改进尿素包装工艺 不断提高产品质量

通过对尿素包装工艺的不断改进，提高了尿素粒度、减少粉尘含量，效果明显。     

Reliability and scale effect in toughness of concrete structures

In the present work, the distribution of the random toughness characteristics (i.e. critical energy release rate, G_1c) has been evaluated on the basis of experimental observations. Fracture test results from three groups of geometrically similar concrete specimens of size (width×total depth×thickness), 420×420×50–1680×1680×200 mm³, made with different maximum aggregate size of 9.5, 19, 38, and 76 mm were analyzed using a recently proposed distribution of extremes. In applications of probability, it is important to use an appropriate distribution type and adequate techniques for estimating the parameters of distribution. In this study, a new type distribution of minima is employed for probability computations. It was noticed that the entropy of distribution increases with the crack length, i.e. the uncertainty of toughness, G_1c, value increases with crack length. A non-linear reduction of the maximum allowable splitting force with the defect size, a, was noticed. For large specimens, the maximum allowable splitting load is more sensitive to the required reliability level than that for small specimens. Reliability increases with aggregate size when all other conditions were constant.     

Comparison of the GFFF and LALLS Methods for the Measurement of Starch Granule Size Distribution in Spring Barley Caryopses

A newly developed method GFFF (Gravitational Field‐Flow Fractionation) and the well known method LALLS (Low Angle Laser Light Scattering) were used to assess starch granule size distribution of ten varieties of spring barley. As a distribution criterion, the ratio of starch granule content larger than 8 μm (type A) and smaller than 8 μm (type B) was chosen. Both methods divided the observed set in a similar way. Varieties Akcent, Forum and Atribut formed a variety set with the highest ratio of large and small starch granules. Varieties Scarlet and Kompakt had intermediate ratios. The remaining five varieties Amulet, Novum, Olbram, Tolar and Krona had the lowest ratios of large and small starch granules. Statistical analysis showed that there was a highly significant correlation between the GFFF and LALLS methods.     

ARAM·ARIES SPM-Lite便携式遥测地震数据采集系统简介

ARAM·ARIES SPM-Lite便携式遥测地震数据采集系统是加拿大GEO-X公司在2002年下半年推出的全新小型便携式地震数据采集系统。该仪器运用了当今最先进的计算机制造技术、网络化技术和微电子技术,除继承了ARAM-ARIES地震数据采集系统所有功能和技术外,它还简化了硬件结构,使体积更小,重量更轻,功能性更强。更加适应地矿、煤田、丛林和山区进行地震勘探。     

Optimal ensemble construction via meta-evolutionary ensembles

In this paper, we propose a meta-evolutionary approach to improve on the performance of individual classifiers. In the proposed system, individual classifiers evolve, competing to correctly classify test points, and are given extra rewards for getting difficult points right. Ensembles consisting of multiple classifiers also compete for member classifiers, and are rewarded based on their predictive performance. In this way we aim to build small-sized optimal ensembles rather than form large-sized ensembles of individually-optimized classifiers. Experimental results on 15 data sets suggest that our algorithms can generate ensembles that are more effective than single classifiers and traditional ensemble methods.     

浅议铵梯炸药质量检验中的三个问题

文章探讨了GB 12437-2000标准规定的产品检验项目中,中包浸水试验的科学性问题和对批产品进行抽样时的样本代表性问题以及使用多段爆速仪测试爆速时应注意的样本量问题.     

纳米颗粒的测量与表征

介绍了用于纳米颗粒测量的电镜观察法、X射线衍射线宽法、激光粒度分析法、比表面积法、颗粒沉降法、扫描探针显微术以及小角X射线散射等,并对其测量原理、测量过程、适用范围及测量方法的优缺点进行了讨论。     

Effect of electric field on the hydrodynamics of fluidized nanoparticles

The effect of electric field on the hydrodynamics of nanoparticles was studied in a fluidized rectangular bed, with electrodes attached to two parallel walls. It was shown that the electric field of the order of 3 times the gravity markedly decreased the bed expansion and increased the solids volume fraction of nanoparticles fluidized by air. In these experiments, a light diode assembly was utilized to infer the local solids volume fractions within a rectangular bed of 10 nm silica particles. These experimental measurements yielded a two dimensional solids volume fraction distribution within the rectangular bed. The experimental results provided some new insights into the distribution of solids within the bed. The agglomerate diameters were computed using a momentum balance with the drag given by the Ergun equation and the empirical Richardson-Zaki method. Both methods yielded agglomerate diameters of the order of 100 μm and showed dependence on the strength of the electric field. The electric field decreased the granular temperature of the nanoparticles.     

Highly ordered anodic alumina nanotemplate with about 14 nm diameter

A novel method for the fabrication of highly ordered nanopore arrays with very small diameter of 14 nm was demonstrated by using low-temperature anodization. Two-step anodization was carried out at 25 V, sulfuric acid concentration of 0.3 M, and electrolyte temperature of −15 °C. After anodization, a regular pore array with mean diameter of 14 nm and interpore distance of 65 nm was formed. The pore diameter and regular arrangement were confirmed by scanning electron microscopy (SEM) and fast Fourier transformation (FFT), respectively. The present results strongly suggest that the diameter of pores in a highly ordered alumina template can be reduced by lowering the anodization temperature.     

High training set size reduction by space partitioning and prototype abstraction

Instance-based learning methods like the nearest neighbour classifier generally suffer from the indiscriminate storage of all training instances, resulting in large memory requirements and slow execution speed. In this paper, new training set size reduction methods based on prototype generation and space partitioning are proposed. Experimental results show that the new algorithms achieve a very high reduction rate with still an important classification accuracy.