羧基偏氯乙烯丁苯胶乳粒子的相态结构和应用性能

以过硫酸铵为引发剂，十二烷基硫酸钠为乳化剂，采用种子聚合工艺，合成了偏氯乙烯质量分数为２３％～４３％的羧基偏氯乙烯丁苯胶乳。通过电镜观察到所合成的胶乳粒子具有核－壳结构。通过测定胶闰子表面层的羧基数量，研究了羧基的分布，结果表明，羧酸种类对羧基在胶乳粒子中及在聚合体系中的分布有重要影响，该胶乳作为地毯背衬粘合剂，具有粘合力高，极限氧指数高的特点，是一种较好的阻燃性粘合剂。     

水乳剂用壬基酚聚氧乙烯配磷酸酯的合成

以壬基酚聚氧乙烯醚(TX-10)、P2O5为原料,合成了水乳剂壬基酚聚氧乙烯醚磷酸酯。通过对还原剂用量等因素的讨论,确定最佳工艺条件为:次亚磷酸钠用量为TX-10的0.4%,n(TX-10)∶n(P2O5)∶n(H2O)=2∶1∶0.8,反应温度60℃,反应时间5h。在此条件下产品的酯化率为96.84%。     

丙烯酸酯类共聚物乳液的研究进展

聚丙烯酸酯乳液是一大类容易制备、性能忧良、应用广泛且符合环保要求的聚合物乳液。本文系统地讨论了丙烯酸酯类共聚物乳液合成的配方设计，如单体、引发剂、乳化剂、PH调节剂、链转移剂以及保护胶体等微量组份的性质、在制备过程中所起的作用以及对制备所得共聚物乳液结果的影响；阐述了核壳乳液聚合、无皂乳液聚合、有机—无机复合乳液聚合、基团转移聚合、互穿网络聚合以及微乳液聚合与超微乳聚合等新型丙烯酸酯类共聚物乳液聚合技术；并简要介绍了丙烯酸酯类共聚物乳液在建筑涂料及胶粘剂领域的应用。     

Concentrated emulsion polymerization for preparation of β‐cyclodextrin‐supported chromatography columns

Concentrated inverse emulsion polymerization was used for making chromatography columns (based on crosslinked polystyrene divinylbenzene (PS‐DVB)) with pore sizes less than 10 μm. According to DSC‐thermal gravimetry thermograms, it was confirmed that the residual monomer concentration after polymerization process is negligible. For application of these columns in chiral chromatography, the β‐cyclodextrin is chemically fixed on the PS‐DVB resin pore surface. The presence of hydroxyl groups in the PS‐DVB resin after chemical modification was confirmed by FTIR spectroscopy. By chemical modification of the PS‐DVB resin, thermal stability increased up to 446°C. The structure of columns was analyzed by scanning electron microscopy (SEM). SEM evaluations showed that the porous structure of PS‐DVB resin was maintained intact after the chemical modification with β‐cyclodextrin. According to X‐ray data, presence of the crystalline domain that is related to β‐cyclodextrin is confirmed.© 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 857–863, 2006     

α─甲基苯乙烯和丙烯腈乳液共聚研究

本文用α─甲基苯乙烯（α—ＭＳ）和丙烯腈（ＡＮ）为主要原料，用乳液聚合技术合成了α—ＭＳ—ＡＮ共聚物．主要研究了乳化剂种类和用量、引发剂用量、单体的不同加料方式和配比对聚合的影响．同时考察了单体的不同配比对共聚物性能的影响．并通过ＩＲ等手段对共聚物进行了表征，最终得到了令人满意的α—ＭＳ—ＡＮ共聚物。     

伊朗轻质原油减渣馏分油水界面张力的研究

The vacuum residual from Iranian Light crude oil are separated into a series of 16 narrow fractions according to the molecular weight by the supercritical fluid extraction and fractional (SFEF) technology. The chemical element and the UV spectrum of each fraction are analyzed. The effects of several factors on the interfacial tension are investigated, which are the fraction concentration in oil phase, the ratio of oil component, the salts dissolved in the water phase and the pH value. The interfacial tension decreases rapidly as the concentration of the residual fraction in the oil increases, showing a higher interfacial activity of the fraction. The interfacial tension changes, as the amount of absorption or the state of the fractions in the interface changes resulting from different ratios of oil, different kinds or concentrations of salts in water, and different pH values. It is concluded that the intrfacial tension changes regularly, corresponding to the regular molecular parameters of the vacuum residual fractions.     

有机硅乳液中挥发性物质的测定

根据固相微萃取原理,对萃取条件进行了优化。优化后的HS-SPME-GC-MS(顶空固相微萃取/气相/质谱)实验条件为:采用85μm PAA纤维萃取头,萃取时间30min,萃取温度室温,解吸时间5min。在此条件下对3种有机硅乳液进行分析,通过计算机数据系统(质谱数据库NIST和Willy)检索及人工谱图解析,鉴定了非硅油挥发性成分。该方法的相对标准偏差为0·57%~2·59%。     

丙烯酰胺与2-丙烯酰胺基-2-甲基丙磺酸反相乳液聚合的研究

采用Span-80为乳化剂，白油为分散介质，（NH4）2S2O8-Na2SO3为引发剂，研究了丙烯酰胺（AM）与2-丙烯酰胺基-2-甲基丙磺酸（AMPS）的反相乳液共聚反应，合成出了高相对分子质量的共聚物。讨论了引发剂用量、乳化剂用量、水油比、单体浓度等因素对共聚物相对分子质量的影响。引发剂用量为单体质量的0．2‰，乳化剂为油相的6．7％，水油比为1：1．5，单体浓度为37．5％时可获得高相对分子质量的共聚物，且聚合反应平稳易控制。     

水性核（PMMA）／壳（PU）聚氨酯丙烯酸酯杂化乳液的合成研究

合成高Tg低成膜温度的水性聚氨酯丙烯酸酯杂化乳液,研究了合成工艺、—N CO和—O H的比例、丙烯酸酯含量等因素对乳液稳定性和其他性能的影响。     

乳状液膜法分离二元氨基酸的研究

定义了乳状液膜法分离氨基酸的分离系数，并以苯丙氨酸(Phe)／天冬氧酸(Asp)作为研究对象，探讨了影响分离系数的主要因素。研究结果表明：用稳态条件下液膜体系中两种氨基酸的传质通量之比定义两种氨基酸的分离系数，能够较全面反映两种氨基酸及液膜体系所具有的特性以及影响分离系数的复杂因素，为改善分离效果提供理论指导。对于采用酸性萃取剂为载体的液膜体系来说，pH值是影响两种氨基酸分离系数的主要因素，而载体浓度对分离系数的影响程度相对较小。