Alkaline sulfite/anthraquinone pretreatment followed by disk refining of Pinus radiata and Pinus caribaea wood chips for biochemical ethanol production

BACKGROUND: Alkaline sulfite/anthraquinone (ASA) cooking of Pinus radiata and Pinus caribaea wood chips followed by disk refining was used as a pretreatment for the production of low lignified and high fibrillated pulps. The pulps produced with different delignification degrees and refined at different energy inputs (250, 750 and 1600 Wh) were saccharified with cellulases and fermented to ethanol with Saccharomyces cerevisiae using separated hydrolysis and fermentation (SHF) or semi‐simultaneous saccharification and fermentation (SSSF) processes. RESULTS: Delignification of ASA pulps was between 25% and 50%, with low glucans losses. Pulp yield was from 70 to 78% for pulps of P. radiata and 60% for the pulp of P. caribaea. Pulps obtained after refining were evaluated in assays of enzymatic hydrolysis. Glucans‐to‐glucose conversion varied from 20 to 70%, depending on the degree of delignification and fibrillation of the pulps. The best ASA pulp of P. radiata was used in SHF and SSSF experiments of ethanol production. Such experiments produced maximum ethanol concentration of 20 g L^?1, which represented roughly 90% of glucose conversion and an estimated amount of 260 L ethanol ton^?1 wood. P. caribaea pulp also presented good performance in the enzymatic hydrolysis and fermentation but, due to the low amount of cellulose present, only 140 L ethanol would be obtained from each ton of wood. CONCLUSION: ASA cooking followed by disk refining was shown to be an efficient pretreatment process, which generated a low lignified and high‐fibrillated substrate that allowed the production of ethanol from the softwoods with high conversion yields. Copyright © 2012 Society of Chemical Industry     

Prediction of Lignin and Extractive Content of Pinus nigra Arnold. var. Pallasiana Tree Using Near Infrared Spectroscopy and Multivariate Calibration

Abstract

Determination of quality parameters such as lignin and extractive content of wood samples by wet chemistry analyses takes a long time. Near infrared (NIR) spectroscopy coupled with multivariate calibration offers a fast and nondestructive alternative to obtain reliable results. However, due to the complexity of the spectra obtained from NIR, some wavelength selection is generally required to improve the predictive ability of multivariate calibration methods. Pinus nigra Arnold. Var. pallasiana is the second most growing pine species in Turkey. Even though its rotation period is very high, around 120 years, the forest products industry has widely accepted the use of Pinus nigra because of its ability to grow on a wide range of sites and its suitability to produce desirable products. In this study, 51 samples of Pinus nigra trees were collected and their lignin and extractive content were determined with standard reference (TAPPI) methods. Then, the same samples were scanned with near infrared spectrometer between 1000 and 2500 nm in diffuse reflectance mode. Multivariate calibration models were built with genetic inverse least squares method for both lignin and extractive content using the concentration information obtained from wet standard reference method. Overall, standard error of calibration (SEC) and standard error of prediction (SEP) were ranged between 0.35% (w/w) and 2.4% (w/w).     

Influence of Fungal Infection and Wounding on Contents and Enantiomeric Compositions of Monoterpenes in Phloem of Pinus sylvestris

To identify chemical resistant markers induced by fungal or mechanical injury, young trees of Scots pine (Pinus sylvestris) were subjected to inoculations of blue stain fungi associated with the pine shoot beetles Tomicus piniperda and T. minor. Among the 20 trees selected for chemical analyses, 16 were divided into four groups: one as control and three were pretreated by wounding only, or by inoculation with either the blue stain fungus Leptographium wingfieldii or Ophiostoma canum. Four wk after pretreatment, all 16 pretreated trees were mass-inoculated with L. wingfieldii. The absolute and relative amounts, as well as the enantiomeric compositions of monoterpene hydrocarbons in the phloem, were determined via a small sample of the phloem before and after the pretreatment and mass inoculation, by using two-dimensional gas chromatography (2D GC) and GC-mass spectrometry (MS). After mass inoculation, the absolute amounts of most of the monoterpenes decreased in the phloem sampled >20 cm from the fungal infection, and were higher in the phloem sampled within the infected reaction zone. The relative amounts of both (−)-β-pinene and (−)-limonene increased in phloem samples taken >20 cm above the fungal inoculation in the preinoculated trees compared with phloem sampled from the remaining four control trees. The enantiomeric compositions of β-pinene and limonene changed, after fungal growth, at defined distances from the inoculation site: the proportion of the (−)-enantiomers was highest in the phloem sampled >20 cm from the fungal inoculation. Four wk after pretreatment, monoterpene production in the phloem at the site of inoculation was more enhanced by L. wingfieldii than by O. canum. However, the different virulence levels of the fungi did not affect the enantiomeric composition of the monoterpenes. The biosynthesis of monoterpene enantiomers is discussed in relation to induced pathogen resistance.     

木聚糖酶对马尾松KP浆漂白机理的探索

采用常规分析方法对纸浆卡伯值、粘度和戊聚糖含量等进行分析 ,又采用紫外光谱、高效液相色谱、凝胶渗透色谱及扫描电镜等仪器分析方法分别对酶解浆、酶解液及酶解浆稀碱抽出液进行了分析。结果认为 ,木聚糖酶用于化学浆漂白的机理是其降解了残余木质素中的LCC结构和部分木聚糖 ,从而节省了后序化学漂剂的用量 ,提高了纸浆白度     

Triacylglycerol composition of Pinus koraiensis seed oil

The triacylglycerol (TG) composition of Pinus koraiensis seed oil, which contains Δ5 nonmethylene-interrupted (NMI) fatty acids (FA) (the main acid is pinolenic, 18:3 Δ5, 9, 12), was determined. TG were preliminarily separated by argentation thin-layer chromatography (TLC), and the obtained fractions were analyzed by high-temperature gas chromatography (GC) on a capillary column with methyl phenyl silicone phase. Additionally, high-performance liquid chromatography (HPLC) of TG was applied. The FA composition of all TG fractions was identified. The identification of TG was carried out by combining TLC, GC, HPLC, and calculated equivalent carbon numbers of TG standards. The TG species identification was confirmed by comparison of the theoretical recalculated and directly analyzed FA compositions of all TLC fractions of TG. Species of TG with unsaturation degrees of 1 to 7 and trace amounts of saturated and octaenoic TG species were found. Except for minor compounds, 26 TG molecular species of 32 main components were quantitatively determined. The main species were oleoyl dilinoleoylglycerol (14.7%), dilinoleoyl pinolenoylglycerol (10.7%), palmitoyl oleoyl linoleoylglycerol (8.3%), triolein (7.6%), and dioleoyl, linoleoylglycerol (7.4%). Seven TG species contained Δ5 NMI acyl groups. Of these, the major were dilinoleoyl pinolenoyglycerol (10.7%), stearoyl linoleoyl pinolenoylglycerol (6.5%) dioleoyl, pinolenoylglycerol (5.4%), and palmitoyl linoleoyl pinolenoyl-glycerol (5.5%). TG species with two or three NMI acyl groups were not detected.     

Terpene variations in maritime pine constitutive oleoresin related to host tree selection byDioryctria sylvestrella RATZ. (Lepidoptera: Pyralidae)

Gas chromatographic analysis of the volatile terpenes of the wood oleoresin of maritime pines showed that the relative proportions of terpenes within the same tree did not vary according to sampling height and date. Pruning and tree vigor did not affect terpene profiles, but oleoresin composition varied widely from tree to tree. The trees attacked byDioryctria sylvestrella contained a significantly higher percentage of limonene, longipinene, and copaene, and a discriminant analysis, using the relative percentage of six terpenes, significantly separated infested and uninfested trees. The olfactory sensitivity of adult moths to a series of 20 volatile chemicals, including maritime pine oleoresin components, was evaluated with the electroantennogram method. Both sexes were sensitive to monoterpenes, oxygenated terpenoid compounds, and oleoresin samples. The use of terpenes as host attractants and biochemical markers for resistance toD. sylvestrella is discussed.     

Bioethanol production from bio‐ organosolv pulps of Pinus radiata and Acacia dealbata

Wood chips from Pinus radiata and Acacia dealbata were pretreated with the white‐rot fungi Ceriporiopsis subvermispora and Ganoderma australe, respectively, for 30 days at 27 °C and 55% relative humidity, followed by an organosolv delignification with 60% ethanol solution at 200 °C for 1 h to produce pulps with high cellulose and low lignin content. Biotreatment for 30 days was chosen based on low weight and cellulose losses (lower than 4%) and lignin degradation higher than 9%. After organosolv delignification, pulp yield for P. radiata and A. dealbata pulps was 45–49% and 31–51%, respectively. P. radiata bio‐pulps showed higher glucan (93%) and lower lignin content (6%) than control pulps (82% glucan and 13% lignin). A. dealbata bio‐pulps also showed higher glucan (95%) and lower lignin content (2%) than control pulps (92% glucan and 4% lignin). Pulp suspensions at 2% consistency were submitted either to separate enzymatic hydrolysis and fermentation (SHF) or simultaneous enzymatic saccharification and fermentation (SSF) for bioethanol production. The yeast Saccharomyces cerevisiae was used for fermentation. Glucan‐to‐glucose conversion in the enzymatic hydrolysis of control and bio‐pulps of P. radiata was 55% and 100%, respectively, and it was 100% for all pulp samples case of A. dealbata. The highest ethanol yield (calculated as percentage of theoretical yield) during SHF of P. radiata control and bio‐pulps was 38% and 55%, respectively, and for A. dealbata control and bio‐pulps 62% and 69%, respectively. The SSF of P. radiata control and bio‐pulps yielded 10% and 65% of ethanol, respectively, and 77% and 82% for A. dealbata control and bio‐pulps, respectively. In wood basis, the maximum conversion obtained (g ethanol per kg wood) in SHF was 37% and 51% (for P. radiata and A. dealbata pulps, respectively) and 44% and 65% in SSF (for P. radiata and A. dealbata pulps, respectively) regarding the theoretical yield. The low wood‐to‐ethanol conversion was associated with low pulp yield (A. dealbata pulps), high residual lignin amount (P. radiata pulps) and the low pulp consistency (2%) used for SHF and SSF. Copyright © 2007 Society of Chemical Industry     

马尾松BCTMP生产实践初探

介绍广州造纸有限公司采用中国南方产马尾松木材为原料，生产新闻纸级用ＢＣＴＭＰ浆的情况，制浆主要设备是从加拿大ＫｖａｅｒｎｅｒＨｙｍａｃ公司引进的，生产能力为日产１５０ｔ。     

Exogenous Brassinosteroid Facilitates Xylem Development in Pinus massoniana Seedlings

Brassinosteroids (BRs) are known to be essential regulators for wood formation in herbaceous plants and poplar, but their roles in secondary growth and xylem development are still not well-defined, especially in pines. Here, we treated Pinus massoniana seedlings with different concentrations of exogenous BRs, and assayed the effects on plant growth, xylem development, endogenous phytohormone contents and gene expression within stems. Application of exogenous BR resulted in improving development of xylem more than phloem, and promoting xylem development in a dosage-dependent manner in a certain concentration rage. Endogenous hormone determination showed that BR may interact with other phytohormones in regulating xylem development. RNA-seq analysis revealed that some conventional phenylpropanoid biosynthesis- or lignin synthesis-related genes were downregulated, but the lignin content was elevated, suggesting that new lignin synthesis pathways or other cell wall components should be activated by BR treatment in P. massoniana. The results presented here reveal the foundational role of BRs in regulating plant secondary growth, and provide the basis for understanding molecular mechanisms of xylem development in P. massoniana.