济钢350m^3高炉高富氧生产技术

分析了济钢350m^3高炉高富氧对产量,理论燃烧温度,炉况顺行状况,焦比和生产效益的影响,高富氧可提高产量,但升高焦比和高炉理论燃烧温度,一定程度上影响高炉顺行,存在富氧效益最大化的适宜富氧率.高炉生产应低富氧高喷煤,根据钢目前的情况,富氧率经2%-3%为宜.     

New chemical structural features of coal. The structure of coal products

The object of this paper is to demonstrate the usefulness of the transalkylation reaction for determining chemical structural features of products derived from coal. For example, the method is applied to derivatized coals, coals modified by thermolysis, and materials physically or chemically separated from coals. Data are presented for the pyridine soluble and insoluble parts of two coals, an O-methylated coal, a Birch reduced coal, a solvent refined coal, and a coke. Similarities and differences in chemical make-up of these materials are discussed.     

榆林气田低产低效井开发分析评价

榆林气田自1999年投入开发以来,产能建设大幅提高,生产规模成倍增长。随着气田开发规模的扩大,气井数量成倍增加,低产低效井的数量随之增加,对低产低效期间加强研究意义重大。以理论知识为指导,利用开发生产资料对榆林气田低产低效气井的地质特征,开发现状,管理制度,下步开发措施等方面予以分析与研究,提出具体建议或措施;寻找榆林气田低产低效井合理的开发方式及生产模式。     

超高分子量聚乙烯衬板在煤仓中的应用

介绍了井底煤仓溜煤斜面采用超高分子量聚乙烯衬板安装及应用情况 ,对井底煤仓棚煤原因及解决办法进行了探讨     

库车坳陷煤生物标志物组成随成熟度的变化特征

对塔里木盆地库车坳陷三叠系和侏罗系的11个岩心与露头煤样的地球化学分析表明，煤的生物标志物组成随演化程度的增加而有规律的变化：成熟早期（镜质组反射率Ro／1．0％）煤的生物标志物组成反映了沉积环境和生源的特征；成熟晚期（1．10％＜Ro＜1．30％）煤的生物标志物特征受成熟度的控制作用十分明显，生物标志物参数随Ro的增大而增加或减小；高－过成熟阶段（Ro＞1．30％)所有煤样的生物标志物组成已基本趋于一致，而且和湖相泥岩的生物标志物特征相似，该阶段的生物标志物参数不能用来进行油源对比。     

Large-scale cooling towers as part of an efficient and cleaner energy generating technology

The present paper will outline the main aspects of the design and construction of cooling towers in Germany in the last decade. As part of electricity generating power plants, cooling towers play a significant role for the availability of reliable energy supplies, in a manner compatible with environmental requirements. They definitely belong to the largest and thinnest concrete structures at present. Because of the combined action of wind, thermal and moisture effects, special care has to be taken with regard to fatigue, cracking and corrosion to ensure an adequate level of safety and durability. Such a design strategy has been employed for the world’s tallest cooling tower at the Niederaussem power plant in Germany, with an overall height of 200 m and thickness values of 22–24 cm. Special considerations included the realistic non-axisymmetric distribution of soil characteristics, wind action due to interference effects (as determined by wind-tunnel tests), optimisation of the shell shape to improve structural and dynamic behaviour, injection of the cleaned flue-gas into the cooling tower, and the use of high-performance concrete (85 MPa) to improve shell resistance against acid attack by the cleaned flue-gas. The paper will present some results of an actual research project on this problem, which was conducted at the University of Wuppertal, to explore the use of high-performance concrete on design, stability and durability of cooling tower shells.     

长庆上古生界气层CO2增能压裂工艺

长庆上古气藏物性差,压力系数低,水锁伤害大,采用常规水力压裂,入井液返排困难,气井产量低。在储层改造地质研究的基础上,通过对CO2泡沫压裂技术进行室内攻关,引进开发了CO2泡沫压裂酸性交联技术,优化了CO2泡沫方案设计及现场施工工艺,配套了CO2增能压裂工艺技术。经过现场应用,充分说明了CO2增能压裂是一项行之有效的工艺技术,对于提高单井产量和长庆气田整体开发水平都是有益的。     

煤矸石高路堤下多孔拱涵顶进

介绍了国内首例煤矸石高路堤下顶进工程的施工     

机电一体化技术在综合采煤设备中的应用与发展

介绍了机电一体化技术在国内外煤矿井下综采设备中的应用，并论述了机电一体化技术发展与相关技术的研究。     

Comments on “Equivalence of characterizations of fixed models”

In this note we present a proof to the conjecture given in the above paper, and therefore establish the equivalence of characterizations of fixed modes for the general case.