甲壳质及其衍生物的制备与应用

甲壳质是一种丰富的天然资源。近年来，甲壳质及其衍生物的开发应用受到国内外的重视，越来越多的产品将从实验室走向市场，本文介绍了甲壳质及其衍生物的制备方法及其在工业、农业、医药、环保、生物学等领域的应用。     

基于带约束人工蜂群算法和平均Hausdorff距离的重力匹配方法

重力匹配算法是实现重力辅助惯性导航系统的关键技术之一。但是,传统重力匹配方法存在复杂度高、应用范围小等缺陷,一般很难实现精确、快速匹配的效果。将人工蜂群算法用于重力匹配的搜索过程,并将多普勒测速仪提供的速度信息作为限制条件对蜂群搜索过程进行约束。在此基础上,利用平均Hausdorff距离对匹配结果进行筛选,在重力数据库中重力异常精度一定的条件下,可降低误配率。仿真结果表明,该匹配算法在重力特征显著的区域具有较高的匹配率,可以达到精确、快速的匹配定位,从而实现重力辅助导航。     

Interpolymer complex microparticles based on polymethacrylic acid‐chitosan for oral insulin delivery

In the present study, microparticles composed of polymethacrylic acid‐chitosan (PMAA‐CS) were prepared by a novel interionic gelation method. Free‐radical polymerization of methacrylic acid was carried out in the presence of CS, using a water‐soluble initiator, and application of these microparticles toward oral insulin delivery was evaluated. Microparticles obtained were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) studies. From SEM studies, it was observed that microparticles had an aggregated morphology with size ～20 μm, while FTIR confirmed the presence of ionic interaction between PMAA and CS chains. Protein loading was done by diffusion filling method, and from in vitro release study, it was observed that insulin‐loaded microparticles displayed a pH depended release profile at alkaline/acidic pH. Microparticles exhibited sustained release of insulin for 3–4 h at neutral pH, and enzyme linked immunosorbent assay (ELISA) proved that encapsulated protein maintained 100% biological activity at neutral pH. Preliminary study suggests that these microparticles can serve as good candidate for oral protein delivery. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 506–512, 2006     

Influence of chitosan characteristics on coagulation and flocculation of organic suspensions

Several samples of chitosan with different degrees of deacetylation and of different molecular weights were tested for the coagulation–flocculation of organic suspensions. Organic suspensions were prepared by mixing mushroom powder with tap water. Experiments were carried out at pH 5, pH 7, and pH 9. Because decreasing the pH reduced the amount of chitosan required to reach the required turbidity, at pH 9, a high concentration of chitosan was required to achieve the required treatment levels, whereas the difference was less significant between pH 7 and pH 5 (the required concentration of chitosan was halved). Though viscosity, correlated to the molecular weight of chitosan, affected treatment performance, its influence on the efficiency of coagulation–flocculation could be substantially reduced by slightly increasing the concentration of the polymer. This is of importance in the processing of industrial effluents: the aging of a chitosan solution, which may cause partial depolymerization, and loss of viscosity, will have a limited impact on process efficiency. The degree of deacetylation also has a limited effect on treatment performance, especially when the degree of deacetylation exceeds 90%. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2070–2079, 2005     

Modification of glassy carbon electrode with multi-walled carbon nanotubes and iron(III)-porphyrin film: Application to chlorate, bromate and iodate detection

In this study, multi-wall carbon nanotubes (MWCTs) is evaluated as a transducer, stabilizer and immobilization matrix for the construction of amperometric sensor based on iron-porphyrin. 5,10,15,20-Tetraphenyl-21H,23H-porphine iron(III) chloride (Fe(III)P) adsorbed on MWCNTs immobilized on the surface of glassy carbon electrode. Cyclic voltammograms of the Fe(III)P-incorporated-MWCNTs indicate a pair of well-defined and nearly reversible redox couple with surface confined characteristics at wide pH range (2-12). The surface coverage (Γ) and charge transfer rate constant (k_s) of Fe(III)P immobilized on MWCNTs were 7.68 × 10⁻⁹ mol cm⁻² and 1.8 s⁻¹, respectively, indicating high loading ability of MWCNTs for Fe(III)P and great facilitation of the electron transfer between Fe(III)P and carbon nanotubes immobilized on the electrode surface. Modified electrodes exhibit excellent electrocatalytic activity toward reduction of ClO₃⁻, IO₃⁻ and BrO₃⁻ in acidic solutions. The catalytic rate constants for catalytic reduction of bromate, chlorate and iodate were 6.8 × 10³, 7.4 × 10³ and 4.8 × 10² M⁻¹ s⁻¹, respectively. The hydrodynamic amperometry of rotating-modified electrode at constant potential versus reference electrode was used for detection of bromate, chlorate and iodate. The detection limit, linear calibration range and sensitivity for chlorate, bromate and iodate detections were 0.5 μM, 2 μM to 1 mM, 8.4 nA/μM, 0.6 μM, 2 μM to 0.15 mM, 11 nA/μM, and 2.5 μM, 10 μM to 4 mM and 1.5 nA/μM, respectively. Excellent electrochemical reversibility of the redox couple, good reproducibility, high stability, low detection limit, long life time, fast amperometric response time, wide linear concentration range, technical simplicity and possibility of rapid preparation are great advantages of this sensor. The obtained results show promising practical application of the Fe(III)P-MWCNTs-modified electrode as an amperometric sensor for chlorate, iodate and bromate detections.     

Removal of Cd(II), Hg(II), and Pb(II) ions from aqueous solution using p(HEMA/chitosan) membranes

An interpenetration network (IPN) was synthesized from 2‐hydroxyethyl methacrylate (HEMA) and chitosan, p(HEMA/chitosan) via UV‐initiated photo‐polymerization. The selectivity to different heavy metal ions viz Cd(II), Pb(II), and Hg(II) to the IPN membrane has been investigated from aqueous solution using bare pHEMA membrane as a control system. Removal efficiency of metal ions from aqueous solution using the IPN membranes increased with increasing chitosan content and initial metal ions concentrations, and the equilibrium time was reached within 60 min. Adsorption of all the tested heavy metal ions on the IPN membranes was found to be pH dependent and maximum adsorption was obtained at pH 5.0. The maximum adsorption capacities of the IPN membrane for Cd(II), Pb(II), and Hg(II) were 0.063, 0.179, and 0.197 mmol/g membrane, respectively. The adsorption of the Cd(II), Hg(II), and Pb(II) metal ions on the bare pHEMA membrane was not significant. When the heavy metal ions were in competition, the amounts of adsorbed metal ions were found to be 0.035 mmol/g for Cd(II), 0.074 mmol/g for Hg(II), and 0.153 mmol/g for Pb(II), the IPN membrane is significantly selective for Pb(II) ions. The stability constants of IPN membrane–metal ions complexes were calculated by the method of Ruzic. The results obtained from the kinetics and isotherm studies showed that the experimental data for the removal of heavy metal ions were well described with the second‐order kinetic equations and the Langmuir isotherm model. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation and characterization of novel semi‐interpenetrating 2‐hydroxyethyl methacrylate‐g‐chitosan copolymeric microspheres for sustained release of indomethacin

A novel semi‐interpenetrating (semi‐IPN) graft copolymer of 2‐hydroxyethyl methacrylate (HEMA) with chitosan (CS) has been prepared in the form of microspheres, using water‐in‐oil (W/O) emulsion technique. Microspheres were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X‐ray diffractometry (X‐RD) to confirm the crosslinking and polymorphism of indomethacin (IDM). The X‐RD and DSC techniques indicated a molecular‐level dispersion of IDM in the IPN matrix. Scanning electron micrographs (SEM) taken at the cross section of the microspheres have shown rough surfaces around the microspheres. The sustained release characteristics of the matrices for IDM, an anti‐inflammatory drug, were investigated in pH 7.4 media. Particle size and size distribution of the microspheres were studied by laser light diffraction particle size analyzer. The drug was released in a sustained manner for up to 12 h. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

壳聚糖渗透汽化膜分离醇／水的性能：Ⅱ.壳聚糖复合膜

用聚丙烯腈超滤膜为基膜制成的ＣＳ复合膜，对乙醇／水溶液的分离具有较稳定的透过性，复合膜先后运行于低浓度的乙醇溶液的９５ｗｔ％乙醇溶液，膜的稳定性能优于均质膜。实验还表明用多种交联剂代替硫酸处理超薄复合膜，可有效地提高膜的渗透选择性。     

Blend membranes of chitosan and poly(vinyl alcohol) in pervaporation dehydration of isopropanol and tetrahydrofuran

Blend membranes of a natural polymer, chitosan, with a synthetic polymer, poly(vinyl alcohol) (PVA), were prepared by solution casting and crosslinked with a urea formaldehyde/sulfuric acid (UFS) mixture. Chitosan was used as the base component in the blend system, whereas PVA concentration was varied from 20 to 60 wt %. Blend compatibility was studied by differential scanning calorimetry, and Fourier transform infrared spectroscopy was used to study membrane crosslinking. Membranes were tested for pervaporation dehydration of isopropanol and tetrahydrofuran (THF) at 30°C in close proximity to their azeotropic compositions. Membrane performance was assessed by calculating flux and selectivity. Swelling experiments performed in water + organic mixtures at 30°C were used to explain the pervaporation results. The blend membrane containing 20 wt % PVA when tested for 5 and 10 wt % water–containing THF and isopropanol feeds exhibited selectivity of 4203 and 17,991, respectively. Flux increased with increasing concentration of water in the feed. Selectivity was highest for the 20 wt % PVA‐containing blend membrane. The results of this study are unique in the sense that the crosslinking agent used—the UFS mixture—was novel. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1918–1926, 2007