氨纶氯水降解及耐氯机理的探讨

应用红外光谱分析方法，对氨纶（ＰＵ纤维）氯水降解及耐氯机理进行了初步的研究。结果表明，ＰＵ浸氯水后，因受活性氯原子的攻击，ＰＵ大分子软链段的碳－碳键发生断裂，形成碳－氯化合物，添加剂加入后，因与ＰＵ大分子的软链段形成螯合物，从而避免了活性氯原子的攻击，有效地保护了软链段，使氨纶耐氯性能明显改善。     

制造泡沫玻璃的方法与模具

将泡沫玻璃配合料制备成块状物,将配合料块按规定间隙在模具中平铺码放并烧成,使配合料块熔为一体,形成较小变形的平板状泡沫玻璃.其制造模具是由底板、上盖及L型围板构成的箱型结构,模具各部位通过V字沟相互联结,保证各部位能自由地附着和脱离.模具多层码放烧制,模具间必须设置间隙.在模具上设置通孔可以有效地抑制膨胀过量问题.     

德国用环戊烷代替氟里昂（CFC）作为硬质PU泡沫发泡剂的新技术

本文介绍了环戊烷的运输，多元醇／环戊烷混合装置及混合料储存的技术并详细叙述使用环戊烷作为发泡剂的安全方法。     

Preparation and properties of microcapsule with EVA core‐PU shell structure

Microcapsule with poly(ethylene‐co‐vinylacetate) (EVA) core‐polyurethane (PU) shell structure was synthesized by interfacial polymerization in aqueous polyol dispersion with ethylene diamine as the chain extender of toluene diisocyanate in poly(vinyl alcohol) aqueous solution as the stabilizing agent. The effects of polyol constituent on the average particle size and distributions, morphologies, color strength, and friction fastness of core‐shell particles were investigated to design microcapsule. The friction fastness of printed fabrics with EVA core‐PU shell microcapsules became the increase to 4–5 grades. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 893–902, 2007     

高渗透稠油油藏氮气泡沫驱现场实践与认识

八面河油田面14区沙河街组沙三上段属于高孔高渗透普通稠油油藏,受储层非均质性,注水、边水推进等原因,在油田开发过程中表现出含水上升快,产量自然递减快,采出程度低的开发特点。针对高渗透稠油油藏特高含水开发初期稳油控水,2007年开展了整体氮气泡沫驱现场试验,取得了显著的控水增油效果,投入产出比为1∶7.0。研究结果对于同类油田氮气驱提高采收率具有一定的借鉴意义。     

阻燃剂对软质聚氨酯泡沫燃烧特性的影响

利用锥形量热仪对添加了不同阻燃剂的软质聚氨酯泡沫，在25kW／m^2下，其热释放速率、产烟量、一氧化碳产生量、二氧化碳产生量和点燃时间等进行了试验研究。结果表明，含氯化铵的聚氨酯泡沫燃烧时热释放速率最小，仅是未经阻燃处理的聚氨酯泡沫的热释放速率的11．5％；含硫酸铵的聚氨酯泡沫的产烟量最少，仅是未经阻燃处理的聚氨酯泡沫的产烟量的6．4％；含氯化铵的聚氨酯泡沫燃烧时产生的一氧化碳和二氧化碳都是最少的，分别是未经阻燃处理的聚氨酯泡沫的2，4％和1．6％；点燃时间最长的是含四硼酸钠的聚氨酯泡沫，几乎是未经阻燃处理的聚氨酯泡沫的15倍，其它阻燃剂对聚氨酯泡沫的燃烧性能都有不同程度的影响。     

Properties and pervaporation separation of hydroxyl‐terminated polybutadiene‐based polyurethane/poly(methyl metharcylate) interpenetrating networks membranes

Hydroxyl‐terminated polybutadiene (HTPB), 4,4′‐dicyclohexyl methane diiscyanate (H₁₂MDI), and 1,4‐butane diol are used to synthesize polyurethane (PU) solutions by two‐stage process. Interpenetrating networks (IPNs) of HTPB‐based PU and poly(methyl methacrylate) (PMMA) with HTPB/MMA (wt/wt % ratio) = 2.0, 1.5, 1.0, 1.5, 0.8, and 0.6, which are designated as IPN1 to IPN5, respectively, are synthesized by sequential polymerization technique. Thermal properties, tensile strength, and contact angle of membranes increase with the increase of MMA content, while the elongation of membranes show the reverse trend. Characterization of membranes are investigated by C?C/C?O absorption ratio and infrared absorption frequency shiftment. These PU and IPN membranes are used for the separation of ethanol/water and isopropanol/water solution by pervaporation test. IPN3 membrane possesses the largest pervaporation permeability and the separation factor. The pervaporation results of ethanol/water feed has the same trend as that of isopropyl alcohol (IPA)/water solution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Thermo gravimetric analysis and morphological behavior of castor oil based polyurethane–polyester nonwoven fabric composites

Castor oil (CO) based polyurethane (PU)– polyester nonwoven fabric composites were fabricated by impregnating the polyester nonwoven fabric in a reactive composition containing CO and diisocyanate. Composites were fabricated with two different isocyanates such as toluene‐2, 4‐diisocyanate (TDI) and hexamethylene diisocyanate (HMDI). Thermogravimetric analysis (TGA) studies of the composites were performed to establish the thermal stability and their mode of thermal degradation. It was found that degradation of neat PU takes place in two steps and that of polyester nonwoven fabric reinforced PU composites takes place in three steps. From the TGA thermograms, a little improvement in thermal stability incase of polyester nonwoven fabric reinforced PU composites were noticed compared to unreinforced PUs. Degradation kinetic parameters were obtained for the composites using Broido, Coats and Redfern, and Horowitz and Metzger methods. Tensile fractured composite specimens were used to analyze the morphology of the composites by scanning electron microscopic technique. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

有机硅消泡剂的应用

阐述了消泡剂的作用机理 ,综述了几种主要的有机硅消泡剂体系的性能及其应用     

A comparative study of dust control practices in Chinese and Australian longwall coal mines

Mine dust is one of the main hazards in underground longwall mines worldwide.In order to solve the mine dust problem,a significant number of studies have been carried out regarding longwall mine dust control,both in China and Australia.This paper presents a comparative study of dust control practices in Chinese and Australian longwall mines,with particular references to statutory limits,dust monitoring methods and dust management practices,followed by a brief discussion on the research status of longwall mine dust control in both countries.The study shows that water infusion,face ventilation controls,water sprays,and deep and wet cutting in longwall shearer operations are commonly practiced in almost all underground longwall mines and that both Chinese and Australian longwall mine dust control practices have their own advantages and disadvantages.It is concluded that there is a need for further development and innovative design of more effective dust mitigation products or systems despite the development of various dust control technologies.Based on the examinations and discussions,the authors have made some recommendations for further research and development in dust control in longwall mines.It is hoped that this comparative study will provide beneficial guidance for scholars and engineers who are engaging in longwall mine dust control research and practice.