高输入功率因数的三相无源AC-DC变换器

对于采用三相不控整流桥作为前级的变换器，自然条件下其输入电流波形系数不高，使得输入功率因数委低，降低了电源的利用率。为此需要采用功率因数提高技术，其中无源PFC是一类重要的功率因数校正技术，在某些场合非常具有应用价值。本文介绍了几种三相无源AC-DC变换器的高功率因数方案，如采用LC滤波器、移相电抗器，谐振电抗器，移相变压器，相间变压器，相间电抗器等，在进行简单的工作原理描述后，给出了部分方案的MATLAB/SIMULINK仿真结果。     

Emission Of Volatile And Semivolatile Organic Compounds From Waterborne Paints – The Effect Of The Film Thickness

A waterborne paint was applied to tin plated steel sheets with three different film thicknesses. The emission of volatile and semivolaile organic compounds ((S) VOCs) from the samples was measured in small climatic chambers under standard conditions over a two-week period. The purpose of the study was to evaluate the effect of the film thickness on the emission rate decay. First order decay models, including sink effects for the high boiling (S) VOCs, were fitted to the concentration versus time data. The results showed that the first order rate constants decrease with increasing film thickness. In uddition, the results indicated that the emissions of the (S)VOCs in the waterborne paint film seemed to be controlled by evaporation. The thicknesses of paint films used in climatic chamber tests to estimate emission rates for product compurison or emission prediction must be known in order to prevent erroneous conclusions     

旋转式伽玛刀的辐射剂量学

旋转式伽玛刀的辐射剂量学指标的物理测试在放射性医疗设备投放医院正式临床使用前是必不可少的，是对设备及其附件的设计、加工制造、安装以及电气控制系统等的全面综合性检定。用电离室作辐射剂量学的绝对测量，用胶片法进行相对测量，给出了测量结果并进行了讨论。     

Cr/SiO_2界面还原反应研究

利用俄歇电子能谱研究了Cr／SiO2薄膜在热处理过程中的界面扩散反应机理、界面反应动力学过程及界面反应产物。研究结果表明，Cr／SiO2体系的界面还原反应主要是Cr与SiO2的反应，其还原反应产物是CrSix和Cr2O3物种。界面还原反应的速度与反应时间的平方根成正比，其界面还原反应过程受Cr向SiO2层的扩散过程所控制，界面还原反应的表观活化能为72．5kJ／mol（约0．75eV）。     

宽带被动导引头天线系统性能分析

详细讨论了宽带被动导引头中的关键部件－超宽频带天线的性能，并在此基础上分析了三种具备大视角特性的被动测角方法。由于宽带天线没有确定的相位中心，因此不能采用通常的振幅和差式单脉冲法进行宽频带测角。本文提出的波束运算网络可用于一个宽带螺旋天线同时得到两个交叉波束的振幅－振幅式单脉冲系统中。此外，对比幅相干测向法中的测角模糊问题也进行了研究。     

Characterization of CuInS2 thin films for solar cells prepared by spray pyrolysis

We have made a study of the chemical composition, the electrical, the optical and the structural properties of polycrystalline CuInS₂ thin films prepared by spray pyrolysis to be used for thin film solar cells. These films were deposited starting from aqueous solutions with different chemical compositions ([Cu]/[In] and [S]/[Cu] ratios) and at different substrate temperatures. In all cases, the material is p-type with grains preferentially oriented in the (112) direction of the sphalerite structure. The electro-optical properties show a very strong dependence on the [Cu]/[In] ratio in the solution. Films with copper excess have smaller resistivity and better crystallinity than those which are stoichiometric or have indium excess. The results obtained in this work show the possibility of having CuInS₂ thin films with a wide range of resistivity, a fact that could be important for making solar cells based on this material.     

The reality of living in passive solar homes: A user-experience study

This paper presents a study of a user-experience survey about living in passive solar homes. It was carried out at the Energy Park located in the western part of Milton Keynes. The survey focuses on the reality of living in passive solar homes as perceived or experienced by the occupant. It is hoped that the findings would come to bear on strategic passive solar design decisions that would address the improvement of the well-being of the occupant.. The survey is aimed at assessing user satisfaction with the overall performance of their homes as well as a study of some of the problems that are believed to be common in passive solar housing.Results from the survey seem to indicate that the majority of those who buy passive solar homes are motivated to do so by a desire for thermal comfort at low cost. The building aesthetics is the second most important factor, showing that passive solar home lovers are also conscious of the quality of the architectural design. The overall performance of passive solar homes in this study, with regard to thermal and visual comfort, seems to be generally satisfactory. Statistical analysis showed some significant association between some important environmental design parameters.     

Energy use in the life cycle of conventional and low-energy buildings: A review article

A literature survey on buildings’ life cycle energy use was performed, resulting in a total of 60 cases from nine countries. The cases included both residential and non-residential units. Despite climate and other background differences, the study revealed a linear relation between operating and total energy valid through all the cases. Case studies on buildings built according to different design criteria, and at parity of all other conditions, showed that design of low-energy buildings induces both a net benefit in total life cycle energy demand and an increase in the embodied energy. A solar house proved to be more energy efficient than an equivalent house built with commitment to use “green” materials. Also, the same solar house decreased life cycle energy demand by a factor of two with respect to an equivalent conventional version, when operating energy was expressed as end-use energy and the lifetime assumed to be 50 years. A passive house proved to be more energy efficient than an equivalent self-sufficient solar house. Also, the same passive house decreased life cycle energy demand by a factor of three – expected to rise to four in a new version – with respect to an equivalent conventional version, when operating energy was expressed as primary energy and the lifetime assumed to be 80 years.     

Film and television industry cloud exhibition design based on 3D imaging and virtual reality

The three-dimensional virtual scene can provide users with a visual three-dimensional virtual environment, with various multimedia channels such as sound, video, force feedback equipment, etc., to bring users a completely immersive interactive experience. This paper introduces 3D imaging and virtual reality technology in the film and television industry cloud exhibition, and develops a virtual display platform. First of all, this paper divides the registration into two processes: camera calibration and joint calibration of the camera and laser scanner based on the calibration results. Camera calibration can determine the plane model of the calibration board in the camera coordinate system, and the joint calibration uses the RANSAC algorithm to extract the point cloud of the plane model of the calibration board, and then optimizes the distance between the points in the plane model point cloud and the corresponding plane in the camera coordinate system Find the optimal transformation between the two sets of data, and then calculate the registration relationship between the point cloud and the image. Secondly, this article conducts a demand analysis of the film and television industry cloud exhibition platform based on virtual reality technology, including the business goals set by the platform, platform system analysis, overall design, and system operating environment and configuration requirements. This model provides a feasible solution for the visual interaction of the cloud exhibition design of the film and television industry.     

实现多无线接入点网络连接模型的研究

本文提出一种负载均衡模型,此模型不仅考虑AP的信号强度,而且要考虑现有AP已接入无线工作站的数量还有连接质量因素。除此之外,还讨论了实现此模型的无线协议的扩充。