WF40防腐蚀涂料在原料水罐上的应用

中国石化股份有限公司洛阳分公司炼油厂污水汽提装置的原料水罐(V303)由于接触的污水中含有H2S,NH3,CO2,CN-,酚等多种腐蚀介质因此经常发生腐蚀泄漏事故。经涂刷WF40玻璃鳞片防腐蚀涂料后,已平稳运行两年。2002年检修检查,涂层完好,仍在继续使用。WF40涂料为环氧型玻璃鳞片涂料,其热膨胀系数与钢质基体接近,因此具有耐热冲击性强等优点。待涂罐体经喷砂除锈到Sa2.5级后,涂底漆2道,中间涂层2道、面漆2道,使干膜厚度达到350μm,可有效防止腐蚀性介质的渗透。     

Thermal and mechanical properties of epoxy composites reinforced by a natural hydrophobic sand

If a low weight percentage of crude fine fillers can improve properties of polymer materials directly without complicated chemical treatment process involved, it will be significant for many industrial applications. Our previous study indicated that a kind of Cancun natural sand could be an effective filler material for polymer composites. In this current work, the epoxy composites reinforced by this kind of natural sand particles were prepared and thermal and mechanical properties of the composites containing up to 5 wt % of the sand particles were characterized. Results showed that the highest flexural strength appears in the epoxy composite containing 1 wt % sand particles. A damage model was used to interpret the flexural properties, which showed an acceptable agreement with the experimental results. The glass transition temperature, high temperature storage modulus, and dimensional stability of the sand/epoxy composites monotonically increased with the addition of the sand particles. The sand particle/epoxy composites also displayed a noticeable enhancement in thermal conductivity. Theoretical analysis showed that in addition to conduction, other heat transport mechanisms played roles in the improved heat transmission through the composites. As a natural porous micron-scale material, Cancun sand has the potential for applications in cost-effective composites with enhanced mechanical and thermal properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Time and temperature effect on the linear–nonlinear viscoelastic transition threshold of a polymeric system

In the present study, the transition of a polymeric material from the linear to the nonlinear viscoelastic behavior and the determination of the nonlinearity stress threshold variation with time and temperature are investigated. For this purpose a systematic experimental program consisted of thermal and mechanical characterization of certain polymeric material followed by isothermal creep tests at different stress levels and temperatures was conducted. Through isochronal curves that occurred from creep tests, the nonlinearity threshold dependence on both time and temperature is presented. The reported results provide information that is critical for the design and development of polymer structures and components. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Determination of the content of wax esters in some sea foods and their molecular composition. A comparison with ω-3 enriched wax esters

Wax esters enriched in ω-3 fatty acids have been recently shown to be readily absorbed by rats after dietary supplementation. Wax esters are less prone to oxidation and can be better formulated than liquid ω-3 derivatives. All these characteristics suggest a possible use of wax esters enriched in ω-3 as food supplements. However, some naturally occurring wax esters are defined as scarcely digestible (jojoba oil, spermaceti). On the other hand, wax esters have been found in several sources of marine origin, which can enter normal foodstuff. In order to better understand the digestibility of wax esters, we have analysed some foods from marine sources. The content of triglycerides and wax esters of the foods has been determined. Moreover, wax esters have been analysed for their composition in alcohols and fatty acids. Wax esters have been shown to be a part of the neutral lipid extract of the foods analysed. Their content, if compared with the content in triglycerides, shows striking differences. In the case of two botargo preparations, it has been shown that wax esters are more than 90% of the total neutral lipid extract. The content of fatty acids and alcohols found in the foods analysed is consistent with published data.     

钛酸酯催化环氧树脂固化动力学研究

用FTIR“原位”技术,研究了钛酸酯(Tc-114)偶联剂对环氧E-44和二氨基二苯基甲烷(DDM)固化反应的催化作用,得出固化程度与时间的关系曲线。又根据DSC曲线,分别算出加有Tc-114和不加Tc-114的两个固化体系的反应表观活化能和反应级数。结果表明,Tc-114的存在使环氧固化反应活化能降低,催化作用明显。     

有机硅丙烯酸酯增深剂的制备及应用

由乙烯基三乙氧基硅烷与KH-550、丙烯酸酯类单体在阴/非离子表面活性剂存在下，通过乳液聚合制得带蓝光的半透明有机硅丙烯酸酯乳液．该乳液粘度小，有机硅质量分数15％，总固体质量分数30％，该增深剂既可单独使用，也可与氨基硅油乳液复配，经蓝色16电力纺、黑色03双绉等真丝产品增深，其增深度可达15％，但亲水性有所下降．     

离子交换法合成三氨基胍叠氮酸盐

三氨基胍叠氮酸（ＴＡＺ）分子中的含氮量高达８５．７％，燃烧分解时不仅－Ｎ３可释放３６７ｋＪ／ｍｏｌ的键能，而且放出大量的氮气，是一个提高比冲，降低燃烧温度的理想的推进剂两组分之一。     

镀锌层上有机物无铬钝化涂层的耐蚀性

选择了一种无毒的水溶性丙烯酸树脂（AC）加入至钼酸盐、磷酸盐中（M）得到一种钝化液（ACM），对镀锌层进行钝化处理以代替有毒的铬酸盐钝化。通过盐雾试验、扫描电镜、电化学测试等手段，研究了该纯化膜的耐蚀性及耐蚀机理。结果表明，热浸镀锌层采用该无毒钝化液进行钝化，可以推迟镀锌层出现白锈的时间，其抗蚀性已接近铬酸盐钝化水平；ACM钝化膜耐蚀性的提高是由于钝化膜中的钼酸盐与丙烯酸树脂产生交联作用，抑制钝化膜裂纹的扩展，同时由于膜层中钼酸盐的缓蚀作用，提高了镀锌层的抗蚀性。     

绿色润滑剂的生物降解性及特点

阐述了绿色友好润滑剂的生物降解性和摩擦化学特点，提出了绿色润滑剂在发展过程中存在的主要问题，并对未来的发展趋势进行了预测。     

丙烯酸酯类助剂ACR的生产简况及市场分析

概述了ACR的功能、生产简况及市场趋势。