Understanding source effects in ADHD rating scales: Reply to DuPaul (2003).

G. J. DuPaul (see record 2003-02033-012) offered two suggestions for additional research to understand the strong source effects reported by R. Gomez, G. L Burns, J. A. Walsh, and M. A. de Moura (see record 2003-02033-001) in attention-deficit/ hyperactivity disorder (ADHD) rating scales. The first suggestion was to determine whether the source effects represent mostly bias or accuracy. The second suggestion was to minimize source effects through the development of better ADHD rating scales. Because source effects can represent bias or accuracy, it is important to minimize the bias aspect through content validation procedures prior to attempts to determine whether source effects better reflect bias or accuracy. This comment offers various suggestions to reduce the bias in ADHD rating scales. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The benefits and costs of repeated memory tests for young and older adults.

Repeated and prolonged searches of memory can lead to an increase in how much is recalled, but they can also lead to memory errors. These 3 experiments addressed the costs and benefits of repeated and prolonged memory tests for both young and older adults. Participants saw and imagined pictures of objects, some of which were physically or conceptually similar, and then took a series of repeated or prolonged recall tests. Both young and older adults recalled more on later tests than on earlier ones, though the increase was less marked for older adults. In addition, despite recalling less than did young adults, older adults made more similarity-based source misattributions (i.e., claiming an imagined item was seen if it was physically or conceptually similar to a seen item). Similar patterns of fewer benefits and more costs for older adults were seen on both free and forced recall tests and on timed and self-paced tests. Findings are interpreted in terms of age-related differences in binding processes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

��չ����Ȼ��Ϊԭ�ϵ�ȼ�ϵ������

研究燃料汽车及其氢源系统是当今国内外能源工业与汽车工业的共同课题，而优选制氢能源则是这一课题的关键。章介绍了利用能源、经济、环境(EEE)——生命周期评估(LCA)这一综合评估方法，针对以天然气、煤或石油作为制氢能源的多种燃料电池氢源供应方式以及配套的燃料电池汽车系统，从经济性、能源利用效率和环境影响三个方面进行了生命周期清单分析和EEE综合评价。结果显示：天然气作为发展燃料电池汽车氢源的一次能源，具有氢制取技术路线多样化、经济上竞争力强、能源利用效率高和环境效益好等诸多优势，应为燃料电池汽车的首选制氢能源。对这一评估模型的敏感性分析显示，即使在天然气价格波动较大时，天然气制甲醇--甲醇车载重整车和天然气制氢--纯氢车这两个方案仍然最具优势。     

可再生能源在空调制冷中的应用

针对目前压缩式制冷技术带来的能源短缺和环境污染问题，介绍了几种可再生能源在空调制冷中的应用技术，如地道风供冷、地源热泵系统、太阳能空调制冷，分析了可再生能源用于空调制冷的特点及发展现状，并对其应用前景做了展望。     

铁水喷镁脱硫技术的应用

简述了涟钢铁水喷镁脱硫技术的设备概况、工艺流程和试生产情况。重点介绍处理过程的反应机理和控制方法，通过调整和改造，解决了钢水回硫的问题，实现了铁水脱硫-转炉-RH精炼炉-CSP的匹配。     

Properties of Graphite‐Strengthened Magnesium

Mg was dispersion‐strengthened with graphite by powder metallurgy. The material was produced by ball milling Mg micropowder (median particle diameter 40 μm) with 3 vol.‐% graphite powder (median particle diameter 1–2 μm). After 8 h ball milling the product was consolidated by hot extrusion. Structural analysis revealed that a submicrocrystalline structure developed during ball milling. Tensile tests showed that the material was brittle even up to 300 °C and, therefore, most mechanical tests were carried out under compression. Under those conditions the reinforced material showed yield stresses of 270 MPa at ambient temperature, 170 MPa at 150 °C, and 125 MPa at 300 °C. Mg processed under the same conditions, but without graphite addition, had significantly lower yield stresses. The dispersion‐strengthened Mg showed a marked increase in creep resistance: at 200 °C and a stress, σ_c, of 100 MPa, the secondary creep rate, ?_s, was in the lower 10^–9 s^–1 range and at 300 °C and σ_c of 80 MPa, ?_s values of up to 1 × 10^–8 s^–1 were measured. The results are discussed.     

Biosorption of heavy metals by Saccharomyces cerevisiae: Effects of nutrient conditions

Studies took place to investigate the effects of different nutrient conditions on the biosorption ability and selectivity of heavy metals by Saccharomyces cerevisiae. After having grown in media supplemented with additional glucose, ammonium, phosphate or cysteine, the yeast was exposed to an equimolar solution of lead, cadmium, zinc and copper. Lead removal from a mixed solution was significantly higher than that of copper, followed by zinc and cadmium. Generally, yeasts from cysteine-rich media showed greatest sorption capacity whereas phosphate addition influenced zinc selectivity. In addition, glucose, fructose and sucrose as carbon sources were examined. Cultures grown in glucose had a better uptake than those cultivated with fructose at an incubation time of 30 min.     

Accumulation and Mixing of Oils in Jinghu Sag of Subei Basin： Constraints from Thermal Maturity Parameters

Oils in Jinghu sag are abundant with high content of polar compounds and have a low ratio of saturate to aromatic hydrocarbons and a high ratio of resin to asphaltene. The gross composition of oils in the Jinghu sag suggests typical immature to low mature characteristics. Some compounds with low thermal stability were identified. Light hydrocarbons, a carbon preference index, an odd even index, n-alkane and hopane maturity parameters show mature features and little differences in the maturity level among oils. Sterane isomerization parameters indicate an immature to low mature status of oil. Transfer of the sedimentary center during sedimentation has led to different thermal histories among subsags and thus generated oils with different maturities. On the basis of source analyses, four migration and accumulation patterns with different maturity can be classified. Combined with available information on mergers of source, reservoir and long distance oil lateral migration, mixing conditions were present in the Jinghu sag. Experimental results indicate that maturity variations are caused by mixtures of hydrocarbons with different maturity.     

Potential of ground heat source systems

This paper presents a historical background of ground source heat pump technology, followed by a review of its current shortcomings. Based on these observations the author assesses the R&D needs and recommendations for future research.