基于IPv6技术的网络家电控制电路设计

随着信息技术的发展,计算机网络越来越深入平时的生产生活中,家用电器网络化已经成为一种发展趋势。本文实现一种基于IPv6技术的家电网络控制电路的硬件设计。应用该方法设计的家电系统在智能化及网络化具有较好性能。     

Latchkey children and susceptibility to peer pressure: An ecological analysis.

Data on adolescents' after-school experiences and their susceptibility to peer pressure were derived from surveys administered to a heterogeneous sample of 865 adolescents in Grades 5–9. Consistent with the findings of previous studies, the results show that Ss who reported home after school were not significantly different from those who were supervised by their parents at home during after-school hours. However, when a 2nd sample of latchkey children (n?=?594) was studied to include greater variation in after-school experiences, Ss who were more removed from adult supervision were found to be more susceptible to peer pressure to engage in antisocial activity. Ss who were home alone were less susceptible to peer pressure than are those who were at a friend's house after school, and those who were at a friend's house, in turn, were less susceptible than were those who describe themselves as "hanging out." Moreover, latchkey Ss whose parents knew their whereabouts and those who had been raised authoritatively were less susceptible to peer influence than were their peers, even if their afternoons were spent in contexts in which adult supervision was lax and susceptibility to peer pressure was generally high. (17 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining was carried out to investigate microfracture, residual damage, and surface roughness associated with material removal and surface generation. Brittle versus plastic deformation was studied using Vickers indention and nano-indentation. To characterize the abrasive machining response, the 6H-SiC (0001) substrates were ground using diamond wheels with grit sizes of 25, 15 and 7 μm, and then polished with diamond suspensions of 3 and 0.05 μm. It is found that in indentation, there was a scale effect for brittle versus plastic deformation in 6H-SiC substrates. Also, in grinding, the scales of fracture and surface roughness of the substrates decreased with a decrease in diamond grit size. However, in polishing, a reduction in grit size of diamond suspensions gave no significant improvement in surface roughness. Furthermore, the results showed that fracture-free 6H-SiC (0001) surfaces were generated in polishing with the existence of the residual crystal defects, which were associated with the origin of defects in single crystal growth.     

基于STM32的多功能液体检测系统

本系统以STM32F103RCT6单片机为核心控制芯片,可以一键自动测量容器内液体的重量和液位参数,并显示测量数据、判别液体种类。使用激光与浮板进行液位测量;使用压力传感器与24位AD转化模块HX711进行高精度的重量测量;利用pH值传感器、光电传感器、导电率传感器获得液体不同的物理特性,区分液体种类。系统模块构成主要包括单片机系统模块、电源模块、激光测距模块、称重模块、传感器模块、OLED显示模块和按键模块,具有多功能、测量准确、反应速度快的特点。     

Ti-22Nb-6Zr(at%)合金的超弹性和形状记忆效应

用弯曲法和拉伸法测定Ti-22Nb-6Zr（at％）合金的超弹性和形状记忆效应，研究固溶处理温度对Ti-22Nb-6Zr合金组织结构及性能的影响。结果表明：固溶处理后Ti-22Nb-6Zr合金的室温组织为单一的β相，晶粒尺寸随固溶处理温度升高而增大；合金的静态弹性模量小于30GPa；Ti-22Nb-6Zr合金具有良好的超弹性和一定的形状记忆效应。室温下变形，合金的超弹性和形状记忆效应随固溶处理温度升高而提高。900℃固溶处理后的合金在室温下拉伸变形，应变为5％时，总的最大回复应变达4．12％，其中超弹性回复应变为3．91％，记忆回复应变为0.21％。     

EFFECT OF AGING ON HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF STEEL Cr21Ni6Mn9N

Effects of 650℃ aging for 1—1000 h on structure and hydrogen embrittlement susceptibility(HES)of steel Cr21Ni6Mn9N have been investigated.The results show that M_(23)C_6 typecarbide precipitates at grain boundaries and Cr-depletive region appears beside them duringaging.The precipitates grow and connect each other as the aging time prolongs.Meanwhile,the degree of Cr-depletion aggravates first and then recovers gradually while the aging time isvery long,i.e.,1000 h.The HES of the steel increases with increasing aging time but does notreduce with the recovery of Cr content at the Cr-depletive region.That implies that the ex-isting of carbides at grain boundaries might be the main reason which promotes the HES ofsteel during aging.     

化学气相沉积法制备碳化铬薄膜的研究

以三（2,2,6,6-四甲基-3,5-庚二酮）化铬为前驱体,采用化学气相沉积（CVD）法在氧化铝（Al₂O₃）陶瓷基板上制备碳化铬（Cr₃C₂）薄膜,其中沉积温度为723 K至923 K,沉积时间为1 200 s。研究了不同沉积温度对Cr₃C₂薄膜的相组成、择优取向、宏观表面、微观结构及电学性能的影响。结果表明,在723 K至923 K下制备得到具有高度（130）择优取向的Cr₃C₂薄膜。随着沉积温度的升高,Cr₃C₂薄膜表面先由光滑变粗糙,后逐渐变光滑;薄膜晶粒呈椭球型生长;薄膜的厚度先增加后减小,从而导致电阻先减小后增大。在798 K时制备得到厚度最大且电阻最小的（130）择优取向的最佳Cr₃C₂薄膜。同时,在实验条件下Cr₃C₂薄膜表面存在少量的碳和Cr₂O₃。     

30%苄氨基嘌呤悬浮剂对芹菜生长和品质的影响

田间条件下研究了不同浓度苄氨基嘌呤悬浮剂对芹菜生长和品质的影响。结果表明,剂量浓度在60~120 mg/kg范围内均可提高芹菜的株高和产量,120 mg/kg剂量浓度处理对亩产量和株高的提高幅度达到了显著水平(P<0.05);药剂对芹菜安全性和品质分析结果表明,试验药剂30%苄氨基嘌呤悬浮剂各剂量浓度对芹菜均没有明显药害,对芹菜的干物质重量、维生素(Vc)和可溶性固形物含量均无显著影响。     

Effects of Adenine Methylation on the Structure and Thermodynamic Stability of a DNA Minidumbbell

DNA methylation is a prevalent regulatory modification in prokaryotes and eukaryotes. N¹-methyladenine (m¹A) and N⁶-methyladenine (m⁶A) have been found to be capable of altering DNA structures via disturbing Watson–Crick base pairing. However, little has been known about their influences on non-B DNA structures, which are associated with genetic instabilities. In this work, we investigated the effects of m¹A and m⁶A on both the structure and thermodynamic stability of a newly reported DNA minidumbbell formed by two TTTA tetranucleotide repeats. As revealed by the results of nuclear magnetic resonance spectroscopic studies, both m¹A and m⁶A favored the formation of a T·m¹A and T·m⁶A Hoogsteen base pair, respectively. More intriguingly, the m¹A and m⁶A modifications brought about stabilization and destabilization effects on the DNA minidumbbell, respectively. This work provides new biophysical insights into the effects of adenine methylation on the structure and thermodynamic stability of DNA.