铝电解槽TiB2涂层阴极技术

将含有ＴｉＢ２、碳纤维和热固性粘结剂的涂料，涂敷到铝电解槽的阴极基体上，制备出可润湿的阴极表面。经固化和碳化后，涂层和碳质基体材料的粘结力强，热膨胀匹配性好。每台硼化钛涂层阴极试验槽能节省ＮａＦ２５０～３００ｋｇ，试验槽的电流效率高出对比槽１．４４％，能耗降低１７５～２１１ｋＷ·ｈ／ｔＡ     

Electrocatalysis of oxygen reduction on a carbon supported platinum-vanadium alloy in polymer electrolyte fuel cells

The electrocatalysis of the oxygen reduction reaction (ORR) on carbon supported Pt:V 1:1 catalyst in polymer electrolyte fuel cells (PEFC) was investigated. At an oxygen pressure of 1 atm results indicate a lower electrocatalytic activity for the ORR in the presence of vanadium. However, at an O₂ pressure ≥2 atm an enhanced electrocatalytic property of PtV/C compared with Pt/C is revealed. This result indicates the occurrence of a different electrocatalytic mechanism for the ORR on Pt/C and PtV/C. An increase of mass transport overpotentials is observed for the PtV/C catalyst, and this was related to the presence of vanadium oxide. Indeed, XRD analysis revealed that only about 30% of V present in the catalyst is alloyed with Pt, forming a face centred cubic (fcc) Pt₃V solid solution. A thermal treatment at 850 °C under reducing atmosphere leads to the formation of an ordered fcc Pt₂V phase. After this, the ORR activity of PtV/C at O₂ pressure 1 atm is higher than that of Pt/C.     

Internally humidified polymer electrolyte fuel cells using water absorbing sponge

Polymer electrolyte fuel cell (PEFC) mounted with two strips of polyvinyl alcohol (PVA) sponge is presented and the effect of operating conditions on the cell performance is investigated. Mounting the sponge wicks is advantageous for the humidification of dry inlet air and for the removal of liquid water in the cell. It was found that dry inlet hydrogen could be internally humidified by water diffusion from the cathode to anode when operating in a counterflow mode. The results show that the relative humidity of the inlet gases could have little effect on the performance of the cell mounted with two sponge wicks under certain operating conditions. At a cell potential of 0.5 V, the current densities of the sponge-mounted PEFC operated with dry air are 5% and 31% higher than those of the conventional one without wicks operated with saturated and dry air, respectively. The molar percentage of water vapor to total water exiting the cathode (R_gas) is an important parameter to gauge the cell performance with dry gases. A very large R_gas may cause the membrane dehydration and subsequently a low cell performance.     

Simulation studies on the fuel electrode of a H2---O2 polymer electrolyte fuel cell

The macro-homogeneous porous electrode theory is used to develop a model which describes the catalyst layer of the hydrogen electrode formed by catalyst particles that are bonded to the membrane. The water transport in the catalyst layer and polymer electrolyte membrane is considered. The effects of catalyst layer structure parameters such as polymer volume fraction, catalyst layer thickness, platinum loading and reactant gas humidity as well as CO poison on the hydrogen electrode behavior are examined. The results show that the catalyst layer thickness has a significant effect on the electrode performance. A thicker catalyst layer will result in a larger ohmic voltage loss and higher catalyst cost. The optimal polymer volume fraction and catalyst layer thickness are 0.5 and 1.5–4 μm, respectively, for this electrode. An optimal platinum surface coverage on carbon need not exceed 20% (20 wt% Pt/C). Larger platinum coverage will increase the cost, but only slightly enhance the electrode performance.     

共轭聚合物／C60复合体系及其在光伏打电池中的应用

共轭聚合物／C60复合体系在有机太阳能电池中的应用引起了化学工作者的广泛兴趣。本文介绍了共轭聚合物／C60复合体系的光诱导电子转移，以及近年来该体系在光伏打电池中的研究进展。     

High Density Culture of Porphyridium cruentum in a 42 L Internal Airlift Loop Photobioreactor

1 INTRODUCTION Porphyridium cruentum is a kind of unicellular microalgae, which can live widely in freshwater, marine, brackish, and soil environment[1]. Great attention has been paid to its potential economic value such as the high content of essential high unsaturated fatty acids, especially arachidonic acid (AA) and eicosapentaenoic acid (EPA) (ca 50% in the total fatty acids), ploysaccharides, and synthetic pigments, especially phycoerythrin (PE)[2,3]. During cultivation, the cells…     

生物工程及其在化学工业中的应用

生物工程是近年来崛起的一门综合性的高新科学技术，也是当代新技术革命中最为活跃的领域。文章简要地介绍和评述了生物工程的主要内容及其在化学工业中应用的概况及发展趋势。     

3种高电流密度离子膜电解槽的性能对比与介绍

目前离子膜电解槽的发展方向为复极、自然循环、高电流密度、低电耗，伍德诺拉公司BM2．7-Ⅲ型槽、美国西方化学公司ExL^B-65槽、日本氯工程公司BiTAC-858槽即具有这些先进性能。对这3种槽进行了介绍与对比。     

应力交变下微型土压力计的标定及应用

为了研究土压力计在不同应力状态下的敏感系数,利用镶嵌有微型土压力计的模型桩,按照两种方式设计应力交变加载模式进行标定:(a)从初始零应力状态分级加载—卸载至零;(b)从初始零应力状态加载到应力最大值,分级卸载—加载,逐渐到零应力状态。研究结果表明:初始应力为零的加载曲线线性较好,敏感系数可用线性函数进行拟合;初始应力不为零的加载曲线线性也较好,敏感系数也可用线性函数进行拟合;而卸载曲线包含显著的非线性和滞后效应,此时敏感系数就不是一个固定值,可采用指数曲线来进行拟合。将获取的标定系数应用于水平受荷模型桩的桩身应力分析中,在加载过程中3.5D~5.5D深处桩身应力一直变大,且变化幅度最大。研究成果可为水利工程中板桩、抗滑桩等水平受荷桩桩身截面尺寸及配筋设计提供参考。     

Transformation of β-Ni(OH)2 to NiO nano-sheets via surface nanocrystalline zirconia coating: Shape and size retention

Shape and size of the synthesized NiO nano-sheets were retained during transformation of sheet-like β-Ni(OH)₂ to NiO at elevated temperatures via nano-sized zirconia coating on the surface of β-Ni(OH)₂. The average grain size was 6.42 nm after 600 °C treatment and slightly increased to 10 nm after 1000 °C treatment, showing effective sintering retardation between NiO nano-sheets. The excellent thermal stability revealed potential application at elevated temperatures, especially for high temperature catalysts and solid-state electrochemical devices.