海藻酸纤维对Zn2+的吸附性能研究

研究了海藻酸纤维对Zn2+的吸附性能,对Zn2+浓度、温度、时间以及pH值等影响因素进行了分析。结果表明:吸附时间和温度对吸附平衡的影响较小,但Zn2+溶液的初始浓度和pH值的影响很大。初始浓度越大,吸附容量越大但去除率越小,pH值在5～7时去除率较大。Freundlich吸附模型比Lang-muir吸附模型能更好地模拟海藻酸纤维对Zn2+的吸附过程。     

Zn对AB5型贮氢合金的影响

研究了Zn替代Co对AB5型MlNi3.6Mn0.4Al0.3Co0.7贮氢合金相结构和电化学性能的影响。Zn替代Co使合金的晶胞参数和体积增大,导致贮氢合金最大放电容量增加,循环稳定性有所下降;随着Zn含量由0增加到0.5,氢的扩散系数由0.31×10-7m2/s增加到3.72×10-7m2/s,交换电流密度由157 mA/g增加到191 mA/g,合金极化电阻由1.23Ω减少到1.01Ω,合金表面电催化活性和高倍率性能得到了改善。     

Neurotoxicity of Chronic Co-Exposure of Lead and Ionic Liquid in Common Carp: Synergistic or Antagonistic?

Previous studies have indicated that the harmful heavy metal lead (Pb) contamination in aquatic systems has caused intelligence development disorders and nervous system function abnormalities in juveniles due to the increased permeability of the blood–brain barrier. Ionic liquids (ILs) are considered “green” organic solvents that can replace traditional organic solvents. Studies have found the presence of ILs in soil and water due to chemical applications or unintentional leakage. Therefore, what would happen if Pb interacted with ILs in a body of water? Could ILs enable Pb to more easily cross the blood–brain barrier? Therefore, we examined the combined exposure of Pb and ILs in common carp at low concentration (18.3 mg L⁻¹ of Pb(CH₃COO)₂•3 H₂O and 11 mg L⁻¹ of the IL 1-methyl-3-octylimidazolium chloride, 5% of their LC₅₀) for 28 days in the present study. The result of a neurobehavioral assay showed that chronic exposure of lead at lower concentrations significantly altered fish movement and neurobehaviors, indicating that lead exposure caused neurotoxicity in the carp. Increases in the neurotransmitter dopamine levels and injuries in the fish brain accounted for neurobehavioral abnormalities induced by lead exposure. Moreover, we also found that lead could easily cross the blood–brain barrier and caused significant bioaccumulation in the brain. Particularly, our study indicated that the ionic liquid could not synergistically promote blood–brain barrier permeability and hence failed to increase the absorption of lead in the fish brain, suggesting that the combined exposure of lead and ILs was not a synergistic effect but antagonism to the neurotoxicity. The results of this study suggested that ILs could recede the Pb induced neurotoxicity in fish.     

红色长余辉发光材料CaTiO3：Pr^3＋余辉性能的改进。

采用掺入Zn来改良红色长余辉发光材料CaTiO3：Pr^3＋的发光亮度及余辉性能．通过对该材料的X射线衍射谱、发光光谱和余辉衰减过程进行分析与测试,发现改变zn的掺入量对该发光粉体余辉性能的影响规律,当Zn^2＋的含量为15％～25％时,发光粉体具有最佳的余辉性质．     

四川盆西平原区裸土扬尘中Pb、Cd化学形态的生物有效性

为探究四川盆西平原区裸土扬尘中Pb、Cd总质量分数与其生物有效性的规律,在构建的"阳离子型污染物土壤表层运移行为研究系统"内进行模拟起尘试验,对土壤样品进行Pb、Cd模拟污染试验,结果表明:试验条件下,四川盆西平原区裸土扬尘颗粒物中Pb、Cd的总质量分数随着粒径的减小而增大,其中Pb的化学形态以碳酸盐结合态为主(44....     

Effect of phosphoric acid on the performance of low antimony grid of Pb‐acid cell under constant current charging and discharging

Effect of phosphoric acid on the performance of Pb‐1.7%Sb grid of lead‐acid cell is studied in 5 M H₂SO₄ by cyclic galvanostatic polarization and impedance spectroscopy. An increase in capacitance to a maximum is recorded during the initial stages of the electro‐reduction of PbO₂ into Pb(II) compounds and attributed to concurrent compositional and dimensional changes. These changes include removal of O₂ bubbles, insertion of large amounts of H₂SO₄ and H₂O. Efficiency of PbO₂ formation decreases, while its rate of self‐discharge increases with increasing the charging current and in the presence of H₃PO₄. The charge capacity increases with increasing the discharging current due to the decrease in the self‐discharge. The charge capacity is lower in the presence of H₃PO₄. On increasing the cycle number, the corrodibility of the grid increases, because more layers of the surface Pb are involved in the self‐discharge. H₃PO₄ significantly retards the effect of cycle number.     

Sputtered Zn(O,S) buffer layers for CIGS solar modules—from lab to pilot production

Sputtering of Zn(O,S) from ZnO/ZnS compound targets has been proven to be a promising buffer layer process for Cd‐free CIGS modules due to easy in‐line integration, low cost and high efficiency on lab scale. In this publication, we report on successful upscaling of the lab process to pilot production. A record aperture efficiency of 13.2% has been reached on a 50 × 120 cm² sized module. Neither a non‐doped ZnO layer nor additional annealing steps are required. Moreover, this very reproducible process yields a standard deviation comparable with that of the CdS base line. In contrast to lab experiments, strong performance gain after light soaking has been observed. The light‐soak‐induced power increase depends on the preparation of the window layer. Accelerated aging tests show high stability of module power. This is confirmed by outdoor testing for 20 months. Copyright © 2017 John Wiley & Sons, Ltd.     

锡合金镀层的晶须抑制效果及其机理

概述了无铅锡合金镀层的概要,锡合金镀层的晶须评价试验,以及Sn-Pb合金镀层和无铅合金镀层的晶须抑制机理。     

Stable Zinc Metal Anodes with Textured Crystal Faces and Functional Zinc Compound Coatings

The uneven electrodeposition and inferior corrosion resistance are the fundamental obstacles to achieve stable Zn metal anodes. The features of the electrode surface/interface are closely correlated with the properties. Herein, the Zn surface with more exposed (002)_Zn planes is modified through a simple acid-etching approach. The in situ generated zinc compounds form an interface layer with strong adhesion to the Zn electrode, which can enhance the Zn²⁺ ion kinetics and regulate the deposition/dissolution behaviors. A variety of acids with functional cations are selected, among which the phosphoric acid etches the Zn with a higher extent of texturing and generates a more compact layer. The obtained zinc phosphate@Zn electrode enables stable cycling and fast kinetics in symmetrical and full Zn metal batteries. This study provides a new example of combined surface and interface modification toward high-performance aqueous zinc metal anodes.     

Ultrathin and Ultralight Zn Micromesh-Induced Spatial-Selection Deposition for Flexible High-Specific-Energy Zn-Ion Batteries

Ultraflexible and ultralight rechargeable aqueous Zn-ion batteries (ZIBs) with the merits of environmental benignity and high security arise as promising candidates for flexible electronic systems. Nowadays, the energy density and cyclical stability of ZIBs on metal-based rigid substrates reach a satisfactory level, while the inflexible substrates severely prevent them from widespread commercial adoption in portable electronics. Although flexible substrates-engineered devices burgeon, the development of flexible ZIBs with high specific energy still faces great challenges. Herein, a flexible ultrathin and ultralight Zn micromesh (thickness of 8 µm and areal density of 4.9 mg cm⁻²) with regularly aligned microholes is fabricated via combining photolithography with electrochemical machining. The unique microholes-engineered Zn micromesh presents excellent flexibility, enhanced mechanical strength, and better wettability. Moreover, numerical simulations in COMSOL and in situ microscopic observation system certify the induced spatial-selection deposition of Zn micromesh. Accordingly, aqueous ZIBs constructed with polyaniline-intercalated vanadium oxide cathode and Zn micromesh anode demonstrate exceptional high-rate capability (67.6% retention with 100 times current density expansion) and cyclical stability (maintaining 87.6% after 1000 cycles at 10.0 A g⁻¹). Furthermore, the assembled pouch cell displays superb flexibility and durability under different scenarios, indicating great prospects in high-energy ZIBs and flexible electronics.