Sensitizing Effect of Mixed Surfactants on the Colouration of Scandium(Ⅲ)with Phenylfluorone or Its Derivatives

In the presence of mixed micelle of a cationic and a nonionic surfactants,the reaction of scandium(Ⅲ)with phenylfluorone or its derivatives results in a very sensitive colouration:furthermore this chromophoricsystem tolerates the existence of a considerable amount of masking agents,so that many interfering ions can bemasked and its selectivity would be further improved.After studying the optimum conditions and main charac-ters of some similar systems,the system of Sc(Ⅲ)—Orthonitrophenyuorone—CetyltrimethylammoniumBromide(CTMAB)—Triton X-200 is chosen for the spectrophotometric determination of microamount ofscandium.The proposed method shows not only high sensitivity(with a molar absorptivity of 2.12×1~sLmol~(-1)·cm~(-1))and selectivity,but also high tolerance of chromophoric conditions.Beer's law is obeyed over arange of 0～6.0 μg Sc/25ml.If the dual-wavelength method is applied,a much higher molar absorptivity o|"3.04×10~5L·mol~(-1)·cm~(-1)than those of other systems ever reported in the literatures can be attained:more-over.its linear range is extended to 0～8.0 μg Sc/25ml and its reproducibility is also improved.     

混合溶剂对Ru(Ⅳ)萃取的研究

一、前言 在一定浓度盐酸介质中,Ru(Ⅳ)以RuCl_6~(2-)络阴离子状态存在,可被C类溶剂TOA(三辛胺)以离子缔合机制定量地萃入有机相。由实验得到在相同条件下,TOA对Ru(Ⅳ)的萃取率随稀释剂介电常数的增加而下降。     

The Interaction of Glymes with Surfactant Micelles

The critical micelle concentrations (CMC) values and counterion dissociation (α values) have been determined for a number of mixed micellar systems consisting of two typical ionic surfactants and glycol ethers (glymes) as cosurfactants, namely diethylene glycol dimethyl ether, diethylene glycol diethyl ether, triethylene glycol dimethyl ether, and tetraethylene glycol dimethyl ether. Conductance experiments were used to determine the CMC and α values of the mixed micelles as a function of glyme concentration in the aqueous mixed solvent. Favorable interactions between sodium dodecyl sulfate micelles and glyme cosurfactants were deduced from the decreases in the CMC values and the large increase in the α values of these systems as a function of increasing glyme concentration in the mixed solvents. In contrast to the anionic surfactant/glyme systems, in general, there appeared to be little favorable interactions between the surfactant and glymes when micelles of the cationic surfactant dodecyltrimethylammonium bromide were formed in water/glyme solvent systems containing an increasing amount of the glymes. The interaction of glymes with the surfactant micelles was examined closely via ¹³C nuclear magnetic resonance (NMR) chemical shifts for both surfactant and glyme carbons; these chemical shifts changes were interpreted in terms of the distribution and the localization of the glymes in the aggregates. Finally, partition constants, determined from two-dimensional diffusion-oriented spectroscopy (2D-DOSY) experiments, were used to calculate thermodynamic quantities of transfer of the glymes between the bulk phase and the self-assembled aggregates. All these results are interpreted in terms of the key contributions that both the glyme ethoxylated groups and alkyl endgroups make to the hydrophobic interactions.     

EFFECT OF SUSPENDED FIBRES ON MACRO-MIXING AND MICRO-MIXING IN A STIRRED TANK REACTOR

The effects of suspended fibre on macroscale and microscale mixing in a small stirred tank reactor were studied under batch conditions using the competitive, consecutive azo coupling between 1-naphthol and diazotized sulfanilic acid. The mixing quality was determined from the distribution between the mono and bis substituted reaction products. Nylon (2 and 3 millimeters in length) and fully bleached softwood kraft pulp (FBK) fibre suspensions were examined at volumetric concentrations up to the limit that complete suspension motion could be maintained in the vessel at impellet rotational speeds of 7 and 10s^-1. The adsorption of the product dyes on the fibre was found to be proportional or very nearly proportional to their concentrations in the aqueous phase and did not interfere with the assessment of mixing in the suspension.

Suspended fibres were found to slightly increase the 'critical feed time' of the diazotized sulfanilic acid, corresponding to an increase in the macromixing or bulk blend lime of the vessel. Continued increase in the fibre concentration led to the formation of a well mixed cavern centered on the impeller and the creation of stagnant regions adjacent to the vessel walls. The departure from the Newtonian fibre-free case is due to changes in the flow through and distribution of the energy dissipative regions in the vessel. The most effective location for chemical addition to ensure good microscale mixing remains in the impeller vicinity.     

锰离子掺杂对PZT-BCW压电陶瓷性能的影响

本文制备了锰离子掺杂的0．9SPZT-0．05Ba(Cu1／2W1／2)O3压电陶瓷，并对该压电陶瓷进行了XRD、SEM和微区成分分析。结果表明材料为钙钛矿结构，掺锰后材料的晶粒变大．但是该压电陶瓷的机械品质因数Qm大幅度提高，由60提高到490。     

基于回归模型的CPU超频仿真软件设计

为了帮助认识CPU超频问题并熟悉超频设置操作,进行CPU超频仿真软件设计的全面研究。分析CPU超频的影响因素,介绍超频的方法和操作流程;讨论软件的功能模块结构、模块的运行流程和样本数据的存储方法;重点研究CPU超频后的性能测试结果估计问题,并为此提出了建立回归模型的解决之道;详细探讨了VB.NET与Matlab混合编程的接口与实现途径,并以此种方式完成了程序代码的编写。试用表明,该软件功能完整、界面直观、使用简便,能够为理解超频理论和熟悉超频操作提供有效帮助。     

基于弹性网格混合特征的脱机手写维文识别

手写体维文识别技术的关键在于特征提取方法的选择。为探求一种可靠性高、可分性强的脱机手写维文特征提取方法,在分析现有方法的基础上,结合维吾尔文字词自身的特点,提出一种在局部特征上基于弹性网格区域笔划密度、方向分解特征,在全局特征上提取交叉点、环、弧形笔划、附加笔划、外围轮廓特征的混合特征提取方法。通过在IFN/ENIT标准数据库及自采样数据集的聚类分析实验,识别正确率分别达到85%、84.3%。结果表明,方法综合统计特征和结构特征提取的优点,具有较强的抗扰能力,可分性优于GSC法。     

提高丙烯和混合碳四产品收率的对策与措施

中国石油化工股份有限公司茂名分公司化工事业部乙烯装置随着运行周期的延长，高低压脱丙烷塔和脱丁烷塔结垢严重，分离效果变差，造成丙烯和混合碳四产品的收率降低。通过分析丙烯和混合碳四产品损失大、收率低的原因，提出对策并采取相应措施，从而有效地提高了丙烯和混合碳四产品的收率。     

Three-dimensional simulation using fixed coarse-grid thermal-fluid scheme and conduction heat transfer scheme in distinct element method

Three-dimensional simulation using particle-thermal-fluid coupling scheme with a mixed Lagrangian-Eulerian approach is presented and the scheme is described by extending author's previous research [Y. Shimizu, 2004. “Fluid Coupling in PFC2D and PFC3D”, numerical modeling in micromechanics via particle methods—2004, Proceeding of 2nd International PFC Conference, Balkema, 2004, pp. 281-287]. The scheme solves the continuity, Navier-Stokes (N-S) and thermal energy equations numerically in Eulerian Cartesian coordinates, then derives pressure, velocity vectors and temperature for each fixed cell by considering particle existence. On the other hand, driving forces and thermal energy from fluid are applied to the particles as external body forces and a source term in the force-displacement law and the heat transfer calculations, respectively. This paper describes the thermal scheme for both fluid and particles. Results of two- and three-dimensional simulations involving forced convective heat transfer by fluid and conduction heat transfer within particles are presented.