钛合金表面双层辉光离子渗铝的研究

利用双层辉光渗金属技术，以铝为源极、TC4(Ti-6Al-4V)为阴极、氩气为工作气体，依靠辉光放电和不等电位空心阴极效应在TC4表面形成合金层。采用X射线衍射和辉光放电光谱分析了合金层的相组成及渗层内Al元素的分布．并对其进行硬度测试。结果表明：渗层由Ti3Al和α-Ti组成；铝的含量可达18％；渗层厚度可达13μm；其硬度比经渗铝处理后的有了较大程度的提高。     

拉深模CAD系统的研究与建立

对宽凸缘筒形件拉深模工序设计中的关键问题进行了详尽的讨论，给出设计优化的拉深工序的思路，并对拉深模CAD系统的开发进行了讨论。在输入相关参数后，拉深模CAD系统可完成拉深模的设计并绘出实体图，显著提高了设计质量和效率。     

Ti_3Al基合金(0001)_(α_2)//(110)_β界面价电子结构分析

基于固体与分子经验电子理论,以改进的TFD理论提出的电子密度连续的量子力学条件为判据,计算了Ti3Al基合金中(0001)α//(110)β2界面的价电子结构。对比分析了单相Ti3Al基合金2-Ti3Al2-(Ti)Al(0001)//(0001)ααxMy界面与多相Ti3Al基合金(0001)α2-Ti3Al//(110)β-Ti0.5xAl0.5M0.5y,(0001)α2-(TixMy)Al//(110)β-Ti0.5xAl0.5M0.5y界面电子结构。从电子结构层次上初步解释了延性β相改善合金薄弱的相界面电子结构与键结合,增加界面稳定性与连续性,提高合金强韧性的微观本质。     

基于Automation技术在AutoCAD中实现数控加工的三维仿真

介绍了AutoCAD的三维功能、ActiveX Automation技术和AutoCAD的对象模型，讨论了在VB6．0中调用AutoCAD进行数控加工三维仿真的思路和实现方法，并给出铣凸轮加工的实例。     

流动条件下炔氧甲基季胺盐的缓蚀性能研究

利用交流阻抗(EIS)、线性极化、动电位极化和失重法，研究了炔氧甲基季胺盐对N80在常温CO2饱和的3％NaCl溶液中的电化学行为和缓蚀性能的影响．结果表明：空白溶液中N80的累计失重在4m／s以后急剧增大，即介质的临界流速为4～5m／s．动态下炔氧甲基季胺盐存在与静态下相同的浓度极值现象，流速低于5m／s时缓蚀剂的极值浓度与静态时相同，都为150mg／L，而流速高于5m／s后极值浓度有所增加．     

Studies concerning the effect of nitrogen on the oxidation behavior of TiAl-based intermetallics at 900°C

The oxidation behavior of the titanium aluminides Ti-50Al and Ti-48Al-5Nb has been investigated in Ar+20%O₂ and in air at 900°C. Thermogravimetric studies in combination with structural analyses using optical metallography, SEM/EDX and X-ray diffraction show a marked influence of nitrogen on the composition and growth rate of the oxide scales. For a more detailed study concerning the effect of nitrogen on the scale-growth kinetics, thermogravimetrical analyses were carried out during which the gas atmosphere was changed from air to Ar–O₂, and vice versa, without intermediate cooling of the specimen. The results show, that nitrogen adversely affects the formation of the initially formed alumina scale and that it enhances the growth rate of the rapidly growing Ti-rich oxide. This effect was observed in both alloys investigated, although the thermogravimetric results at first sight indicated an opposite effect for the Nb-containing alloy. This apparent contradiction is caused by internal oxidation which occurs in this alloy during exposure in Ar–O₂.     

INFLUENCE OF Al ON DUCTILITY IMPROVEMENT BY B IN Ni_3Al ALLOYS

The “order-disorder” model was adopted to calculate the lattice vacancies related to the com- position change in Ni_3Al alloys.A great deal of vacancies,i.e.,the non-stoichiometric vacan- cies,may exist in the Ni_3Al alloys containing Al over stoichiometry,i.e.25 at.-%.This was confirmed by the positron annihilation technique.Therefore,the influence of Al content on the enhancing behaviour of B towards the ductility of Ni_3Al alloys can be understood by the interaction of non-stoiehiometric vacancies and B atoms.     

High temperature oxidation of a (Cr2N−Mo2S3)/Cr double-layered coating deposited on steel by D.C. magnetron sputtering

A coating consisting of (Cr₂N−Mo₂S₃) overlay coating and an underlying Cr coating was deposited on a steel substrate by D.C. magnetron sputtering. The oxidation characteristics of the deposited double-layered coating were studied at temperatures ranging from 400 to 900 °C in air. The oxidation product was primarily Cr₂O₃. The unreacted coating beneath the oxide scale had some dissolved oxygen, sulfur, and iron. Oxidation of the coating occurred via complex routes such as the outward diffusion of chromium and nitrogen from Cr₂N and iron from the substrate, and the inward transport of oxygen from air, chromium from Cr₂N, and S from Mo₂S₃. This counter diffusion of various ions occurred easily via fine crystallites that constituted the coating, which had some solubility of S, O, and Fe.     

电沉积法制备Ni-Ti3SiC2复合镀层

以自制纯度超过98%(体积分数,下同)的Ti3SiC2陶瓷粉体为原料,加入分散剂和表面改性剂,制成稳定悬浮液,并加入Watts镀镍电镀液,利用磁力搅拌分散均匀,在阴极电流密度2 A/dm2～5 A/dm2下,在低碳钢基体表面成功得到Ni-Ti3SiC2减摩复合镀层.SEM观察表明,表面改性剂的加入有效地改变了粉体表面电导性质,得到致密平整的复合镀层结构.XRD及EDS分析表明:镀层中Ti3SiC2微粒含量为5%～14%(体积分数,下同).当制备过程中以间歇式搅拌代替连续搅拌时,可得到Ti3SiC2相含量超过30%的复合镀层.复合镀层的显微硬度随微粒含量的升高而增大.     

纳米晶Bi2Se3-Sb2Se3薄膜的SILAR法制备及表征

采用连续离子层吸附反应(SILAR)法,分别用含有Se2-,Bi3+和Sb3+的离子溶液作为独立的阴、阳离子前驱溶液,以载玻片为衬底,在室温下沉积出致密且具有镜面金属光泽的Bi2Se3-Sb2Se3薄膜材料.为了改善薄膜样品的结晶状态,对其进行了退火处理.用AFM观察了薄膜样品的表面形貌,用XRD分析了退火前后薄膜样品的结晶状态.结果表明薄膜样品经200℃较低温度下退火处理4 h以后,薄膜的结晶状态由无定形态转化为多晶态,其平均晶粒尺寸为30 nm～40 nm.