一种基于丙型水驱曲线含水率预测新方法

针对水驱油田在进入特高含水期产液量上升快、常规含水率预测方法精度低的实际,从丙型水驱特征曲线基本原理出发,得出液油比与产液量的二项式关系,结合含水率与产液量之间的关系,推导出基于液油比的含水率预测模型。研究表明:随着累积产液量的增长,含水上升速度减缓;通过油田实际生产动态数据验证与对比,新建立的水驱油田含水率预测模型预测精度较高,有效拓展了丙型水驱曲线的应用范围,解决了特高含水期含水率预测精度低的问题,具有较强的推广应用价值。     

Self-assembled monolayers of p-toluene and p-hydroxymethylbenzene moieties adsorbed on iron by the formation of covalent bonds between carbon and iron atoms for protection of iron from corrosion

An iron electrode was modified by electrolytic reduction in deaerated acetonitrile solution of p-toluenediazonium tetrafluoroborate CH₃C₆H₄N₂BF₄ (TDFB) or p-hydroxymethylbenzenediazonium tetrafluoroborate HOCH₂C₆H₄N₂BF₄ (HOTDFB) below 10 °C to form a self-assembled monolayer (SAM) of toluene CH₃C₆H₄- or hydroxymethylbenzene HOCH₂C₆H₄- (HOMB) moiety, probably adsorbed on the electrode by the formation of a covalent bond between carbon and iron atoms, as shown in references. The protective ability of the layer was examined by polarization measurement of the electrode in an aerated 0.5 M NaCl solution. The protective efficiencies of these two SAMs were not high, around 30%, a little higher than that of the toluenethiol CH₃C₆H₄SH SAM which was anchored on iron via a coordinate bond between sulfur and iron atoms. The iron surfaces modified with TDFB and HOTDFB were characterized by contact angle measurement, FTIR reflection spectroscopy and X-ray photoelectron spectroscopy. The persistence in protection of iron against corrosion by coverage with the HOMB SAM was confirmed by polarization measurements after immersion in 0.5 M NaCl for a long period of the time.     

LY—1型曲线自动焊机的研制

对曲线自动焊机的研制方案进行对比,选择了机械靠模仿型式跟踪方案,并对其基本原理作了论述。经自动 TIG 焊接生产证明,焊缝质量优良,焊接成品率为95%,焊接生产率为1件/min。若对本机作些修改,适用于各种曲线焊件的自动焊。     

Preparation of a two-dimensional polymer film on passivated iron by modification of a carboxylate ion self-assembled monolayer with alkyltriethoxysilanes for preventing passive film breakdown

The effect of an ultrathin, regularly arranged polymer film on prevention of passive film breakdown on iron in the presence of chloride ion was investigated. The film of two-dimensional polymer was prepared by modification of a 16-hydroxyhexadecanoate ion self-assembled monolayer adsorbed on a passivated iron electrode with 1,2-bis(triethoxysilyl)ethane(C₂H₅O)₃Si(CH₂)₂Si(OC₂H₅)₃ and octyltriethoxysilane C₈H₁₇Si(OC₂H₅)₃. The pitting potentials of the passivated electrodes bare and covered with the polymer film were determined by anodic polarization measurements in a borate buffer solution containing 0.1 M of Cl⁻. The pitting potential of the coated electrode was higher than that of the uncoated one, indicating prevention of passive film breakdown. No breakdown was observed over the potential range in the passive and transpassive regions by covering the passive film with the well-arranged two-dimensional polymer film. The film was characterized by X-ray photoelectron and FTIR reflection spectroscopies and measurement of the contact angle with a drop of water.     

Preparation of self-healing protective films on a zinc electrode treated in a cerium(III) nitrate solution and modified with sodium phosphate and cerium(III) nitrate

Self-healing protective films were prepared on a zinc electrode previously treated in a Ce(NO₃)₃ solution by modification with Na₃PO₄ and Ce(NO₃)₃. The protective and self-healing abilities of the films were examined by polarization measurements and observation of pit formation after the electrode was scratched with a knife-edge crosswise and immersed in oxygenated 0.5 M NaCl at 30 °C for many hours. Mechanisms of the protective and self-healing activities were discussed using X-ray photoelectron spectroscopy and electron-probe microanalysis. The protective and self-healing abilities of the films prepared on the zinc electrode by treatment in the Ce(NO₃)₃ solution and modification with Na₃PO₄ plus Ca(NO₃)₂, Mg(NO₃)₂, Zn(NO₃)₂ or Ce(NO₃)₃ were summarized.     

The isoxazolidines: the effects of steric factor and hydrophobic chain length on the corrosion inhibition of mild steel in acidic medium

Several new isoxazolidines having varying degree of steric environment and hydrophobic chain length, prepared efficiently using single-step nitrone cycloaddition reactions, are tested for corrosion inhibition of mild steel in 1 M and 5 M HCl at 50-70 °C range by gravimetric and electrochemical methods. All compounds have shown very good corrosion inhibition efficiency (IE%) in acidic solution. Steric crowding around the nitrogen centres and hydrophobic chain lengths as well as increase in temperature (in the presence of the inhibitor in the higher concentration range 100-400 ppm) are found to increase the inhibition efficiency of the isoxazolidines. Thermodynamic parameters (ΔG°_ads, ΔH°_ads, ΔS°_ads) for the adsorption process and kinetic parameters for the metal dissolution (or hydrogen evolution) reaction in the presence of one of the isoxazolidines were determined. Experimental results agree with the Temkin adsorption isotherm. The inhibition of corrosion in 1 M HCl, influenced by both physi- and chemi-sorption, was found to be under mixed control, but predominantly under cathodic control.     

Corrosion behaviour of brazed multilayer material AA4343/AA3003/AA4343: Influence of coolant parameters

This paper is the second part of a work devoted to corrosion in brazed AA4343/AA3003/AA4343 materials on the water side of automotive heater cores. In the first part of the study [S. Tierce, N. Pébère, C. Blanc, C. Casenave, G. Mankowski, H. Robidou, Electrochim. Acta 52 (2006) 1092], corrosion initiation in the surface layer (i.e. the residual cladding) has been investigated. It has been associated to defective sites in the passive film covering the alloy. The defective sites are linked to α-Al(Mn,Fe)Si particles built up during brazing process. Interactions between α-Al(Mn,Fe)Si particles and the matrix are responsible for the observed behaviour. The present study focuses on the propagation of corrosion through the material in neutral water–ethylene glycol mixtures with and without chlorides. Comparison of the electrochemical behaviour of the three layers of the brazed material (i.e. the residual cladding, the “band of dense precipitates (BDP)” and the core material) revealed that the residual cladding was nobler than the BDP and the core material and thus that the corrosion should propagate through the inner layers due to galvanic coupling: the inner layers constitute the anode and the residual cladding the cathode. Increasing the ethylene glycol content in the water–ethylene glycol mixture decreased the rate of consumption of the materials whereas addition of chloride ions increased it. Mass variation measurements of brazed material in different solutions containing the degradation products of ethylene glycol showed that only glycolate ions had a slight detrimental effect. Corrosion tests performed in heater core tubes allowed the propagation mechanisms to be confirmed.     

Semi‐Regular Triangle Remeshing: A Comprehensive Study

Semi‐regular triangle remeshing algorithms convert irregular surface meshes into semi‐regular ones. Especially in the field of computer graphics, semi‐regularity is an interesting property because it makes meshes highly suitable for multi‐resolution analysis. In this paper, we survey the numerous remeshing algorithms that have been developed over the past two decades. We propose different classifications to give new and comprehensible insights into both existing methods and issues. We describe how considerable obstacles have already been overcome, and discuss promising perspectives.     

Particle Level Set Advection for the Interactive Visualization of Unsteady 3D Flow

Typically, flow volumes are visualized by defining their boundary as iso‐surface of a level set function. Grid‐based level sets offer a good global representation but suffer from numerical diffusion of surface detail, whereas particle‐based methods preserve details more accurately but introduce the problem of unequal global representation. The particle level set (PLS) method combines the advantages of both approaches by interchanging the information between the grid and the particles. Our work demonstrates that the PLS technique can be adapted to volumetric dye advection via streak volumes, and to the visualization by time surfaces and path volumes. We achieve this with a modified and extended PLS, including a model for dye injection. A new algorithmic interpretation of PLS is introduced to exploit the efficiency of the GPU, leading to interactive visualization. Finally, we demonstrate the high quality and usefulness of PLS flow visualization by providing quantitative results on volume preservation and by discussing typical applications of 3D flow visualization.     

Extraction Of Feature Lines On Surface Meshes Based On Discrete Morse Theory

We present an approach for extracting extremal feature lines of scalar indicators on surface meshes, based on discrete Morse Theory. By computing initial Morse‐Smale complexes of the scalar indicators of the mesh, we obtain a candidate set of extremal feature lines of the surface. A hierarchy of Morse‐Smale complexes is computed by prioritizing feature lines according to a novel criterion and applying a cancellation procedure that allows us to select the most significant lines. Given the scalar indicators on the vertices of the mesh, the presented feature line extraction scheme is interpolation free and needs no derivative estimates. The technique is insensitive to noise and depends only on one parameter: the feature significance. We use the technique to extract surface features yielding impressive, non photorealistic images.