电冶矾土刚玉质自流浇注料的研究

以电冶矾土刚玉为骨料有利于提高浇注料的自流性能 ;六偏磷酸钠分散剂对Al2 O3泥浆流变性能有较理想的改善作用 ;电冶矾土刚玉质自流浇注料具有优良的抗渣性能 ,这主要同浇注料的显微结构和电冶矾土刚玉骨料的性能相关。     

水力旋流分离器在含聚合物污水处理中的试验研究

水力旋流分离器是近年来新发展起来的一种新的油水分离设备,它同重力分离设备相比,具有体积小、重量轻、分离效率高、结构紧凑、工艺简单、操作费用低等特点。本文对旋流器的工作原理以及在双河联合站含聚合物污水中的现场放大试验情况进行了介绍,该项技术目前已在河南油田污水处理系统中得到了推广应用。     

铝炭制品防氧化涂料的作用机理

采用热分析等研究方法，分析了铝炭制品的氧化过程，研究了以阻断铝炭制品与氧气接触来实现防氧化的硼硅酸盐系涂料的高温特性和防氧化机理，以及不同结合剂对涂料与铝炭制品界面行为的影响。     

Carbonaceous adsorbents from sewage sludge and their application in a combined activated sludge-powdered activated carbon (AS-PAC) treatment

In this study, waste biological sludge is converted to an adsorbent by chemical activation with sulphuric acid. The adsorbent obtained is then applied to the aerated vessel of an activated sludge process treating glucose and phenol to improve the quality of the treated effluent. The sludge-based carbonaceous adsorbent was found to be mesoporous in nature, with a good adsorption capacity for large molecular weight compounds and limited removal efficiency for smaller molecules such as phenol. The addition of carbon, either sludge-based or commercial, enhanced phenol removal from 58% to 98.7% and from 87% to 93% the organic matter removal as measured by the chemical oxygen demand (COD) when operated with feed concentrations of 100 mg phenol/l and 2500 mg COD/l. No differences were found between the activated sludge-activated carbon bench scale continuous reactors operating with either commercial or sludge-based adsorbents in spite of the higher adsorption capacity of the former. It is suggested that powdered adsorbent bioregeneration in the combined AS-PAC system may be impaired by the obstruction of pores due to bacterial growth, the effect being more important for the commercial activated carbon with a narrower pore size distribution.     

炭黑表面的纳米结构对橡胶的补强作用

通过扫描隧道显微镜(STM)技术了解到炭黑粒子表面的鳞片状石墨微晶组成的纳米级精细结构，并研究炭黑对橡胶的补强机理。研究表明，炭黑表面的纳米结构使橡胶分子链网络缠绕在炭黑表面，并将外来应力分散到其它分子网络上，共同分担应力，使橡胶弹性体体系不至于迅速破坏。     

Rubber–clay nanocomposite by solution blending

Ethylene vinyl acetate rubber (45% vinyl acetate content, EVA‐45) and organomodified clay (12Me‐MMT) composites were prepared by solution blending of the rubber and the clay. A combination of X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy studies showed that the composites obtained are on the nanometer scale. The measurements of the dynamic mechanical properties for different compositions over a temperature range (?100 to +100°C) showed that the storage moduli of these rubber–clay nanocomposites are higher above the glass to rubber transition temperature compared to the neat rubber. The tensile strength of the nanocomposites is about 1.6 times higher than that of the EVA‐45. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2216–2220, 2003     

活性炭材料脱除烟气中SO_2的机理研究

介绍了活性炭材料的脱硫机理;论述了烟气中O2和H2O在脱硫过程中的作用,O2与炭表面作用形成的C-O中间物可氧化SO2,H2O具有洗脱H2SO4、提供质子及水解作用;活性炭材料表面的碱性对脱硫具有促进作用,炭表面的催化活性位能够有效催化转化SO2。     

雷达波吸收性聚氨酯泡沫塑料的研究

通过对碳纤维、碳纤维/纤维Ⅰ和碳纤维/纤维Ⅱ分别填充的硬质聚氨酯泡沫塑料的吸波性能的研究,探讨了纤维类型、纤维含量、样品厚度的相关变化对塑料样板吸波性能的影响。结果表明,填充碳纤维的硬质聚氨酯泡沫塑料的吸波频带较窄;纤维Ⅰ和纤维Ⅱ分别与碳纤维混杂均可展宽频带;吸波性能随塑料样板厚度的增加而增强,随纤维Ⅱ含量的增加,吸收峰向低频移动,峰值增大。     

Rubber‐toughened polypropylene nanocomposite: Effect of polyethylene octene copolymer on mechanical properties and phase morphology

Rubber‐toughened polypropylene (PP)/org‐Montmorillonite (org‐MMT) nanocomposite with polyethylene octene (POE) copolymer were compounded in a twin‐screw extruder at 230°C and injection‐molded. The POE used had 25 wt % 1‐octene content and the weight fraction of POE in the blend was varied in the range of 0–20 wt %. X‐ray diffraction analysis (XRD) revealed that an intercalation org‐MMT silicate layer structure was formed in rubber‐toughened polypropylene nanocomposites (RTPPNC). Izod impact measurements indicated that the addition of POE led to a significant improvement in the impact strength of the RTPPNC, from 6.2 kJ/m² in untoughened PP nanocomposites to 17.8 kJ/m² in RTPPNC containing 20 wt % POE. This shows that the POE elastomer was very effective in converting brittle PP nanocomposites into tough nanocomposites. However, the Young's modulus, tensile strength, flexural modulus, and flexural strength of the blends decreased with respect to the PP nanocomposites, as the weight fraction of POE was increased to 20 wt %. Scanning electron microscopy (SEM) was used for the investigation of the phase morphology and rubber particles size. SEM study revealed a two‐phase morphology where POE, as droplets was dispersed finely and uniformly in the PP matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3441–3450, 2006     

颗粒活性炭的特性参数与吸附性能的关系试验

采用活性炭进行饮用水的深度处理,选择适合原水水质的活性炭至关重要,通过6种不同颗粒活性炭特性参数的测试,对饮用水有机物的吸附试验以及吸附等温线的测定,结果表明:针对颗粒活性炭的筛选,碘值,亚甲蓝值,吸附等温线的KF及斜率1/n值均不能单独作为评价筛选活性炭优劣的指标,而应综合考虑颗粒活性炭的孔径分布与原水中有机物的相对分子质量分布相匹配等。研究还表明:碘值,亚甲蓝值,吸附等温线的KF存在一定的相关性,从颗粒活性炭的特性参数和吸附性能参数可以推测活性炭滤柱试验吸附效果。颗粒活性炭用于饮用水深度处理,能去除水中相对分子质量小的有机物,处理的水量为颗粒活性炭体积的4800倍时,对CODMn的去除率为15%左右。