Young’s modulus of crystalline C60 nanotubes studied by in situ transmission electron microscopy

Bending tests of crystalline nanotubes composed of fullerene C₆₀ molecules are performed inside a high-resolution transmission electron microscope. We fixed one side of a C₆₀ nanotube with a body-centered tetragonal structure with typical inner and outer diameters, i.e., 180 nm and 510 nm, respectively, and then applied concentrated forces on the other side using piezomanipulation of a silicon nanotip. The bending process was observed in situ by transmission electron microscopy with simultaneous measurements of the forces by an optical deflection method. It was found that the Young’s modulus of the nanotube was estimated to be 62–107 GPa, which was 1.1–3.3 times larger than that of C₆₀ nanowhiskers. The result concerning the increase in the Young’s modulus of the C₆₀ nanotube provided an experimental evidence for the structural model composed of an inner core and a surface shell for C₆₀ nanowhiskers.     

Calculation methods for comparing the performance of pure and mixed working fluids in heat pump applications

Three methods for comparing cycle performance of working fluids, pure as well as non-azeotropic mixtures, are investigated for two applications and for two mixture pairs, HCFC22-CFC114 and HCFC22-HCFC142b, and their pure components. The methods differ in the way of calculating the heat exchange processes. They assume, respectively, equal minimum approach temperatures, equal mean temperature differences and equal heat transfer areas. Changes of coefficient of performance (COP) with composition are explained for all methods. It is shown that transport properties must be taken into account when making rigorous comparisons between working fluids. To predict the relations between fluids with high accuracy, one must use the method with equal heat transfer areas. By the method with equal mean temperature differences, the COP can be estimated with the same accuracy for mixtures as for pure fluids, and can be used for rough estimations of the COP level with different fluids. The method of equal minimum approach temperatures should be avoided for non-azeotropic mixtures.     

Potential of ground heat source systems

This paper presents a historical background of ground source heat pump technology, followed by a review of its current shortcomings. Based on these observations the author assesses the R&D needs and recommendations for future research.     

Single-sided ventilation — Part II. further considerations

This paper extends an earlier report of measurements and computer predictions of flows in a cubical cavity exposed on one side to the scavenging effect of an external stream. Further measurements and photographs are presented; they are consistent with each other and with the predictions of the computational model. Specifically, comparisons are made between measured and predicted mean velocities and turbulent shear stresses, and photographs are used to elucidate features of the shear layers generated by accelerating and decelerating external flows. The computer model is used to deduce approximate relations between internal turbulent activity (measured by mean velocity, turbulence energy and shear stress) and external velocity, percentage ‘window’ opening and relative position of the plane walls upstream and downstream of the cavity.     

交流变频钻井泵试验台的研制

针对大功率、超高压（52MPa）钻井泵的试验问题，设计了采用交流变频控制技术，提高试验能力的试验台架。该试验台架体现了实用性、可操作性、高效节能、环保性；电气传动部分采用具有国际先进水平、成熟技术的交流变频调速系统，实现无级调速；机械传动部分采用单级双速变速箱，试验范围广；电控系统可完成对钻井泵各种参数在线监控和测定。     

压铸条件和淬火时效对GD—AlSi9Cu3合金力学性能的影响

通过改变压铸工艺参数和淬火时效，测定在静态载荷和动态循环载荷下ＧＤＡｌＳｉ９Ｃｕ３合金的力学性能和断裂力学性能，试验所获得的数据可用来估算压铸件的失效风险率     

Synthesis and characterization of mechanical-alloyed Ti–xMg alloys

The synthesis and characterization of Ti–xMg (x=4, 9, 12, 15, 21, 24 at%) alloys using mechanical alloying was investigated. A nanometer-sized Ti–24Mg alloy was produced. During mechanical alloying, the height of the XRD peaks of the Mg in the Ti–9Mg alloy decreased, and then disappeared, whereas the Ti XRD peaks broadened, and the grain size decreased with increasing milling time. The Mg firstly dissolved in the grain boundaries of the Ti, and then diffused into the Ti grain interiors. The grain boundaries played an important role in enhancing the solid solubility of Mg in Ti. With increasing Mg content the volume fraction of grain boundaries increased, and a decrease in grain size occurred after mechanical alloying for 48 h.     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

Degree of crosslinking and mechanical properties of crosslinked poly(vinyl alcohol) beads for use in solid-phase organic synthesis

The limited swellability in polar media of the commonly used polystyrene/divinylbenzene (PS-DVB) support materials for solid-phase organic synthesis has led to the development of novel, highly swellable hydrophilic gels designed for use in aqueous or polar media. Poly(vinyl alcohol) beads crosslinked with epichlorohydrin (PVA-EP) were prepared by a two-step inverse-suspension polymerization method. While it is known that the morphology of the resulting beads can be controlled by the ratio of EP versus PVA as well as by the pre-crosslinking time, the actual degree of crosslinking of the beads and their mechanical properties remain unknown. It is therefore the purpose of this study to evaluate the actual degree of crosslinking of beads prepared with different quantities of crosslinker in the feed by spectroscopic (Raman, nuclear magnetic resonance) and chemical (functional group loading) methods. The mechanical properties of these swollen PVA-EP beads will be evaluated by single-bead unconfined compression in solvents such as water, N,N-dimethylformamide (DMF), and tetrahydrofuran (THF) and compared to model PS-DVB beads commonly used for solid phase synthesis.