PAN基原丝预氧丝炭纤维微结构的几种新的X射线衍射散射定量表征技术

介绍几种新近开发的针对PAN基原丝、预氧丝和炭丝微结构和结构缺陷的X射线衍射与散射定量表征技术,它们是:纤维材料中柱状(椭球状)纳米取向微孔体积分数X射线小角散射定量表征方法;纤维材料中柱状(椭球状)纳米取向微孔取向角的小角散射定量表征方法;预氧丝中链状相与环化相体积分数的小角衍射定量表征方法以及炭纤维中乱层石墨相与单层石墨相的X射线广角衍射定量表征方法等。     

我国有机食品的现状及发展趋势

介绍了有机食品的特点及对人与自然和谐发展的作用,并概述了我国有机食品的发展现状及趋势.     

Metal–Organic Gel‐Derived FexOy/Nitrogen‐Doped Carbon Films for Enhanced Lithium Storage

The development of cost‐effective and flexible electrodes is demanding in the field of energy storage. Herein, flexible Fe_xO_y/nitrogen‐doped carbon films (Fe_xO_y/NC‐MOG) are prepared by facile electrospinning of Fe‐based metal–organic gels (MOGs) followed by high‐temperature carbonization. This approach allows the even mixing of fragile coordination polymers with polyacrylonitrile into flexible films while reserving the structural characteristics of coordination polymers. After thermal treatment, Fe_xO_y/NC‐MOG films possess uniformly distributed Fe_xO_y nanoparticles and larger accessible surface areas than traditional Fe_xO_y‐NC films without MOG. Taking advantage of the unique structure, Fe_xO_y/NC‐MOG exhibits a superior rate performance (449.8 mA h g^?1 at 5000 mA g^–1) and long cycle life (629.3 mA h g^–1 after 500 cycles at 1000 mA g^–1) when used as additive‐free anodes in lithium‐ion batteries.     

无机纳米抗菌剂及其载体

综述了无机纳米抗菌剂及其载体的最近研究进展。无机纳米抗菌剂主要包括光催化型和金属型,抗菌剂载体主要有沸石、二氧化硅、磷酸盐系、壳聚糖、脂质体和聚合物等。具体介绍了金属型和光催化型这两类无机纳米抗菌剂的抗菌机理、抗菌特性及研究现状等,并概述了当下无机纳米抗菌剂载体的主要种类和特点,同时对无机纳米抗菌剂的研究方向进行了展望...     

In-fiber liquid-level probe based on Michelson interferometer via dual-mode elliptical multilayer-core fiber

Abstract

An in-fiber liquid-level probe fabricated from homemade dual-mode elliptical multilayer-core fiber (EMCF) was proposed and experimentally demonstrated. The proposed sensor simply consists of a segment of the EMCF with one end coated with silver film, and a Michelson interferometer is roughly established when light from single-mode fiber incident from the other end. The detected interference patterns, rather clean due to the few-mode property, shift as the liquid level due to strong interaction between high-order modes and measurands through evanescent waves. Both the propagation characteristics and operation principle of such a sensor were demonstrated in detail, and sensitivities of 33.48, 43.35, and 48.93 pm/mm corresponding to liquid indices of 1.333, 1.353, and 1.373 were successfully achieved with a 50-mm EMCF probe, respectively. Moreover, the proposed sensor had the potential to discriminate measurand index after proper calibration.     

基于K-means聚类和LVQ神经网络的OLED缺陷像素识别

提出改进的K-means聚类分割和LVQ神经网络分类的方法，用于有机发光二极管显示面板喷墨打印制程中缺陷像素的识别。首先采用改进的K-means聚类算法对预处理后的打印像素进行分割，然后采用连通域水平矩形确定每一个打印像素的坐标及几何特征，再通过灰度共生矩阵提取其纹理特征，最后通过LVQ神经网络对所述特征进行分类，完成缺陷像素的标记及分类统计。结果表明，本文算法的识别率明显优于其他常用分类识别算法，平均缺陷检测率为100%，分类准确率达到98.9%，单像素检测时间为8.3 ms。     

Removal of an Azo Dye from Wastewater through the Use of Two Technologies: Magnetic Cyclodextrin Polymers and Pulsed Light

Water pollution by dyes is a huge environmental problem; there is a necessity to produce new decolorization methods that are effective, cost-attractive, and acceptable in industrial use. Magnetic cyclodextrin polymers offer the advantage of easy separation from the dye solution. In this work, the β-CD-EPI-magnetic (β-cyclodextrin-epichlorohydrin) polymer was synthesized, characterized, and tested for removal of the azo dye Direct Red 83:1 from water, and the fraction of non-adsorbed dye was degraded by an advanced oxidation process. The polymer was characterized in terms of the particle size distribution and surface morphology (FE-SEM), elemental analysis (EA), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), infrared spectrophotometry (IR), and X-ray powder diffraction (XRD). The reported results hint that 0.5 g and pH 5.0 were the best conditions to carry out both kinetic and isotherm models. A 30 min contact time was needed to reach equilibrium with a qmax of 32.0 mg/g. The results indicated that the pseudo-second-order and intraparticle diffusion models were involved in the assembly of Direct Red 83:1 onto the magnetic adsorbent. Regarding the isotherms discussed, the Freundlich model correctly reproduced the experimental data so that adsorption was confirmed to take place onto heterogeneous surfaces. The calculation of the thermodynamic parameters further demonstrates the spontaneous character of the adsorption phenomena (ΔG° = −27,556.9 J/mol) and endothermic phenomena (ΔH° = 8757.1 J/mol) at 25 °C. Furthermore, a good reusability of the polymer was evidenced after six cycles of regeneration, with a negligible decline in the adsorption extent (10%) regarding its initial capacity. Finally, the residual dye in solution after treatment with magnetic adsorbents was degraded by using an advanced oxidation process (AOP) with pulsed light and hydrogen peroxide (343 mg/L); >90% of the dye was degraded after receiving a fluence of 118 J/cm²; the discoloration followed a pseudo first-order kinetics where the degradation rate was 0.0196 cm²/J. The newly synthesized β-CD-EPI-magnetic polymer exhibited good adsorption properties and separability from water which, when complemented with a pulsed light-AOP, may offer a good alternative to remove dyes such as Direct Red 83:1 from water. It allows for the reuse of both the polymer and the dye in the dyeing process.     

蛋白质接枝改性腈纶的水解工艺研究

采用NaOH溶液对腈纶进行水解,表面接枝蛋白质制得改性腈纶。讨论了NaOH浓度、水解温度、水解时间对腈纶接枝效果的影响。结果表明:在水解反应温度80~90℃、NaOH溶液质量分数14%、水解时间15 m in时,改性腈纶接枝率较高。力学性能分析和电镜表面观察表明:在腈纶表面接枝大豆蛋白质,不仅可以赋予纤维表面完整的蛋白质覆盖层,而且还可以较好的弥补纤维因水解而产生的表面损伤和力学性能下降等缺陷。     

光纤数据传输在束管监测系统中的应用

简要介绍了光纤数据传输技术在束管监测系统中的应用，描述了数据光端机的结构、原理等。