Gasification reactivity of charcoal with CO2. Part I: Conversion and structural phenomena

The gasification reaction of fir charcoal with CO₂ was studied by isothermal thermogravimetric analysis under kinetic control. The derived reaction rate (r=dX/dt) as a function of the converted carbon mass (X) was compared with random pore model predictions and found to be much higher at elevated conversion levels than predicted by theory. Similar enhanced reaction rate behaviour was evidenced after removing the natural alkali catalyst from the charcoal by acid washing, suggesting that with untreated charcoal the late reaction rate contribution stems from both, catalytic and additional structure effects. Literature attributes the unpredicted late reaction rate behaviour to the disintegration of the porous char particle into small fragments, which, in line with percolation theory predictions, seems to occur only after a critical conversion level has been reached. However, our gasification data reveal a gradual rise in the charcoal reactivity thereafter, suggesting a breaking up (embrittlement) of the solid phase accompanied by the exposure of fresh surface area from fracturing. The original random pore model derivation given by Bhatia and Perlmutter is extended to account also for these peculiarities and the resulting kinetic relation described our reaction rate data well over the entire conversion range.     

裂纹梁动态响应有限元分析中的线弹簧模型

本文提出了一种以线弹簧模型为基础来分析裂纹梁动态响应的新数值方法．应用能量原理和断裂力学理论首次建立了线弹簧模型的刚度矩阵，从而确立了一种能使二维裂纹问题转化为一维分析的梁的有限元模型．使用这个模型，研究了不同裂纹长度和裂纹位置对悬臂梁固有频率和振型的影响，并把计算所得到的数值结果与现有的实验数据作了比较．结果表明，当无量纲裂纹长度小于０．６时，两者吻合得非常好；反之，两者之间存在较大的误差．对这种误差产生的原因，本文也作了解释．     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

Handling of fine-particles by time-averaged particle driving method in plasmas

We developed a noble technique for the fine-particle handling in plasmas. In this method a pair of point electrodes are introduced in the plasma, to which positive pulses are applied alternatively. When the pulse repetition period is shorter than the particle response time, the particles feel only time-averaged force because of their large mass. Spatial profile of the equivalent potential of the time-averaged force varies from a circle to an ellipse with an increase in the local discharge at the electrodes. The particles are eventually transported toward a middle point between two point-electrodes, being almost independent of their initial positions. This method is quite effective for converging fine particles in the plasma.     

近终形薄带连铸工艺技术比较

近终形薄带连铸是钢铁工业简化工序，节能降耗，降低成本最具有竞争能力的一项重大新工艺技术，本文报导了世界各先进工业国近年来开展研究的最新成果，分析比较了诸多机型的优缺点，并提出了突破工艺技术的技术关键和建议。     

DB590钢焊接冷裂纹敏感性的研究

超低碳贝氏体钢是具有高强度高韧性的新型钢种，它的合金元素含量少，含碳量又低，具有较好的焊接性能。采用插销试验研究了ＤＢ５９０钢焊接冷裂纹敏感性，同时用扫描电镜分析该钢插销试样的冷裂纹断口形貌。试验表明该钢具有优良的抗冷裂性能。     

针尖轮廓飞象扫描检测方法研究

分析了目前我国几种针尖轮廓检测方法、特点和存在问题。提出了一种针尖飞象自动检验方法，其原理是：被检测的针尖和探测器不动，利用转镜系统扫描针尖，产生针尖各部的时序象（飞象），这些依次出现的象受到探测器检测，即可获得反映针尖轮廓的一串直径信息。文中还对飞象扫描法的误差进行了分析和讨论。     

Plasma lens experiment at the final focus test beam

The proposed plasma lens experiment at the Final focus Test Beam (FFTB) facility of the Stanford Linear Accelerator Center has been approved by the adminstration. The experiment would allow the examination of plasma focusing devices for particle beams in the parameter regime of interest to future high-energy colliders. It is expected to lead to compact plasma lens designs capable of focusing the beam to unprecedented small spot sizes.     

用过零时间法分析的中能重离子探测器望远镜

本文描述了中能重离子探测器望远镜ＮＥ１０２Ａ＋ＣｓＩ（Ｔｌ）＋ＰＭＴ采用过零时间的方法鉴别粒子，实验结果表明可清楚地分辨ｐ、ｄ、ｔ同位素和探测到的全部碎片。     

20keV～17MeV中子能谱测量

基于质子反冲方法，建立了一套宽能区，高效率的中子谱仪系统，分别用三支充不同气压氢和甲烷的球形正经计数管和一个有机闪烁探没器分段测量２０ｋｅＶ～１７ＭｅＶ的中子能谱，为了去除γ射线本底，对两种探测器分别采用了两种不同的脉冲形状别技术，谱仪直接测量的是中子在探测器中产生的反冲质脉冲幅度谱，通过解决矩阵方程的方法得到中子谱，解谱中所用的各个探测器的中子响应矩阵均蒙特－卡洛方法计算得到，谱仪在全能区的中子