Investigations of water inrushes from aquifers under coal seams

In many coal mines, limestone-confined aquifers underlie coal seams. During coal extraction from these mines, water inrushes occur frequently with disastrous consequences. This paper introduces the hydrogeological conditions of the coal mines and the potential water inrush disasters from aquifers under coal seams. It then presents the water inrush mechanism. The main factors which control water inrushes include strata pressure, mining size, geologic structures and the water pressure in the underlying aquifer. Analysis shows that reduction of confinement due to mining is the major cause of the water-conducting failure in the floor strata. The depth of the failure zone is strongly dependent on the mining width. This paper also presents field observation results of the water-conducting failure in the floor strata, and applies the finite element method coupled with stress-dependent permeability to analyze hydraulic conductivity enhancement due to coal extraction. Finally, theoretical and empirical methods to predict water inrushes are given, and technical measures for improving mine design and safety for coal extraction over aquifers are presented. These measures include fault and fracture grouting and mining method modification such as changing long-wall to short-wall mining.     

屏蔽暂堵反排解堵效率的实验分析

在一定实验条件下，屏蔽暂堵的反排解堵效率随压差、温度的增大而增大，反排解堵在很短的时间内就可完成。一般的反排解堵率都在60％以上，但反徘不能完全解堵。     

Reynolds number-dependent permeability of wastewater sludge flocs

Most theoretical models assume constant permeability of wastewater sludge floc. This work shows that, at creeping flow limit with small intrafloc Reynolds number, the permeability of floc can not only be affected by floc structure, but also by the external flow condition. The three-dimensional structure of flocs using the fluorescence in situ hybridization (FISH) and the confocal laser scanning microscope (CLSM) was firstly probed. Then, the volumetric grid models for sludge flocs were constructed. We noted that the floc permeability could keep unchanged, increased, or decreased at increased Reynolds number (Re). Flow redistribution among channels of various sizes contributes to the noted Re-dependent permeability of flocs.     

Modelling of a gas flow measurement: Application to nuclear containment vessels

The objective of this work is to simulate the gas flow across a concrete wall of a nuclear power plant internal enclosure. In the laboratory, permeability measurements are generally made on cylindrical samples (15 cm diameter×5 cm height: ∅ 15×5 cm) with a steady-state experiment. To be able to predict structural behaviour, we studied size effect and steady-state time with a modified CEMBUREAU permeability test. A statistical approach showed that there is no size effect on concrete permeability. Laboratory results found on cylindrical samples can be applied to tests in situ, where concrete specimens are thicker. A model based on the mass balance relation provided times to reach steady state and reproduced experimental flow kinetics for uniform water content across specimens.     

高分子量聚合物的分子量对岩心渗透率的适应性研究

本文通过不同分子量的高分子量聚合物（部分水解聚丙烯酰胺）在不同渗透率岩心中的流动实验，研究了高分子量聚合物的分子量与岩心渗透率之间的匹配关系，为大庆油田采用高分子量聚合物驱油提供决策依据。     

Electromagnetic properties of ferroelectric-ferrite ceramic composites

The NiFe₂O₄ and Pb(Zr_0.52Ti_0.48)O₃ ceramic composites are prepared by conventional solid state reaction method. The microstructural and morphological properties of the composites are studied by X-ray diffraction analysis and scanning electron microscopy. Results indicate that the ferrite and piezoelectric phases can co-exist in the composites. The relationship between the dielectric constant and frequency (40 Hz–40 MHz) as well as temperature is also investigated. It is noted that the transition temperature of the composites is about 380 °C. A double electric hysteresis loop is observed in our composites. The magnetic properties are relatively weak according to the magnetic hysteresis loop. With increase in the content of the ferrite phase, the permeability increases. The electromagnetic properties of the as-prepared composites are tunable according to the content of the NiFe₂O₄ phase.     

Laboratory Evaluation of Smear Zone and Correlation between Permeability and Moisture Content

In this study, the extent of the smear zone and the reduction of permeability and water content within the smear zone were investigated using a large-scale consolidometer. The installation of vertical drains by means of a mandrel causes significant disturbance of the subsoil surrounding the mandrel, resulting in a smear zone. The extent of the smear zone for Moruya clay (New South Wales, Australia) was estimated on the basis of normalized permeability and the reduction of water content by taking undisturbed samples (horizontally and vertically) at different locations. This study reveals that a significant reduction in water content and horizontal permeability takes place towards the drain, whereas the variation in the vertical permeability is negligible. The smear zone for Moruya clay was found to be 2.5 times the equivalent radius of the mandrel with the horizontal permeability varying from 1.09 to 1.64, an average of 1.34 times smaller than that of the undisturbed zone. Finally, a correlation between the permeability decrease and water content reduction within smear zone is proposed.     

Gas Permeability of Wetwood and Normal Wood of Subalpine Fir in Relation to Drying

Subalpine fir (Abies lasiocarpa Hook) lumber containing wetpockets (wetwood) was used for the measurements of gas permeability and the results were then compared to the gas permeability of normal wood, which was free of the wetpockets. The impacts of pretreatment methods were also investigated, including steaming at green condition, steaming at fiber saturation point (FSP), microwave treatment, and radio-frequency treatment. Results from this study demonstrated that both the transverse and the longitudinal gas permeability of subalpine fir wetwood are greater than that of normal wood. There is no significant change in the permeability after 4-h steaming pretreatment at green condition and at FSP. The impacts of microwave and radio-frequency pretreatments were not significant, but the findings cannot be generalized because they may depend on the power intensity applied.     

Sorption of solvents in plastics and solvent desorption and retention

The experiments reported here have studied the following systems within the temperature range 25–50°C: sorption and desorption of solvents on LDPE, OPP, PS, rigid PVC, OPA, PETP and regenerated cellulose with methanol, ethanol, n-propanol, and ethyl acetate. With reference to these, the theory presented indicates the most important aspects related to the tests, refers to identification data on similar problems and enumerates the possibilities of interaction. The application of equation 1 and the reported measuring method allows the determination of diffusion coefficients within a vapour-saturated atmosphere system. As the gravimetric method also allows the determination of solubilities (α_L, the solubility coefficient), the permeation behaviour in the Fick range is calculable from The equation used by the author can be related to other equations from the technical literature, such as for the range Q_(t)Q∞>0.4, or where for the range <0.4 The agreement can be considered as good. The D values provide a calculation base within the scope of the outlined problem definition. The taste limits for solvents in water reveal which solvents could, as residual solvents, become critical. These values—connected with sorption/desorption identification values, evaporation numbers etc. —indicate where there is a risk and those cases where sufficient drying, or even the use of more adequate solvents is essential.