多维超几何分布的最可能成功数

超几何分布是一种重要的离散型概率分布,本文利用反证法以及比较法求出了三维超几何分布的最可能成功次数,并在此基础上,求出了多维超几何分布的最可能成功次数.     

铒离子注入晶体硅的射程分布和离散研究

用400 keV能量的铒离子垂直注入晶体硅(Si)样品中。利用卢瑟福背散射技术研究了能量为400 keV、剂量为5×1015ions/cm2的铒离子注入Si晶体的平均投影射程、射程离散和深度分布。测出的实验值和TRIM 98得到的理论模拟值进行了比较,发现实验值跟TRIM 98模拟计算的理论值符合较好。     

配电网金属氧化物避雷器的选择

文章阐述了配电网金属氧化物避雷器选择的基本内容,给出了选择结果.     

不同线密度粘胶原丝及其碳纤维的结构性能对比

用Weibull分析处理 10mm长的 4种不同线密度粘胶原丝和相应碳纤维的单丝断裂强度 ,得到原丝线密度、强度分布和碳纤维强度的对应关系。采用透射电镜 (TEM )和小角X散射 (SAXS)分析粗旦原丝 ,发现孔洞较多 ,并存在大于 70nm的大孔洞。截面和表面照片也揭示出细旦原丝截面相对规整 ,表面较光滑 ,粗旦原丝则反之。结果表明 ,原丝线密度小 ,截面形状圆整 ,缺陷少 ,所制得的碳纤维强度高。     

复杂系统平均寿命的估计和性质

根据已知的基于最小路径或最小割集复杂系统可靠度函数的解析表达式,给出当子系统寿命分布服从指数分布时,系统平均寿命的表达式.利用这一表达形式,在子系统寿命变量服从指数分布条件下,分别就完全数据和截尾数据两种情况,给出了系统平均寿命的估计,并对估计性质进行了研究.并在完全数据下,给出了估计的渐近分布.     

混合室分配板成形工艺及模具设计

对混合室分配板零件介绍了一种落料拉伸成形和立体切沿分割的工艺思路以及模具结构和相关的理论计算 ,在实际应用中获得了好的效果。对同类形状产品 ,尤其是涉及到需要进行立体切沿分割的制件 ,可提供借鉴。     

转轮体铸造工艺的优化设计

本文重点总结了水轮机的重要部件转轮体常发生的主要铸造质量问题,分析了产生缩孔缩松、裂纹、尺寸超差等质量问题的主要直接原因,并提出了铸造工艺优化设计方案。     

污水处理厂污泥厌氧消化优化设计与运行探讨

对国内典型的污水处理厂污泥厌氧消化系统进行调研发现,厌氧消化系统的运行管理尚存在诸多问题。在总结白龙港污水处理厂污泥厌氧消化调试与运行管理经验的基础上,针对厌氧消化工艺存在的普遍性问题,提出了厌氧消化系统设计和运行管理方面的建议,以促进工艺设计优化,提高运行管理水平。     

Performance comparison of reduced models for leak detection in water distribution networks

This paper presents a methodology for comparing the performance of model-reduction strategies to be used with a diagnostic methodology for leak detection in water distribution networks. The goal is to find reduction strategies that are suitable for error-domain model falsification, a model based data interpretation methodology. Twelve reduction strategies are derived from five strategy categories. Categories differ according to the manner in which nodes are selected for deletion. A node is selected for deletion according to: (1) the diameter of the pipes; (2) the number of pipes linked to a node; (3) the angle of the pipes in the case of two-pipe nodes; (4) the distribution of the water demand; and, (5) a pair-wise combination of some categories.The methodology is illustrated using part of a real network. Performance is evaluated first by judging the equivalency of the reduced network with the initial network (before the application of any reduction procedure) and secondly, by assessing the compatibility with the diagnostic methodology. The results show that for each reduction strategy the equivalency of networks is verified. Computational time can be reduced to less than 20% of the non-reduced network in the best case. Results of diagnostic performance show that the performance decreases when using reduced networks. The reduction strategy with the best diagnostic performance is that based on the angle of two-pipe nodes, with an angle threshold of 165°. In addition, the sensitivity of the performance of the reduced networks to variation in leak intensity is evaluated. Results show that the reduction strategies where the number of nodes is significantly reduced are the most sensitive.Finally this paper describes a Pareto analysis that is used to select the reduction strategy that is a good compromise between reduction of computational time and performance of the diagnosis. In this context, the extension strategy is the most attractive.