台儿庄城区饮用水水源地水质放射性水平分析

为了解和掌握台儿庄城区饮用水水源地放射性水平和动态变化,本文以枣庄市生态环境局台儿庄分局提供的饮用水水源地水质放射性数据为基础,探讨了台儿庄城区饮用水水源地水质中α、β放射性质量浓度的动态变化。结果显示:水源地总α、β放射性质量浓度均低于标准限值,总α放射性质量浓度小于总β放射性质量浓度,总α、β放射性水平在水源地和季节变化中差异均不显著(P>0.05)。水源地水质总放射性水平符合我国规定的饮用水指导值。     

一种测量工业环境感应传导干扰的方法

针对采用干扰测量仪或频谱分析仪只能测量工业环境中干扰源的辐射干扰强度的问题,提出了一种测量工业环境感应传导干扰的方法。该方法采用HBYV非双绞2芯线作为干扰接收体,采用数字示波器记录干扰波形的最大幅值和单个脉冲的最大强度,通过与标准干扰发生器感应到HBYV非双绞2芯线上的干扰信号大小进行比较,确定干扰强度。以瞬变脉冲群干扰强度和浪涌干扰强度的测量为例,详细介绍了该方法的具体实现。     

开源自动化控制软件Sedona在物联网中的应用

通过讨论物联网的现状、关键技术及发展方向,主要介绍了一种开源自动化控制软件Sedona在物联网的应用技术,包括在物联网架构中如何进行软件开发和应用程序设计,并介绍了该架构的技术特点。Sedona语言是一种通用的面向组件化的编程语言。Sedona虚拟机是一个小型解析器,具有良好的移植性,内嵌多种通信协议,可以运行在任何基于IP通信的网络上。最终实现各设备之间集中控制、分散管理的目标。     

An enhanced,acoustic emission-based,single-fiber-composite test

In the single-fiber-composite (SFC) test, a fiber imbedded in a matrix is loaded in tension, resulting in a fragmentation of the fiber. In the conventional version of this test, the final fiber fragmentation length distribution is used with a micro-mechanical model to determine the average fiber/matrix interfacial shear stress. In the enhanced version of this test, one also determines the applied stress at each fiber fracture, and from this, one can evaluate the strength of the fiber at short gage lengths. In our measurement system, we utilize an acoustic emission (AE) technique to detect the fiber fractures and to locate the fiber breaks and so determine both the fiber failure stresses as well as the fiber fragmentation lengths while the test is in progress. Critical to the success of this test is a broadband AE system that utilizes point-like AE sensors, procedures for evaluatingin situ, the wavespeed of the first wave arrival and signal processing techniques for determining the arrival time of this signal as precisely as possible for a broad range of wave shapes. Here we describe the application of such an enhanced SFC test procedure to investigate the failure of a Nicalon fiber in an epoxy matrix.     

Stannate and permanganate conversion coatings on AZ31 magnesium alloy

The formation of stannate and permanganate–phosphate conversion coatings on AZ31 magnesium alloy was investigated in situ by EIS measurements and their protective performances were studied by different electrochemical techniques in diluted (0.05 M) sodium sulphate solution.The influence that short or long treatment times exert on the performances of such conversion coatings is discussed. While permanganate–phosphate baths always built layers characterized by penetrating cracks, long stannate baths produced layers without interconnected porosity, but were defective. This accounted for the initial greater protectiveness achieved with the stannate treatment; nevertheless, the easy penetration of the electrolytic solution through such a layer quickly decreased its corrosion resistance.     

大气生物气溶胶的源排放与源解析研究进展

2019年新冠肺炎(COVID-19)的全球爆发引起了公众对生物气溶胶的广泛关注。生物气溶胶是大气气溶胶的重要组成部分。生物气溶胶由于具有普通气溶胶的理化性质和本身特有的生物学特性,在全球生态系统、气候变化、空气质量和公共卫生等领域均扮演十分重要的角色。然而,目前学术界对生物气溶胶的研究主要集中在采样监测、消杀防护以及其环境与健康效应等方面,关于源特性研究相对滞后。基于此,聚焦大气中微生物的来源现状,综述了最近20年来生物气溶胶的自然源和人为源排放特性研究进展,并阐述了影响源排放和输送过程的主要因素(如生物地理区域、土地利用类型和环境因素等),探讨了当前生物气溶胶的各种源解析方法。最后,给出了生物气溶胶来源下一步的研究展望,以期为深入理解生物气溶胶的来源、输送与变化机理,更好地评估大气微生物污染水平与监控病原体的气溶胶传播提供参考。     

Activation of hydrogen storage materials in the Li–Mg–N–H system: Effect on storage properties

We investigate the thermodynamics, kinetics, and capacity of the hydrogen storage reaction: Li₂Mg(NH)₂ + 2H₂  Mg(NH₂)₂ + 2LiH. Starting with LiNH₂ and MgH₂, two distinct procedures have been previously proposed for activating samples to induce the reversible storage reaction. We clarify here the impact of these two activation procedures on the resulting capacity for the Li–Mg–N–H reaction. Additionally, we measure the temperature-dependent kinetic absorption data for this hydrogen storage system. Finally, our experiments confirm the previously reported formation enthalpy (ΔH), hydrogen capacity, and pressure–composition–isotherm (PCI) data, and suggest that this system represents a kinetically (but not thermodynamically) limited system for vehicular on-board storage applications.     

VCSTalk：基于DEA的开源软件开发人员效率评价工具*

介绍了VCSTalk的具体设计和实现架构,并展示了它用于评价若干开源软件项目中的开发人员效率的一个具体实例.     

Corrosion rate of magnesium and its alloys in buffered chloride solutions

The effect of the buffer capacity of test solution on the corrosion rate of cast pure (>99.95 mass%) and high-purity (>99.9999 mass%) magnesium, and AZ31 and AZ91E has been studied. Their corrosion rates were measured gravimetrically in a pH 6.5 and a pH 9 borate buffer including chloride ions, and in a conventional chloride solution. Except for the AZ91E in the pH 6.5, the corrosion rates of all the examined materials depended solely on the pH of the test solution, although the materials had a variety of purity and alloying elements. Higher buffer capacity probably masked the detrimental effect of the “cathodic impurities”. The corrosion rates measured in the buffers were considered as giving the resistivity of the passive film to anodic reactions. The high-purity magnesium had a fair corrosion resistance even in conventional chloride solution.     

铸态AZ80镁合金高温热变形行为研究

在Gleeble-1500热模拟机上对铸态AZ80镁合金在应变速率为0.005s-1~5s-1、变形温度为200℃~400℃条件下的高温热压缩变形行为进行了研究。结果表明,材料真应力-真应变曲线呈现动态再结晶特征。在温度T≥250℃,试样流变应力行为对应变速率敏感;在低温下T=200℃,应变速率对流变应力影响不大。高温下试样流变应力符合幂指数函数关系,应力指数n为6,热变形激活能Q为220kJ/mol。在高应变速率条件下,试样在变形中的温升是应变量的函数。实验中,Zener-Hollomon参数值大的试样温升明显,而Zener-Hollomon值小的试样变形温度基本保持不变。