Changes of constituents and activity to apoptosis and cell cycle during fermentation of tea

Tea is believed to be beneficial for health, and the effects of the fermentation process on its contributions to apoptosis and cell cycle arrest of gastric cancer cells have not been completely investigated. In this study, the chemical components in green tea, black tea and pu-erh tea aqueous extracts were analyzed and compared. The polysaccharide and caffeine levels were substantially higher in the fermented black tea and pu-erh tea, while the polyphenol level was higher in the unfermented green tea. Hence, a treatment of tea aqueous extract and the components, which are emerging as promising anticancer agents, were pursued to determine whether this treatment could lead to enhance apoptosis and cell cycle arrest. In the human gastric cancer cell line SGC-7901, the cell viability and flow cytometry analysis for apoptotic cells indicated effects in a dose-dependent inhibition manner for the three tea treatment groups. The apoptosis rates were found to be elevated after 48 h of treatment with 31.2, 125, and 500 μg/mL of green tea extract, the higher catechins content may be involved in the mechanism. Cell cycle was arrested in S phase in the fermented black tea and pu-erh tea, and the populations were significantly decreased in G2/M phases, possibly due to the oxidation of tea polyphenols, which causes an increase of theabrownins. CCC-HEL-1 normal cells were not sensitive to tea extract. These findings suggest that the fermentation process causes changes of the compounds which might be involved in the changes of cell proliferation inhibition, apoptosis induction and cell cycle arrest.     

以（Cu–Ce–Zr–O）–ScSZ为阳极的固体氧化物燃料电池的制备及性能

采用浸渍法制备掺Cu的Ce–Zr–O固溶体。以掺Cu的Ce–Zr–O固溶体和Sc2O3稳定的ZrO2（scandium oxide-stabilized zirconia,ScSZ）为原料,制备可抗积碳的（Cu–Ce–Zr–O）–ScSZ多孔阳极。采用X射线衍射仪和扫描电子显微镜对固溶体和多孔阳极的物相组成和形貌进行表...     

超小绒面硅基太阳能电池电学性能的数学模拟分析

在充分考虑纳米柱结构太阳能电池的几何特性与低反射率特性的基础上,建立了硅基纳米柱太阳能电池的数学模型,分析了电池单元纳米柱的长度、硅衬底缺陷密度以及表面空穴的复合速率对纳米柱太阳能电池的开路电压、短路电流以及转换效率的影响。结果表明：在纳米柱电池设计制作过程中,低反射率仅是高性能电池的关键因素之一;电池纳米柱的最佳长度...     

Combined effects of cyclooxygenase-1 and cyclooxygenase-2 selective inhibitors on ovarian carcinoma in vivo

The present study was designed to investigate the combined effects of cyclooxygenase (COX)-1 and COX-2 selective inhibitors on human ovarian SKOV-3 carcinoma cells xenograft-bearing mice. The animals were treated with 3 mg/kg SC-560 (a COX-1 selective inhibitor) alone, 25 mg/kg celecoxib (a COX-2 selective inhibitor) alone, or SC-560/celecoxib by gavage, twice a day for three weeks. To test the mechanism of inhibition of tumor growth by COX selective inhibitors, the index of proliferating cells in tumor tissues was determined by immunostaining and the index of apoptotic cells by the terminal-deoxynucleotidyl-transferase-mediated deoxyuridine triphosphate nick end labeling (TUNEL) method. The inhibitory rate on tumor growth in the combination group was 35.54% which is significant statistically compared with that of the control group (P < 0.05). In the combination group, the index of cell proliferation and apoptosis were 12.40% and 51.03% respectively, which are significant statistically compared with those of the control group (22.56%, 19.07%, all P < 0.05). These studies indicate that synergism between two COX inhibitors and inhibitor combination treatment has particular potential for chemoprevention of ovarian cancer growth.     

Applying dry powder coatings to pharmaceutical powders using a comil for improving powder flow and bulk density

A method for applying nano-sized silicon dioxide guest particles onto host pharmaceutical particles (a.k.a. “dry-coating” or “nanocoating”) has been developed using conventional pharmaceutical processing equipment. It has been demonstrated that under selected conditions, a comil can be used to induce sufficient shear to disperse silicon dioxide particles onto the surfaces of host particles such as active pharmaceutical ingredients (API) without significant host particle attrition. In accordance with previous studies on dry coating, the dispersed silicon dioxide adheres to the host particle surface through van der Waals attractions, and reduces bulk powder cohesion. In this work, laboratory and pilot scale comils were used to dry coat pharmaceutical API and excipient powders with 1% w/w silicon dioxide by passing them through the mill with an appropriate combination of screen and impeller. In general, the uncoated powders exhibited poor flow and/or low bulk density. After dry coating with a comil, the powders exhibited a considerable and in some cases outstanding improvement in flow performance and bulk density. This coating process was successful at both the laboratory and pilot scale with similar improvements in flow. The superior performance of the coated powders translated to subsequent formulated blends, demonstrating the benefit of using nanocoated powders over uncoated powders. This particle engineering work describes the first successful demonstration of using a traditional pharmaceutical unit operation that can be run continuously to produce uniform nanocoating and highlights the substantial improvements to powder flow properties when this approach is used.     

Mechanical milling of catalyst support for enhancing the performance in fuel cells

In this work, we studied the characteristic variations of catalyst supports caused by mechanical milling and their electrochemical application in fuel cells. Two different catalyst supports, carbon black (XC-72R) and K20 (mesoporous carbon), were crushed and dispersed by mechanical milling using a bead mill. The bead mill operated with 0.3 μm zirconia beads at the rate of 3500 rpm for 30 min. The secondary particle size of the crushed catalyst supports ranged from around 0.1 μm to 10 μm. The secondary particle size of the catalyst supports after crushing represents a decrease of approximately 10% compared with that of raw catalyst supports. To confirm the role of the catalyst supports in the direct methanol fuel cell (DMFC), Pt and Ru were loaded onto these catalyst supports using an impregnation method. In the single cell test, Pt-Ru/XC-Bead and PtRu/K20-Bead showed power densities of 135 mW/cm² and 144 mW/cm² under air at 60 °C, respectively. The performance values of these catalysts, which were fabricated using reformed catalyst supports, were 10% to 20% higher than those of raw catalyst supports. As a result, the catalyst supports crushed by the bead mill helped to improve the electrochemical performance of the direct methanol fuel cell.     

海泥电池Fe_3O_4/PANI复合阳极制备及电化学性能

由FeCl2、FeCl3、樟脑磺酸及苯胺合成Fe3O4/PANI,将Fe3O4/PANI粉末与碳粉按1∶1混合均匀,同聚四氟乙烯乳液调和后,压涂在石磨电极表面,制成Fe3O4/PANI复合阳极并测试其电化学性能。结果表明,改性后阳极表面细菌附着数量提高2倍多,有利于细菌附着。复合阳极抗极化性能明显提高,动力学活性明显增强,电流密度增加,最大功率密度提高到300 mW/m2。该复合阳极可望用于海泥电池的应用开发研究。     

固体氧化物燃料电池阳极材料研究进展

主要对SOFC阳极材料的最新研究进展进行综述。首先介绍了SOFC对阳极材料的基本要求,而后对目前各种阳极材料在性能方面的优势和不足进行了比较,其中较为详细地介绍了传统的金属陶瓷阳极和新型的钙钛矿型阳极的研究进展情况,最后对阳极材料的未来发展方向进行了展望。     

Effective harvesting,detection, and conversion of IR radiation due to quantum dots with built-in charge

We analyze the effect of doping on photoelectron kinetics in quantum dot [QD] structures and find two strong effects of the built-in-dot charge. First, the built-in-dot charge enhances the infrared [IR] transitions in QD structures. This effect significantly increases electron coupling to IR radiation and improves harvesting of the IR power in QD solar cells. Second, the built-in charge creates potential barriers around dots, and these barriers strongly suppress capture processes for photocarriers of the same sign as the built-in-dot charge. The second effect exponentially increases the photoelectron lifetime in unipolar devices, such as IR photodetectors. In bipolar devices, such as solar cells, the solar radiation creates the built-in-dot charge that equates the electron and hole capture rates. By providing additional charge to QDs, the appropriate doping can significantly suppress the capture and recombination processes via QDs. These improvements of IR absorption and photocarrier kinetics radically increase the responsivity of IR photodetectors and photovoltaic efficiency of QD solar cells.     

Kinetic Analysis of Terminal and Unactivated C?H Bond Oxyfunctionalization in Fatty Acid Methyl Esters by Monooxygenase‐Based Whole‐Cell Biocatalysis

The alkane monooxygenase AlkBGT from Pseudomonas putida GPo1 constitutes a versatile enzyme system for the ω‐oxyfunctionalization of medium chain‐length alkanes. In this study, recombinant Escherichia coli W3110 expressing alkBGT was investigated as whole‐cell catalyst for the regioselective biooxidation of fatty acid methyl esters to terminal alcohols. The ω‐functionalized products are of general economic interest, serving as building blocks for polymer synthesis. The whole‐cell catalysts proved to functionalize fatty acid methyl esters with a medium length alkyl chain specifically at the ω‐position. The highest specific hydroxylation activity of 104 U g_CDW⁻¹ was obtained with nonanoic acid methyl ester as substrate using resting cells of E. coli W3110 (pBT10). In an optimized set‐up, maximal 9‐hydroxynonanoic acid methyl ester yields of 95% were achieved. For this specific substrate, apparent whole‐cell kinetic parameters were determined with a V_max of 204±9 U g_CDW⁻¹, a substrate uptake constant (K_S) of 142±17 μM, and a specificity constant V_max/K_S of 1.4 U g_CDW⁻¹ μM ⁻¹ for the formation of the terminal alcohol. The same E. coli strain carrying additional alk genes showed a different substrate selectivity. A comparison of biocatalysis with whole cells and enriched enzyme preparations showed that both substrate availability and enzyme specificity control the efficiency of the whole‐cell bioconversion of the longer and more hydrophobic substrate dodecanoic acid methyl ester. The efficient coupling of redox cofactor oxidation and product formation, as determined in vitro, combined with the high in vivo activities make E. coli W3110 (pBT10) a promising biocatalyst for the preparative synthesis of terminally functionalized fatty acid methyl esters.