视频特技切换台的原理与功能

本文较系统、通俗地介绍了模拟视频特技切换台的矩阵输入、混合/效果放大器(M/E)、下游键、系统控制和同步发生器等电路单元,介绍了特技切换台的切换、混合、扫变、键控的基本原理和功能。     

Detection of multiple cracks using frequency measurements

A method for detection of multiple open cracks in a slender Euler-Bernoulli beams is presented based on frequency measurements. The method is based on the approach given by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841], transverse vibration modelling through transfer matrix method and representation of a crack by rotational spring. The beam is virtually divided into a number of segments, which can be decided by the analyst, and each of them is considered to be associated with a damage parameter. The procedure gives a linear relationship explicitly between the changes in natural frequencies of the beam and the damage parameters. These parameters are determined from the knowledge of changes in the natural frequencies. After obtaining them, each is treated in turn to exactly pinpoint the crack location in the segment and determine its size. The forward, or natural frequency determination, problems are examined in the passing. The method is approximate, but it can handle segmented beams, any boundary conditions, intermediate spring or rigid supports, etc. It eliminates the need for any symbolic computation which is envisaged by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841] to obtain mode shapes of the corresponding uncracked beams. The proposed method gives a clear insight into the whole analysis. Case studies (numerical) are presented to demonstrate the method effectiveness for two simultaneous cracks of size 10% and more of section depth. The differences between the actual and predicted crack locations and sizes are less than 10% and 15% respectively. The numbers of segments into which the beam is virtually divided limits the maximum number of cracks that can be handled. The difference in the forward problem is less than 5%.     

Efficient return algorithms for associated plasticity with multiple yield planes

A new return method for implicit integration of linear isotropic yield criteria is presented. The basic idea is to perform all the manipulations in the principal stress space and thereby achieve very simple formulae for calculating the plastic corrector stresses, based on the constant gradient of such criteria. The return formulae are in closed form and no iteration is required. The method accounts for three types of stress return: return to a single yield plane, to a discontinuity line at the intersection of two yield planes and to a discontinuity point at the intersection between three or more yield planes. The infinitesimal and the consistent elastoplastic constitutive matrix are calculated for each type of stress return, as are the conditions to ascertain which type of return is required. The method is exemplified with the Mohr–Coulomb yield criterion. Copyright © 2005 John Wiley & Sons, Ltd.     

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation

The authors of this paper synthesized a series of amphiphilic triblock copolymers of polystyrene-b-poly(ethylene glycol)-b-polystyrene (PS-PEG-PS) having different PEG/PS ratios with nearly identical molecular weights of the entire copolymers. The interfacial interactions in the composites consisting of carbon black and the copolymers can thus be tailored. When these conducting composites are exposed to certain solvent vapors, their electrical resistances greatly increase, showing the gas sensitivity. The present work indicated that this switching behavior is controlled by the structural relaxation of the composites because matrix swelling acts as the main mechanism. The response time has been correlated with absolute temperature by Arrhenius equation, and the estimated activation energy reflects mobility of the fillers involved in the solvent induced expansion of the surrounding polymer. Therefore, by using the gas sensibility of the conductive composites, the structure evolution of the composite materials in solid state and the effect of filler/matrix interfacial interaction on the relaxation property of the matrix polymer has been inspected. It was found that lower activation energy represents stronger interfacial interaction in case good solvent of the matrix was used for the test.     

Solving regularized least squares with qualitatively controlled adaptive cross‐approximated matrices

The adaptive cross‐approximation (ACA) technique is applied to accelerating an inverse‐problem solver that estimates charge distribution on a dielectric spacer. The ACA generates an approximated system‐matrix that enables us to carry out high‐speed inverse calculation. We designed an approximation procedure based on ACA with some additional concepts, that is, (a) partitioning of matrix based on algebraic information, (b) approximation quality control based on matrix norms, and so on. The tested solver (LSQR for regularized least squares) with ACA demonstrates about 10 times faster performance than that without ACA. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(3): 10–18, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20326     

Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan,and heparin composite scaffold

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained many interests in recent year. In this study, the development of a chitosan‐heparin artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of heparin (Hep) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The Chito‐Hep composite AECMs were, respectively, crosslinked with glutaraldehyde, as well as cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC/NHS) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined by FT‐IR analysis. In physiological buffer solution (PBS), the EDC/NHS‐crosslinked Chito‐Hep composite AECM showed a relative lower water retention ratio than its glutaraldehyde‐crosslinked counterparts. The EDC/NHS‐crosslinked Chito‐Hep composite AECMs showed excellent biocompatibility, according to the results of the in vitro cytotoxic test. This result suggested that the EDC/NHS‐crosslinked Chito‐Hep composite AECMs might be a potential biomaterial for scaffold‐guided tissue engineering applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Numerical experiments of preconditioned Krylov subspace methods solving the dense non-symmetric systems arising from BEM

Discretization of boundary integral equations leads, in general, to fully populated non-symmetric linear systems of equations. An inherent drawback of boundary element method (BEM) is that, the non-symmetric dense linear systems must be solved. For large-scale problems, the direct methods require expensive computational cost and therefore the iterative methods are perhaps more preferable. This paper studies the comparative performances of preconditioned Krylov subspace solvers as bi-conjugate gradient (Bi-CG), generalized minimal residual (GMRES), conjugate gradient squared (CGS), quasi-minimal residual (QMR) and bi-conjugate gradient stabilized (Bi-CGStab) for the solution of dense non-symmetric systems. Several general preconditioners are also considered and assessed. The results of numerical experiments suggest that the preconditioned Krylov subspace methods are effective approaches solving the large-scale dense non-symmetric linear systems arising from BEM.     

Improvement of photon collection in Cu(In,Ga)Se2 solar cells and modules by fluorescent frequency conversion

Fluorescent photon down conversion for the improvement of the blue response of ZnO/CdS/Cu(In,Ga)Se₂ heterojunction solar cells and modules is investigated. Fluorescent dyes of the series Lumogen® F are analyzed by optical transmission and reflection as well as by photoluminescence measurements. A spectral transfer matrix formalism is introduced that allows to predict the suitability of a luminescent dye as a down-converter for a given solar cell from its absorption/emission properties. We find that Lumogen® F Violet 570 and Lumogen® F Yellow 083 as well as a combination of both yields improvements for Cu(In,Ga)Se₂ solar modules. Particularly, we find that the short circuit current density of a Cu(In,Ga)Se₂ mini-module is improved by 1.5 mA cm^− 2 when applying a varnish with a combination of Lumogen® F Violet and Yellow. About 0.5 mA cm^− 2 of this improvement is due to a reduced overall reflectance and an improvement of 1 mA cm^− 2 results from the frequency conversion by the dyes.