-ol, a ^x -octadecen-1-ol, and octadecan-1-ol. The major compounds ofP. pulcher are ethyl (Z)-7-hexadecenoate and geranylgeraniol acetate, which comprise nearly 90% of the neutral lipid fraction, with smaller amounts of tetradecanal, pentadecanal, and ethyl hexadecanoate; trace amounts of ^x hexadecenal, hexadecanal, and octadecanal are also present.     

Degradation of cellulosic and hemicellulosic substrates using a chelator‐mediated Fenton reaction

The involvement of catechol and hydroxamate chelators, along with hydrogen peroxide and Fe³⁺, in the degradation of cellulosic and hemicellulosic substrates was examined with the purpose of improving our current knowledge of the non‐enzymatic mechanisms involved in wood biodegradation by fungi. It could be demonstrated that a catechol chelator‐mediated Fenton reaction not only clearly degraded hemicellulosic substrates but also significantly accelerated and increased the effectiveness of degradation reactions. On the other hand, when a hydroxamate chelator‐mediated Fenton reaction was used, an inhibitory effect was observed. When cellulosic substrates underwent a chelator‐mediated Fenton reaction, no significant difference in degradation was observed between catechol and hydroxamate chelator‐mediated reactions. However, a catechol‐mediated reaction did accelerate the degradation of cellulosic substrates at the beginning of reactions. In addition, it was observed that with a chelator‐mediated Fenton reaction, oxidation of cellulose proceeds depolymerization. Copyright © 2005 Society of Chemical Industry     

Synthesis and characterization of new functional poly(urethane‐imide) crosslinked networks

To synthesize new functional poly(urethane‐imide) crosslinked networks, soluble polyimide from 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride, 4,4′‐oxydianiline, and maleic anhydride and polyurethane prepolymer from polycaprolactone diol, tolylene 2,4‐diisocyanate and hydroxyl ethyl acrylate were prepared. Poly(urethane‐imide) thin films were finally prepared by the reaction between maleimide end‐capped soluble polyimide (PI) and acrylate end‐capped polyurethane (PU). The effect of polyurethane content on dielectric constant, residual stress, morphology, thermal property, and mechanical property was studied by FTIR, prism coupler, Thin Film Stress Analyzer (TFSA), XRD, TGA, DMTA, and Nano‐indentation. Dielectric constant of poly(urethane‐imide) thin films (2.39–2.45) was lower than that of pure polyimide (2.46). Especially, poly(urethane‐imide) thin films with 50% of PU showed lower dielectric constant than other poly(urethane‐imide) thin films did. Lower residual stress and slope in cooling curve were achieved in higher PU content. Compared to typical polyurethane, poly(urethane‐imide) thin films exhibited better thermal stability due to the presence of the imide groups. The glass transition temperature, modulus, and hardness decreased with increase in the flexible PU content even though elongation and thermal expansion coefficient increased. Finally, poly(urethane‐imide) thin films with low residual stress and dielectric constant, which are strongly affected by the morphological structure, chain mobility, and modulus, can be suggested to apply for electronic devices by variation of PU. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 113–123, 2006     

Kinetics of microwave‐assisted polymerization of ϵ‐caprolactone

The kinetics of polymerization of ?‐caprolactone (CL) in bulk was studied by irradiating with microwave of 350 W and frequency of 2.45 GHz with different cycle‐heating periods (30–50 s). The molecular weight distributions were determined as a function of reaction time by gel permeation chromatography. Because the temperature of the system continuously varied with reaction time, a model based on continuous distribution kinetics with time/temperature‐dependent rate coefficients was proposed. To quantify the effect of microwave on polymerization, experiments were conducted under thermal heating. The polymerization was also investigated with thermal and microwave heating in the presence of zinc catalyst. The activation energies determined from temperature‐dependent rate coefficients for pure thermal heating, thermally aided catalytic polymerization, and microwave‐aided catalytic polymerization were 24.3, 13.4, and 5.7 kcal/mol, respectively. This indicates that microwaves increase the polymerization rate by lowering the activation energy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1450–1456, 2004     

Study on Jet Coflow Packing Tray

Experimental study on hydrodynamics and mass transfer efficiency of jet coflow packing tray (JCPT) was conducted in a φ285 mm column and a φ200 mm column, respectively. Compared with new vertical sieve tray which has been applied in the petrochemical industry since 1968, the JCPT has lower pressure drop, higher capacity and higher mass transfer efficiency, and seems promising in commercial application.     

原子吸收光谱法测定土壤中的微量金属元素

采用火焰原子吸收光谱法测定了不同地区土壤样品中的铅、铜、镍、锌元素的含量,相对标准偏差为0.1-3.3,回收率为99.6%-101.6%。该方法简单、快速,并具有良好的精密度和准确度。重点讨论了前处理方法、共存离子对测定结果的影响。     

EXPERIMENTAL STUDIES OF NUCLEATION PHENOMENA WITHIN THERMAL BOUNDARY LAYERS—INFLUENCE ON CHEMICAL VAPOR DEPOSITION RATE PROCESSES

In carrying out partial vapor condensations using actively cooled surfaces it is known that 'mist' formation can occur within thermal boundary layers (Rosner and Epstein, 1968), dramatically modifying total deposition fluxes. Using a combination of flash-evaporation (Rosner and Liang, 1986) and laser probing techniques, we report new experimental results on binary alkali salt (K₂SO₄ + Na₂SO₄) deposition from combustion gases showing that the deposition rate of potassium sulfate first increases with the addition of sodium sulfate until the concentration of Na₂SO₄ reaches a (target surface temperature dependent) 'threshold' value. Further increases in the concentration of Na₂SO₄ dramatically decrease the total deposition rate of K₂SO₄, implying that potassium sulfate-containing microdroplets are formed within the thermal boundary layer, which, despite their thermophoretic drift toward the target, are not collected as effectively as the 'parent' K₂SO₄-vapor species. Laser light scattering measurements clearly reveal that suspended particles exist near the deposition surface under these conditions. Our experimental results on mass transfer rate and light scattering are consistent with those predicted using laminar boundary layer theory (Castillo and Rosner, 1989b) coupling both binary salt vapor deposition with particle vapor scavenging and deposition. Comparisons of our observed mist onset conditions (implying critical supersaturations near unity) with those expected using homogeneous nucleation theory suggest that the binary alkali sulfate mist nucleation mechanism is, instead, heterogeneous, even in our relatively 'clean' combustion products. Because of the; well-known vapor pressure reduction phenomenon associated here with the formation of non-ideal solutions, binary systems are shown to provide convenient 'vehicles' to investigate BL mist formation onset conditions and CVD-rate consequences without requiring the more extreme surface coolings characteristic of unary condensible vapor systems. An understanding of this dramatic phenomenon, obtained via such laboratory experiments and calculations, will allow its inclusion in future deposition rate calculations of engineering importance.