凹陷阵列印刷电路板式换热器里超临界甲烷换热和流动特性模拟研究

为了强化液化甲烷在印刷电路板式微通道换热器中的换热能力,提出了一种凹陷阵列的微小通道换热器整体性能提高的被动式强化技术并进行了数值模拟验证。研究了流体温度范围125—265 K范围内的超临界甲烷在凹陷阵列结构微通道内的换热和流动特性,考察了凹陷阵列微通道和光滑微通道下,流体温度、质量流量、雷诺数和进口压力对传热系数、努塞尔数、摩擦因子和综合效益系数(PEC)的影响。此外,通过凹陷结构的局部流动特性分析强化换热机理,数值模拟结果表明相较于光滑微通道,凹陷阵列微通道的换热特性得到大大强化,且随雷诺数(由质量流量或者流体温度改变)的增大而增强,而摩擦因子只是有较弱的劣化。     

微结构塑件的注塑充填尺度效应

微尺度聚合物熔体流动具有明显的尺度效应,模具温度和注射速率是微注塑充填流动的关键影响因素。文中采用微细电火花铣削技术设计分别制造了一模八腔的带有200μm和300μm微孔的注塑模具。以聚丙烯(PP)进行单因素充模流动工艺实验,研究了模具温度和注射速率对直径为200μm和300μm微圆柱充填高度影响规律。结果表明,当模具温度为30℃和注射速率为60%时,直径200μm微圆柱孔的充填高度小于直径300μm微圆柱孔的充填高度,且Ⅰ型腔的微圆柱充填高度大于Ⅱ的充填高度。随着模具温度升高和注射速率增加,2种微孔充填高度差在减小,Ⅰ型腔和Ⅱ型腔之间的充填高度差值也在减小。可见,升高模具温度和增加注射速率可以减少微尺度效应对微圆柱孔充填高度的影响,同时,还可以减小流动不平衡程度。     

网络微社区影响下文化旅游服务平台设计研究

目的针对市场里的旅游服务平台形形色色,良莠不齐现状造成的功能定位模糊、可用率低、基础用户少、难以形成用户黏度较高的平台健康可持续发展模式等问题,藉由网络微社区角度进行文化旅游服务平台的设计研究探索。方法通过案例分析法、比较分析法收集、整理、分析现有的旅游服务平台设计模式,发现问题,再用POEMO框架进行文化旅游服务平台功能模块的方案设计,并探索UGC模式对服务平台的创新个性化服务模块的正向影响,最终提取优选方案。结论设计了文化旅游服务平台构建的框架,阐述了服务平台建设的主要内容、采用的途径和具有的个性化定制服务,在网络微社区的影响下,将数字技术与文化旅游服务平台设计相结合,为相关服务平台构建提供借鉴和参考。     

A Review of Smart Superwetting Surfaces Based on Shape-Memory Micro/Nanostructures

Bioinspired smart superwetting surfaces with special wettability have aroused great attention from fundamental research to technological applications including self-cleaning, oil–water separation, anti-icing/corrosion/fogging, drag reduction, cell engineering, liquid manipulation, and so on. However, most of the reported smart superwetting surfaces switch their wettability by reversibly changing surface chemistry rather than surface microstructure. Compared with surface chemistry, the regulation of surface microstructure is more difficult and can bring novel functions to the surfaces. As a kind of stimulus-responsive material, shape-memory polymer (SMP) has become an excellent candidate for preparing smart superwetting surfaces owing to its unique shape transformation property. This review systematically summarizes the recent progress of smart superwetting SMP surfaces including fabrication methods, smart superwetting phenomena, and related application fields. The smart superwettabilities, such as superhydrophobicity/superomniphobicity with tunable adhesion, reversible switching between superhydrophobicity and superhydrophilicity, switchable isotropic/anisotropic wetting, slippery surface with tunable wettability, and underwater superaerophobicity/superoleophobicity with tunable adhesion, can be obtained on SMP micro/nanostructures by regulating the surface morphology. Finally, the challenges and future prospects of smart superwetting SMP surfaces are discussed.     

Nanowatt-Level Photoactivated Gas Sensor Based on Fully-Integrated Visible MicroLED and Plasmonic Nanomaterials

Photoactivated gas sensors that are fully integrated with micro light-emitting diodes (µLED) have shown great potential to substitute conventional micro/nano-electromechanical (M/NEMS) gas sensors owing to their low power consumption, high mechanical stability, and mass-producibility. Previous photoactivated gas sensors mostly have utilized ultra-violet (UV) light (250–400 nm) for activating high-bandgap metal oxides, although energy conversion efficiencies of gallium nitride (GaN) LEDs are maximized in the blue range (430–470 nm). This study presents a more advanced monolithic photoactivated gas sensor based on a nanowatt-level, ultra-low-power blue (λ_peak = 435 nm) µLED platform (µLP). To promote the blue light absorbance of the sensing material, plasmonic silver (Ag) nanoparticles (NPs) are uniformly coated on porous indium oxide (In₂O₃) thin films. By the plasmonic effect, Ag NPs absorb the blue light and spontaneously transfer excited hot electrons to the surface of In₂O₃. Consequently, high external quantum efficiency (EQE, ≈17.3%) and sensor response (ΔR/R₀ (%) = 1319%) to 1 ppm NO₂ gas can be achieved with a small power consumption of 63 nW. Therefore, it is highly expected to realize various practical applications of mobile gas sensors such as personal environmental monitoring devices, smart factories, farms, and home appliances.     

The Road Towards Planar Microbatteries and Micro‐Supercapacitors: From 2D to 3D Device Geometries

The rapid development and further modularization of miniaturized and self‐powered electronic systems have substantially stimulated the urgent demand for microscale electrochemical energy storage devices, e.g., microbatteries (MBs) and micro‐supercapacitors (MSCs). Recently, planar MBs and MSCs, composed of isolated thin‐film microelectrodes with extremely short ionic diffusion path and free of separator on a single substrate, have become particularly attractive because they can be directly integrated with microelectronic devices on the same side of one single substrate to act as a standalone microsized power source or complement miniaturized energy‐harvesting units. The development of and recent advances in planar MBs and MSCs from the fundamentals and design principle to the fabrication methods of 2D and 3D planar microdevices in both in‐plane and stacked geometries are highlighted. Additonally, a comprehensive analysis of the primary aspects that eventually affect the performance metrics of microscale energy storage devices, such as electrode materials, electrolyte, device architecture, and microfabrication techniques are presented. The technical challenges and prospective solutions for high‐energy‐density planar MBs and MSCs with multifunctionalities are proposed.     

Phoretic Liquid Metal Micro/Nanomotors as Intelligent Filler for Targeted Microwelding

Micro/nanomotors (MNMs) have emerged as active micro/nanoplatforms that can move and perform functions at small scales. Much of their success, however, hinges on the use of functional properties of new materials. Liquid metals (LMs), due to their good electrical conductivity, biocompatibility, and flexibility, have attracted considerable attentions in the fields of flexible electronics, biomedicine, and soft robotics. The design and construction of LM‐based motors is therefore a research topic with tremendous prospects, however current approaches are mostly limited to macroscales. Here, the fabrication of an LM‐MNM (made of Galinstan, a gallium–indium–tin alloy) is reported and its potential application as an on‐demand, self‐targeting welding filler is demonstrated. These LM‐MNMs (as small as a few hundred nanometers) are half‐coated with a thin layer of platinum (Pt) and move in H₂O₂ via self‐electrophoresis. In addition, the LM‐MNMs roaming in a silver nanowire network can move along the nanowires and accumulate at the contact junctions where they become fluidic and achieve junction microwelding at room temperature by reacting with acid vapor. This work presents an intelligent and soft nanorobot capable of repairing circuits by welding at small scales, thus extending the pool of available self‐propelled MNMs and introducing new applications.     

直径2mm电磁型微马达的研制及其气隙磁场的分析

微机电系统（ＭＥＭＳ）是正在国际上发展的新兴学科,微马达是微机电系统中的关键器件,本文介绍了研制成的直径为２ｍｍ、高０．７ｍｍ的电磁型微马达的结构特点,并对气隙磁场分布进行了分析讨论。     

应用于电磁驱动器的非线性平面微弹簧及其集成制造工艺研究

平面微弹簧是MEMS器件(如微驱动器、开关等)中一种常用的微结构。目前,平面非线性微弹簧的设计、制造与应用正日益成为关注的焦点。本文针对微机械电磁驱动器的需求,研制了一种变形量在100 μm左右,弹性变形力在5 mN附近的非线性变刚度微弹簧。研究包括通过仿真分析确定了弹簧的结构方案和影响因素,提出了配套的原位集成制造微加工工艺,并测试了所研制“V型”平面微弹簧的非线性特性,验证了所提出方案的可行性。为非线性弹簧的进一步设计和应用提供参考。