削弱或抑制抗氧剂、光稳定剂作用的有关因素

介绍了削弱或抑制抗氧剂、光稳定剂作用的常见因素及实例，分析了防老化塑料制品发生提前老化现象的可能性和原因。     

Molten salts/ceramic-foam matrix composites by melt infiltration method as energy storage material

A new type of high temperature energy storage material was obtained through the melt infiltration method, using compounding SiC ceramic foam as matrix and Na₂SO₄ as phase change material. The resulting composite material was measured by XRD, SEM, TG-DSC methods. The experimental results indicate that the composite is composed of silicon carbide, sodium sulfate and square quartz, and no chemical reactions occurs between Na₂SO₄ and SiC matrix. Na₂SO₄ has a good bonding with the SiC ceramic foam matrix. As the composite material is characterized by high thermal energy storage density and high thermal conductivity, it is suit for energy storage under high temperature. Funded by the “863” Hi-Tech Research and Development Program of China (2008AA05Z418)     

大口径光学透镜瞬态温度场模拟

为考察热辐射效应对光学元件稳、瞬态温度场的影响,给出了考虑辐射和导热耦合换热情况下复杂几何结构光学透镜稳、瞬态热特性的适体坐标下离散坐标法.对喷管形和圆柱形介质进行计算并与其他方法比较表明,建立的适体坐标系下辐射与导热耦合换热计算方法精度较好.对两端为球缺中间为圆柱的大口径透镜内的辐射与导热耦合换热过程进行了数值模拟.计算结果表明,为了精确地预测半透明介质如透镜内的温度分布,应该考虑辐射与导热耦合作用,且应当考虑介质的光谱特性.     

开封引黄灌区灌溉条件下稻田土壤盐分阈值研究

结合各生育期水稻耐盐度、各处理实际种前初始土壤含盐量和对应生育期最高的土壤含盐量,分析了各灌溉处理条件下的稻田土壤含盐量在水稻各生育期的动态变化规律和允许初始土壤含盐量阈值.结果表明:控制灌溉及控制灌溉加淋洗条件下,各水稻生育期土壤含盐量均有不同程度降低,随着淋洗水量的增加土壤含盐量逐渐降低,并获得了不同灌溉方式下的允许稻田初始土壤含盐量阈值.此结论对实际应用有指导意义.     

锡崖沟瀑布景观工程水力模型试验研究

根据锡崖沟景区规划设计,沿锡崖沟水库溢洪道下部开凿底洞引水,在水库下游红岩大峡谷常年形成20 m宽大瀑布.以满足瀑布流的重力和紊动阻力相似的原则进行了其正态模型设计.通过模型放水试验表明：流量变化对瀑布水流流态影响很大,溢流槽空间狭小,加之上游进口扇形扩散段扩散角偏大,水流扩散不充分,堰顶溢流不均匀,瀑布景观效果差.将模型的溢流堰顶修改为T型复式断面后,顺应了水流的流动特性,在各级流量下均能获得比较好的瀑布景观效果.     

Formation mechanism of subtrenches on cone-shaped patterned sapphire substrate

In this paper, the cone-shaped patterned sapphire substrates (PSS) were etched by an inductively couple plasma with BCl 3 as the reacting gas. The influence of the operating pressure and the RF bias power on subtrenches of the cone-shaped PSS and the formation mechanism of subtrenches were investigated. The profiles of patterns were characterized by FESEM (field emission scanning electron microscope). It showed that the subtrench size varied with the operating pressure and the RF bias power. As the operatin...     

无烟煤熔融盐催化气化反应特性研究

根据煤催化气化原理及熔融盐特性,设计了一套小型熔融盐催化煤气化实验装置。针对无烟煤燃烧特性差的特点,在实验中研究了温度和二氧化碳流量对气化结果的影响,并对影响机理进行分析。     

基于积分法的热非平衡效应下剪切液膜流的表面波演化模型

当液膜表面同时存在热非平衡效应和切应力作用时,引发液膜流动不稳定的扰动及其影响将更为复杂。基于边界层理论,通过建立气液界面受热非平衡效应和切应力耦合作用的液膜流动的理论模型,采用包含弱非线性项的积分法,推导出热非平衡效应下剪切液膜流的表面波积分演化模型,模型中包括了相变强度、切应力、雷诺数和倾斜角度等不同参数的影响,为分析复杂边界条件下的液膜流的演化特征和稳定性提供了一种可借鉴的理论模型。     

Antioxidizing component,musizin, inrumex japonicus houtt

A substance with antioxidant properties was obtained from the hexane extract of roots ofRumex japonicus Houtt. The active component of the hexane extract was isolated and characterized as 2-acetyl-1,8-dihydroxy-3-methyl naphthalene, trivially named musizin (MUS). The antioxidant activities of MUS in six types of fats and oils were higher than that of butyl hydroxyanisole (BHA) and δ-tocopherol (δ-TOC). Together, TOC and MUS have a synergistic effect, because comparable amounts of either had lower antioxidant activity than various combinations of the two antioxidants. When we studied the antioxidant properties of a mixture of MUS and δ-TOC with methyl linoleate (MeLH), we found that the rates of destruction of the two antioxidants were comparable, but that their destruction occurred sequentially, with MUS first followed by δ-TOC, after which the oxidation of MeLH quickly occurred. Comparison of the antioxidant activity of MUS and its analogs suggests that only one of the two hydroxyl groups in MUS is involved in its antioxidant activit. Intermolecular hydrogen bonding may be involved.     

Loss of Curing Agent During Thin Film (Droplet) Curing of Thermoset Material

Recently, it has been reported by our group and others^1.2 that loss of curing agent is encountered during the curing of small droplets or thin films of amine cured epoxies. In our earlier study³ results were reported on loss of curing agent in small droplets used in conducting the rnicrobond, single fiber test for determination of interfacial shear strength (ISS). It was reported that use of a volatile curing agent (meta-phenylene diamine (m-PDA) with DGEBA resin) resulted in increasing amounts of curing agent being lost (as measured by T₈ of the cured droplets) with decreasing droplet size during the processing procedure. Droplets smaller than 150 micrometers were seen to lose up to 40% of the curing agent leading to alteration of the mechanical properties of the droplet and, therefore, causing measured values of ISS to be exceedingly low. Use of a less volatile curing agent (Jeffamine 700, a polyether diamine, Texaco Specialty Chemicals) in combination with DGEBA resin produced results which indicated that loss of curing agent was not occuring. This study was undertaken to show the relationships between film (or droplet) size and the amount of curing agent lost (during the processing) for three different aminecured epoxy systems.