液体火箭发动机研制情况的一些回顾

４０年来，我国液体火箭发动机的研制工作取得了很大成绩。文中对发动机的一些研制情况作了回顾，对ＹＦ－７３和ＹＦ－７５氢氧发动机的设计特点、飞行结果作了简单叙述。对今后工作也提出了看法。     

Asymmetric alumina membranes electrochemically formed in oxalic acid solution

Alumina membranes were fabricated by anodizing aluminium metal in 0.15 M oxalic acid. The growth kinetics of the porous layer were investigated in the temperature range –1 to 16 °C using linear potential scans up to 70 V. The faradaic efficiencies of metal oxidation and of porous layer formation, determined by applying Faraday's law, were found to be independent of both temperature and electrical charge. SEM analysis of the metal-side and solution-side surfaces revealed different morphologies. After dissolution of the barrier layer in phosphoric acid, the metal-side surface showed circular pores whose size of about 90 nm was found to be uniform and independent of temperature. The pore population was also practically independent of temperature and a value of about 4 × 10¹³ pores m^–2 was determined. On the solution-side surface the presence of a deposit partially occluding the mouths of pores was observed. This coating could be removed by chemical etching in NaOH or thermal treatment at 870 °C, where decomposition of oxalate occurs. This supports the hypothesis that the deposit consists of an aluminium salt containing oxalate anions precipitated from the solution. The results show that it is possible to control the morphological characteristics of the anodic alumina membranes by careful choice of experimental conditions.     

Multi‐layered flat‐surface micro‐optical components directly molded on an LCD panel

Abstract— We have developed a process to fabricate optical components, such as a lens, prism, or diffuser, directly on to a glass substrate. Processes include precision mastering by diamond cutting and multi‐layer photopolymer (2P) molding to realize flat surfaces and the integration of multiple components with an alignment within a few micrometers.     

Finite element analysis of partly wrinkled reinforced prestressed membranes

Wrinkling is a well known phenomenon experimented by tension membranes in Civil Engineering applications. This paper will present an efficient numerical technique for the computational simulation of such wrinkles in a prestressed membrane. In particular, the relaxed energy approach (Pipkin in IMA J Appl Math 36:85–99, 1986) is particularized for prestressed membranes (Gil in Textile composites and inflatable structures, CIMNE, 2003) undergoing moderate strains. Wrinkling conditions in terms of the Euler-Lagrange finite deformation tensor along principal directions will be obtained. This will provide a framework to describe properly the initial instant when wrinkles start to be encountered in a prestressed Saint Venant–Kirchhoff hyperelastic membrane. Subsequently, a modified Helmholtz’s free energy functional will be introduced with the purpose of describing the modified constitutive behaviour of the continuum after the onset of wrinkling. Consistent derivations of the stress tensor as well as the constitutive tensor will de depicted. The results will be particularized for membranes and cables in a Finite Element discretization basis. Some numerical examples will prove the accuracy and robustness of the described algorithm.     

IR Radiometry Optical System View Factor and Its Application to Emissivity Investigations of Solid and Liquid Phases

An optical system for fast IR radiometry designed for investigations of thin film thermal properties and pulsed laser melting was analyzed in this work. A methodology for determination of the view factor from calibration measurements was developed. The view factor (0.0255) of the optical system containing two paraboloid mirrors was determined experimentally from calibration measurements on pure metals and metallic alloys. The knowledge of the view factor was then applied to normal emissivity investigations at IR wavelengths. The emissivity of tungsten films prepared by magnetron sputtering was determined for different deposition conditions, varying between 0.036 and 0.071. Liquid phase emissivities of Cu, Mo, Ni, Si, Sn, Ti, and steel were also determined and were found to be higher than solid-state emissivities as predicted from the literature. A knowledge of the liquid-state emissivity of silicon enabled recalculation of the IR signal evolution to the temperature evolution, during and after a nanosecond laser pulse. This was not possible by use of the usual calibration because of silicon’s semi-transparent behavior in the IR range (1–10 μm) in the solid-state phase.     

油罐液位温度自动检测系统及其程序设计

本文介绍了燃油火力发电厂油罐液位及温度数据的计算机数据自动采集及处理系统的结构和基于WINDOWS的可视化程序设计方法，该系统结构简单，成本低，采用RS－485数据接口可视现2千米内的数据通讯，是中小企业实现自动化管理的最佳解决方案。     

MODELING LIQUID MASS TRANSFER IN HIGEE SEPARATION PROCESS

Correspondence concerning this paper should be addressed to Professor Richard S.H. Mah. Hsien-Hsin Tung is now affiliated with Department of Chemical Engineering, California Institute of Technology

Penetration theory is used to describe the liquid mass transfer in Higee separation process. Within a possible range of effective areas, it is shown that the predicted mass transfer coefficients are in reasonable agreement with the estimated mass transfer coefficients. The estimated coefficients were calculated from the experimental data and the possible effective areas. Hence it is concluded the penetration theory is generally applicable to describe liquid mass transfer in Higee separation process. The comparison also suggests that liquid mixing at the junctions of packing materials may be more complete in Higee process than in traditional process.     

透湿膜的透湿机理与膜的研究概况

基于透湿膜的空气除湿是一种比较新颖的空气除湿方法。本文介绍了各种膜在空气除湿领域的应用情况，结合对膜制备工艺的简要介绍，侧重对原除湿原理，亲水性的高分子纤维素膜，凝胶膜和分子筛无机膜在空气除湿领域的研究和进展进行了分析。     

纳米ZnO薄膜制备及液态源掺杂

用真空蒸发法在玻璃和单晶硅片 (10 0 )上制备Zn薄膜 ,然后对Zn薄膜进行氧化、热处理获得纳米ZnO薄膜。对在硅片上制备的Zn薄膜一次性进行高温掺杂、氧化获得纳米ZnO∶P和ZnO∶B薄膜。研究不同氧化、掺杂温度和时间对薄膜结构、电学性能的影响。结果表明 :氧化温度和时间对ZnO薄膜结构影响较大 ,液态源掺P可明显改善纳米ZnO薄膜的导电性能、结构特性和化学组分     

液态烃球罐安全应用探讨

液态烃常温球罐储存技术相当成熟,但在实际应用方面仍然存在许多问题,影响安全储存。针对使用过程中所了解的一些具体做法进行了分析和探讨,对球罐的改造和设计提供了必要的参考。