大学城的衍沿与指谓

20世纪中叶以后，西方国家相率兴起一批以大学为主体、以城市为依托、以资源共享功能互补和产学研一体化为主要目标的新兴城市，并演绎为自然发展型和规划建设型两种典型的现代大学城模式。国内大学城的建设较之国外虽晚近了约四十年，但自上个世纪90年代中叶以后发展势头日积。大学城的诞生，既改变了城市的产业结构，提升了城市的文化品位，强化了城市的教育功能，同时也促进了大学自身的发展，并构成了独具特质的新的城市发展走廊。     

基于演化算法的奇偶校验器自动设计*

基于演化算法技术,提出一种新的设计思想,实现奇偶校验器的电路自动设计.实验证明,多目标演化算法具有较少的运算量和较高的效率,能自动设计出使用逻辑门数更少、延时更小的奇偶校验器.     

多样性制导分段进化的基因表达式编程

为了解决基于传统基因表达式编程（GEP）的函数挖掘及其改进算法仍然存在局部优化的缺陷这一问题,提出了以基因组多样性制导的分阶段进化挖掘算法DGGEP。给出了GEP 进化阶段和基因组多样性评估模式的定义;提出了描述进化阶段的进化因子概念和分阶段进化策略;采用动态遗传算子设计和群体规模控制方法,使进化更快速跳出局部最优。实验表明了新算法的有效性,能减少进化停滞代数65％以上,使群体的平均适应度提高12%以上。     

多孔普鲁士蓝类似物的合成及电催化析氧性能

采用一种简单易行的共沉淀法合成了前驱体镍铁普鲁士蓝类似物NiFe-PBA（NF）,然后通过溶剂热处理获得了镍铁普鲁士蓝纳米多孔材料（NFP）。通过XRD、SEM、TEM、XPS、BET及电化学方法对所得材料进行了结构表征和析氧性能测试。结果表明,NFP相对于前驱体NF,电化学比表面积增大、催化活性位点增多,电催化析氧反应（OER）性能显著提高。在浓度1 mol/L KOH水溶液中,达到10 mA/cm2电流密度时,NFP所需过电位仅为260 mV,比NF（320 mV）前驱体低18.75%,也优于大多数已报道的非贵金属催化剂和商用贵金属催化剂,显示出良好的应用前景。     

Microstructure evolution of cold-sprayed coating during deposition and through post-spraying heat treatment

The microstructural features of cold-sprayed coatings were investigated using Cu, Ti and Zn feedstocks by optical microscopy, scanning electron microscopy and transmission electron microscopy to reveal the microstructure evolution mechanisms in cold spray. Four typical effects including tamping, refinement, impact-induced fusion and annealing were examined on microstrueture. It is found that the microstructure of cold spray coating is remarkably influenced by spray materials. Ti coatings consist of evident porous layer and Cu coatings present a limited porous layer only near the surface. It is clear that the successive tamping effect and dynamic refinement of grains significantly influence the microstructure evolution of cold-sprayed coating. The tamping effect leads to the densification of porous coating layer gradually and the refinement effect leads to the formation of fine microstructure. It is considered that the large difference in the formation of porous layer is attributed to the dynamic impact pressure and hardenability of materials. It is also found that the impact-induced fusion during deposition of Zn coating can also modify the interfacial microstructure between particles in cold spray coating. Moreover, the nanocrystalline phase can be formed at the interfaces among particles resulting from the localized melting of the interfaces and tamping effect. Furthermore, the annealing treatment can modify the microstructure and property of a cold-sprayed coating.     

Modelling of plastic flow, heat transfer and microstructural evolution during rolling of eutectoid steel rods

A study was undertaken in an attempt to quantitatively describe the rolling process of eutectoid steel rods. Finite element method was employed to model plastic flow and heat transfer in the deformed material, and heat transfer during cooling to ambient temperature. The numerical calculation gave an assessment of the strain, strain rate and temperature distributions in the work piece. This allowed the prediction of the austenite microstructure evolution during the process. Finally, the relationships describing the microstructure-mechanical properties were used to quantitatively characterize the influence of processing parameters on strength of rods after rolling.     

CORDIS无机粘结剂的特性与试验

介绍了德国HA公司最新研制的CORDIS无机粘结剂的组成与性能以及应用中的问题。     

次亚磷酸盐溶液电镀三价铬工艺的电化学

研究了次亚磷酸盐溶液电镀三价铬工艺的溶液化学性质，对镀液中三价铬离子与次亚磷酸根离子的配位化合物进行了探讨。用线性电势扫描法、循环伏安法研究了镀液的电化学特征及镀液中氟离子、次亚磷酸根离子、溶液ｐＨ值对阴极析氢反应的影响。讨论了获得最佳电流效率的条件     

偏晶合金液-液相变过程模拟

建立了能描述在弥散相液滴形核、扩散长大、碰撞凝并及两液相空间分离等因素共同作用下，偏晶合金液-液相变过程中组织演变过程的数学模型。将计算的温度场和浓度场与控制凝固组织演变的动力学方程相耦合，模拟研究了单向冷却条件下Al-Pb合金液-液相变过程中的组织演变过程。结果表明，随着冷却的进行，液-液相变区不断由试样底部向试样顶部推进，直至贯穿整个试样。由于在凝固过程中弥散相液滴进行Marangoni迁移和Stokes运动，试样中的某些部位会出现液滴贫化、过饱和度增加和多次形核现象。