基于Word文档的数据隐藏方法

在分析当前数据隐藏与恢复相关技术研究基础上,参照微软官方最新公布的复合文档存储规范,从利用载体Word文档现有空间中未真正使用部分和适度扩展新空间两条思路出发,设计一种利用Word文档作载体隐藏秘密信息的解决方案,包括在文字、各种嵌入式对象及其相应控制结构数据中隐藏信息。实践表明,隐藏数据后的载体文档可以被正常拷贝和使用电子邮件传送,根据需要隐藏的信息随机选择使用该方案,被隐藏信息更不容易被侦测出来,被二次编辑后被隐藏信息一般不会被破坏,鲁棒性不错,具有一定的实用价值。     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

供水管网中压力真实值的批次平差算法

分析了测压点优化布置的意义及原则,并根据供水周期性,依靠数量有限的测压点压力数据,结合管网的水力计算,利用传统的平差原理,将测压点以外的其它节点压力进行真实性校正,推算出了管网各节点的真实压力值,实现了通过有限测压点数据对管网所有节点压力的全面了解。     

Locally linear discriminant embedding: An efficient method for face recognition

In this paper an efficient feature extraction method named as locally linear discriminant embedding (LLDE) is proposed for face recognition. It is well known that a point can be linearly reconstructed by its neighbors and the reconstruction weights are under the sum-to-one constraint in the classical locally linear embedding (LLE). So the constrained weights obey an important symmetry: for any particular data point, they are invariant to rotations, rescalings and translations. The latter two are introduced to the proposed method to strengthen the classification ability of the original LLE. The data with different class labels are translated by the corresponding vectors and those belonging to the same class are translated by the same vector. In order to cluster the data with the same label closer, they are also rescaled to some extent. So after translation and rescaling, the discriminability of the data will be improved significantly. The proposed method is compared with some related feature extraction methods such as maximum margin criterion (MMC), as well as other supervised manifold learning-based approaches, for example ensemble unified LLE and linear discriminant analysis (En-ULLELDA), locally linear discriminant analysis (LLDA). Experimental results on Yale and CMU PIE face databases convince us that the proposed method provides a better representation of the class information and obtains much higher recognition accuracies.     

Effect of pressure on three catalytic partial oxidation reactions at millisecond contact times

The effects of pressure on reactant conversion and product selectivities in three catalytic oxidation systems have been examined at pressures between 1 and > 5 atm. Reaction was sustained autothermally near adiabatic operating conditions at temperatures of 1000°C with residence times over the noble metal catalysts between 10^–4 and 10^–2 s. The three systems investigated were (1) HCN synthesis over Pt-10% Rh gauze catalysts, (2) methane oxidation to synthesis gas (CO and H₂) over rhodium-coated monoliths, and (3) ethane conversion to ethylene over platinum-coated monoliths. We find that selectivities in all three reactions do not change dramatically with approximately a five-fold increase in pressure. This strongly suggests that free radical homogeneous chain reactions are not significant in these processes and that they can be operated reliably above atmospheric pressure. For the synthesis of HCN over Pt-10% Rh gauzes, the selectivity to HCN can be maintained above 0.75 at pressures up to 5.5 atm. Selectivities to synthesis gas (CO and H₂) from a methane-air mixture over a Rh-coated foam monolith at pressures up to 5.5 atm were maintained above 0.90. Over a Pt-coated foam monolith, the selectivity to ethylene from ethane-air and ethane-O₂ mixtures was independent of pressure up to 6.5 atm and conversion rose slightly although it was necessary to maintain constant velocity and residence time over the catalyst to avoid carbon formation.This research was supported by DOE under Grant No. DE-FG02-88ER13878.     

基于LMD的PWM整流电路故障特征提取新方法

脉冲宽度调制(PWM)整流电路结构日益复杂,对其可靠运行提出了更高的要求;对局域均值分解(LMD)用于PWM整流电路的故障特征提取进行研究,提出一种基于LMD和加权频带能量法的特征提取新方法;该方法通过逐步抽取调频调幅成分将故障信号在频域上展开,然后基于信号能量的频带分布特点,充分考虑各频带成分与故障的相关性,构造故障特征向量,实现特征提取;最后以PWM整流电路为例进行仿真,相电压380V,仿真时间0.5s,0.1s时注入故障;结果表明,该方法能有效地提取故障信号的特征,并降低特征向量的维数。     

0.618法最优确定盘状摆动凸轮机构的最小基圆半径

在满足机构许用压力角条件下,采用０．６１８法最优确定盘状摆动凸轮机械的最小基圆半径。     

A hybrid data-fusion system using modal data and probabilistic neural network for damage detection

This paper addresses a novel hybrid data-fusion system for damage detection by integrating the data fusion technique, probabilistic neural network (PNN) models and measured modal data. The hybrid system proposed consists of three models, i.e. a feature-level fusion model, a decision-level fusion model and a single PNN classifier model without data fusion. Underlying this system is the idea that we can choose any of these models for damage detection under different circumstances, i.e. the feature-level model is preferable to other models when enormous data are made available through multi-sensors, whereas the confidence level for each of multi-sensors must be determined (as a prerequisite) before the adoption of the decision-level model, and lastly, the single model is applicable only when data collected is somehow limited as in the cases when few sensors have been installed or are known to be functioning properly. The hybrid system is suitable for damage detection and identification of a complex structure, especially when a huge volume of measured data, often with uncertainties, are involved, such as the data available from a large-scale structural health monitoring system. The numerical simulations conducted by applying the proposed system to detect both single- and multi-damage patterns of a 7-storey steel frame show that the hybrid data-fusion system cannot only reliably identify damage with different noise levels, but also have excellent anti-noise capability and robustness.     

SIFT在行星表面探测器视觉导航系统中的应用

介绍了行星探测器自主导航系统的相关背景,讨论了行星探测器自主视觉导航系统算法的主要目的和传感器信息融合的必要性,并就此引入了尺度不变特征变换(SIFT)的相关理论分析.对SIFT方法提出了改进,从而改善了算法的效果.最后给出了三维重建和目标追踪的实验结果.