G.652光纤上的2.5Gbit／s色散受限系统

本文根据色散受限中继段长度的计算，对实际工程中１５５０ｎｍ波长２．５Ｇｂｉｔ／ｓ系统进行计算比较得出啁啾声引起的色散不容忽视，它使２．５Ｇｂｉｔ／ｓ成为色散受限系统。对１３１０ｎｍ波长６２２Ｍｂｉｔ／ｓ系统，当使用多纵模激光器时，往往也会成为色散受限系统。     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

G.652光纤长途传输系统的色散补偿

针对当前国内长途传输光缆系统在扩容过程中，因光信号色散而影响传输质量的现象，结合实际工程建设，分析了光信号色散的危害及其成因，并提出了相应的解决办法及建议。     

新产品——钢带增强聚乙烯螺旋波纹管

钢带增强聚乙烯螺旋波纹管是一种创新的埋地排水管,把钢材的高刚度、高强度和聚乙烯的柔韧、耐腐结合在一起,突出的优点是环刚度高和节约原材料.     

EXPERIMENTAL INVESTIGATIONS ON LONGITUDINAL DISPERSION CHARACTERISTICS OF TIDAL RIVERS

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＵｎｄｅｒｔｈｅｉｎｆｌｕｅｎｃｅｏｆｎａｔｕｒａｌｔｉｄｅｓ,ｔｈｅｉｎｔｅｒａｃ ｔｉｏｎｓｂｅｔｗｅｅｎｆｌｏｗｆｅａｔｕｒｅｓａｎｄｐｏｌｌｕｔａｎｔｌｏｎｇｉｔｕｄｉｎａｌｄｉｆｆｕｓｉｏｎｉｎｔｉｄａｌｒｉｖｅｒｓａｒｅｉｍｐｏｒｔａｎｔｆｏｒｗａｔｅｒｅｎｖｉ ｒｏｎｍｅｎｔｒｅｃｔｉｆｉｃａｔｉｏｎｉｎｅｓｔｕａｒｉｎｅｒｅｇｉｏｎｓ.Ｔｈｅｄｉｆｆｕ ｓｉｏｎａｎｄｔｒａｎｓｐｏｒｔｏｆｐｏｌｌｕｔａｎｔｉｎｎａｔｕｒａｌｒｉｖｅｒｓｆａｌｌｉｎ ｔｏｍ…     

ON AVERAGED DIFFUSION EQUATIONS

Methods of obtaining averaged diffusion equations are considered in case of non-uniform profile of the velocity in a channel. With the flow of Couette as an example, the comparison of exact and approximate solutions (obtained by means of perturbation method) has been carried out. The peculiarities of function of residence time distribution of liquid in the flows with non-uniform velocity field are noted. It is shown that the distribution function moments values including the zero and first moments values would depend on the degree of the velocity profile irregularity, on efficiency of radial mixing in a system as well as on the averaging method. The averaged diffusion equations which have been found by means of perturbation method are the most general of proposed ones at present in the appropriate literature. The Taylor's model and Goldstein's hyperbolic equations are included in said averaged equations as particular cases. The table of the numerical values of first three moments of RTD-function necessary for determining of the model parameters is given. The problems of application of the obtained averaged equation for calculating real chemical apparatuses, e.g. reactors, are discussed.     

Significance of fluid regime in biological filtration

A dispersed flow model previously developed to study substrate utilization in unsaturated media was experimentally verified and its practical application was considered. For this purpose, measurements were made using tap water and a synthetic feed solution. The importance of the change in fluid regime as regards to the simultaneous transport and reaction within biological filters were demonstrated. The effect of drop formation and the breakage of liquid jets inside the filters on substrate utilization was also shown.     

Influence of adsorption on the measurement of diffusion coefficients by Taylor dispersion

The effect of adsorption on the measurement of diffusion coefficients by the Taylor dispersion technique is investigated by modifying the governing equation to account for reversible, nonequilibrium adsorption. The resulting two-dimensional equations are solved by an explicit finite-difference technique. Experimental data for the acridine carbon dioxide system indicated that acridine adsorbs on the walls on the tubing and these data were investigated with this model. The influence of carious parameters including the number of sites and the rates of adsorption desorption was investigated by conducting a parametric sensitivity analysis on the model. It was found that adsorption of the solute on the wall of the tubing could produce an error as high as 35% on the measured diffusion coefficient compared to the actual diffusion coellicient. Examination of the influence of each of the parameters will enable Inure investigators to reduce the effect of adsorption in the measurement of diffusion coefficients by Taylor dispersion.