Evaluation of Polyester Resin as a New Compatibilizer for SBR/PVC Blends

A polyester (PE) based on the glycolyzed products of PET was prepared and added in different concentrations to a series of SBR/PVC blends. The addition of the polyester showed that all properties of SBR/PVC blends were improved by incorporation of PE. Highest mechanical strength values were obtained at a polyester concentration of 7.5 phr. Thermal analysis as well as dynamic mechanical properties of SBR/PVC blends after the addition of 7.5 and 10 phr polyester indicated one single glass transition temperature. The dielectric losses (?") were analyzed in the frequency domains in the two terms of Fröhlich related to the Maxwell Wagner effect and the orientation of the aggregates caused by the movement of the main chain. The permittivity (?') values were found to increase by increasing the polyester content. This increase was followed by a decrease in the ?" up to a 7.5 phr polyester content after which no pronounced change was noticed.     

PBT共混改性研究最新进展

综述了最近几年国内外聚对苯二甲酸丁二醇酯(PBT)共混改性的研究进展,分类介绍PBT/聚烯烃、PBT/同系聚酯、PBT/液晶、PBT/弹性体、PBT/聚碳酸酯等不同共混体系,讨论了各体系中的相行为、相容性、热稳定性、力学性能等,并对该类共混物的发展趋势作了简要的分析。     

乙烯分离技术分析

从技术先进性、能耗、流程复杂性和运行稳定性等诸多方面对占据乙烯市场的三大分离技术进行了分析。并认为用户在选择分离技术时应综合考虑各方面因素，把握重点，选择出适合的技术。     

塑料啤酒瓶开发现状

介绍了塑料啤酒瓶的优点,详细介绍了各种以PET为基础的改性啤酒瓶材料,并列举了大量的开发实例。     

高负荷下聚酯工艺参数的优化

介绍原 2 0万t/a装置增容到 2 4万t/a时的工艺参数优化。PTA平均粒径 95～ 110 μm ,n(EG) /n(PTA) =2 .6～ 2 .7,酯化液位 63 %～ 64 % ,温度 2 92～ 2 96℃ ;乙二醇锑催化剂 ,稳定EG、DEG量 ,选择TiO2 消光剂 ,滤除凝聚粒子 ;预缩聚温度 2 87～ 2 89℃ ,压力 2 .4～ 2 .8kPa,液位 42～ 48cm ;终缩聚温度 2 90～ 2 91℃ ,压力 2 .5～ 3 .0hPa,液位 60～ 62cm ,搅拌速度 2 .7r/min。     

乙烯二聚制高纯丁烯－1技术经济评价

本文对生产高纯度丁烯－１的Ａｌｐｈａｂｎｔｏｌ工艺进行了技术经济评价，认为该工艺条件简单、反应条件温和，而且投资少，所以很适合事在发展中国家应用。     

Crystallization and phase transformation kinetics of poly(1-butene)/MWCNT nanocomposites

Poly(1-butene)/MWCNT nanocomposites were prepared by simple melt processing technique. Crystallization, crystal-to-crystal phase transformation and spherulitic morphology were studied using differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and optical microscopy (OM). The non-isothermal crystallization exhibited higher values of Z_t derived from Avrami theory and lower values of F(T) obtained from Avrami-Ozawa analysis, while the isothermal crystallization revealed a significant increase in crystallization temperatures and lower crystallization half times compared to pristine PB. The observed changes in the crystallization kinetics were ascribed to the enhanced nucleation of PB in the presence of MWCNT. The nucleating activity calculated from the non-isothermal crystallization data revealed that the MWCNTs provide an active surface for the nucleation of PB. The optical micrographs exhibited significantly smaller crystallites with disordered morphology for the nanocomposites compared to the well defined spherulitic morphology for pristine PB. The rate of phase transformation from kinetically favored tetragonal to thermodynamically stable hexagonal form was noticeably enhanced as evidenced by the reduction in the half time for phase transformation from 58 h to 25 h for PB reinforced with 7% MWCNT.     

Production of agrochemical from waste polyesters

In this study, agrochemical was produced from waste polyesters. Reactions of waste polyesters [poly (ethylene terephthalate) (PET) and poly (butylene terephthalate) (PBT)] powder with ethylene glycol (EG) in the presence of tetrahydrofurane (THF) using 0.003 mol lead acetate as a catalyst were carried out in a batch reactor at 470 K and at atmospheric pressure conditions. Reactions were undertaken with various particle size ranges from 50 to 512.5 μm, and reaction time from 30 to 70 min for reactions of polyesters. Low molecular weight product of polyester was obtained during this process. In the next stage, hydroxylamine hydrochloride (HAHC), cyclohexylamine (CHA), and potasium hydroxide (KOH) solution were introduced to convert low molecular weight product of polyester into terephthalohydroxamic acid (TPHA) by introduction of HCl (Hydrochloric Acid) as per stoichiometric requirement. TPHA can be used as an agrochemical (insecticide) with appreciable efficiency. To increase the polyester conversion rate, external catalyst (0.003 mol lead acetate) was introduced during the reaction. The product was deposited on the surface of unreacted polyester, which was removed from the surface by introducing dimethyl sulfoxide (DMSO). To accelerate the reaction rate, DMSO, CHA, and THF were introduced during the reaction, which has an industrial significance. Depolymerization of polyester was proportional to the reaction time. Depolymerization of polyester was inversely proportional to the particle size of polyester. Analyses of value‐added product (TPHA) and byproducts [EG and BD (1,4‐butanediol)] as well as polyesters were undertaken. A kinetic model is developed, and experimental data simulated with it, which was consistent with the model. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2504–2510, 2006     

The first measurement of an absolute surface concentration of reaction intermediates in ethylene hydrogenation

The first measurement of a turnover rate with respect to surface intermediate concentration in a high pressure heterogeneous catalytic reaction is reported. By using infrared-visible sum frequency generation to study the hydrogenation of ethylene on Pt(111), it was found that the surface concentration of -bonded ethylene, the key reaction intermediate, represented approximately 4% of a monolayer. Thus the absolute turnover rate per surface adsorbed ethylene molecule is 25 times faster than the rate measured per platinum atom. To explain these results, we propose a model of weakly adsorbed ethylene intermediates reacting on atop sites.     

浅谈涤纶FDY生产新技术──TCS一步法的特点

ＴＣＳ系指德国巴马格公司最新推出的细旦涤纶纺丝技术，该技术突破了热辊拉伸这一传统的涤纶纺丝模式，以甬道中的热空气为传热媒体，使丝条在稳定均一的热环境中完成拉伸过程。ＴＣＳ与ＣＷ６超高速卷绕机配合使用，可在极高的纺速下一次形成比较完善的纤维结构，从而获得条干和染色性能优异的成品纤维。该文介绍了该技术的工艺流程、设备结构和产品特点等。